Legitunlocks.com
Martview RB-02

Post here success Reset FRP story with Octoplus FRP Tool

Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
824
india
Skype
[email protected]
Sonork ID
1681209
Tecno In1 One Click Frp

7736
​
Welcome to Octoplus FRP Tool v.1.8.1.1
Platform: TECNO
Selected model: IN1
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM5
Detecting Chip Version...
HW Chip: MT6739: 0699.0000
HW Version: 8A00.CB00.0002.0000
Connecting...
Brom Version: FF
BootLoader Version: 03
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017/12/14.17:12_396299, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
eMMC Flash: .15010051.4536334D.4203F752.C6B2953D
eMMC Flash: Samsung: QE63MB
Internal RAM size: 256 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO IN1
Device: TECNO-IN1
Android version: 8.1.0
Display ID: IN1-H398A-O-190215V268
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO IN1_26-10-2019_17-19-26.dump file
Performed by 1.8.1.1 Software version.


Code:
 
Deepesh Sharma

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,161
India
Sonork ID
100.1614172
Itel A44 Remove Frp
 
  • Like
Reactions: Dr.sunilsingh
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
824
india
Skype
[email protected]
Sonork ID
1681209
TECNO i3 FRP lock is successfully

7872

​
Code: 
Welcome to Octoplus FRP Tool v.1.8.1.1
Platform: TECNO
Selected model: I3
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Tecno_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4531334D.420D9382.9B08C213
eMMC Flash: Samsung: QE13MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: TECNO
Model: TECNO i3
Device: TECNO-i3
Platform: mt6737m
Android version: 7.0
Display ID: i3-H375C1-N-IN-170823V203
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as TECNO_TECNO i3_01-11-2019_10-56-25.dump file
Performed by 1.8.1.1 Software version.
 
nobichanmaruf

nobichanmaruf

Friend's Martview
Mar 19, 2017
218
573
Bangladesh
Skype
nobichanmaruf
Sonork ID
100.1672479
Huawei LDn LX2 FRP Remove Done By Octoplus FRP Tool

Welcome to Octoplus FRP Tool v.1.8.3.0
Platform: HUAWEI
Selected model: LDN-LX2
Put the phone in FastBoot Mode:
  1. Remove SD and SIM cards from the phone
  2. Power phone OFF
  3. Press and hold "Vol-" and insert USB cable
  4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Operation was failed!
Performed by 1.8.3.0 Software version.

Platform: HUAWEI
Selected model: LDN-LX2
Put the phone in FastBoot Mode:
  1. Remove SD and SIM cards from the phone
  2. Power phone OFF
  3. Press and hold "Vol-" and insert USB cable
  4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-LX2
Phone SN: JYNBB18524155841
Phone IMEI: 869167036110598
SW version: LDN-LX2 8.0.0.161(C636)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.8.3.0 Software version.


​
 
M

mmurugan1978

Active Member
Nov 6, 2019
31
9
HUAWEI-JAT-L29 FRP REMOVED

Platform: HUAWEI
Selected model: JAT-L29
Put the phone into Brom mode:
  1. Attach testpoint as shown in Help manual;
  2. Connect USB cable;
  3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM6
Port name: SAMSUNG Mobile USB Modem #38
Detecting Chip Version...
HW Chip: MT6762: 0766.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010051.4436334D.42013413.D40F756D
eMMC Flash: Samsung: QD63MB
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Android version: 9
Display ID: System 9.0.1.25(029A)
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_JAT-L29_14-02-2020_11-49-20.dump file
Performed by 1.8.6.0 Software version.
 
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
824
india
Skype
[email protected]
Sonork ID
1681209
LENOVO Lenovo K8 Plus XT1902-2 FRP lock successfully

10911


Platform: LENOVO
Selected model: XT1902-2
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM14
Port name: PreLoader USB VCOM Port (COM14)
Detecting Chip Version...
HW Chip: MT6757: 0551.0000
HW Version: 8A00.CB00.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.17
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: preloader
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .15010047.5836424D.42038B68.D6CB7473
eMMC Flash: Samsung: GX6BMB
Internal RAM size: 256 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo K8 Plus
Device: marino
Platform: mt6757
Android version: 8.0.0
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Lenovo_Lenovo K8 Plus_25-02-2020_16-23-26.dump file
Performed by 1.8.6.0 Software version.
 
You must log in or register to reply here.
Top