Post All Your Success Stories With Your CS-Tool

[maanarman]

A120 Qmobile Write Flash Done

 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile A120
 Android Ver    : 4.2.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.JB3.MP.V1
 SW Version     : ALPS.JB3.MP.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60


 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:40
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Lenovo A319 Read/Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : Lenovo
 Phone Model    : Lenovo A319
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: A319_ROW_DS_S313_150427
 SW Version     : A319_ROW_DS_S313_150427
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:04:31
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Qmobile A290 Read/Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile A290
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:59
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Qmobile X30 Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TINNO
 Phone Model    : QMobile X30
 Android Ver    : 4.4.2
 CPU/Processor  : MT6572
 MTK Project ver: ALPS.KK1.MP7.V1
 SW Version     : ALPS.KK1.MP7.V1
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:02
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Qmobile S4 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6580
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100513832334D42
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : 150100513832334D42
 EMMC Size: 16GB,  usable capacity: 14.57GB
 EMMC Name: eMMC_Samsung_Q823MB
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 New EMI config is detected, auto added it to User Database, cnt=1
 Saved to: C:\CS-Tool\CST_MainSoftware\private\db\emi\
 Image Format: General
 Downloading lk ......ok
 Downloading boot ......ok
 Downloading recovery ......ok
 Downloading logo ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:11:11
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[yasinssss]

i need help how to read flash file spd sc7731e 8.1.0

 

[maanarman]

QMobile i9 Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i9
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.KK1.MP1.V2.10
 SW Version     : ALPS.KK1.MP1.V2.10
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading preloader ......ok
 Updating rom info ......ok
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:08
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

QMobile Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : QMobile
 Phone Model    : QMobile i5
 Android Ver    : 4.2.2
 CPU/Processor  : MT6582
 MTK Project ver: ALPS.JB5.MP.V1.6
 SW Version     : ALPS.JB5.MP.V1.6
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:10
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 110100303034473930
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 110100303034473930
 EMMC Size: 4GB,  usable capacity: 3.69GB
 EMMC Name: eMMC_Toshiba_TYD0FH221618RA
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading ebr2 ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Downloading fat ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:40
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

QMobile I6I Write Flash Done

Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6580
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 150100464A32374D42
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : 150100464A32374D42
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Samsung_FJ27MB
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading lk ......ok
 Downloading boot ......ok
 Downloading recovery ......ok
 Downloading logo ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:15
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Lemovo A328 Write Flash Done

Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : Lenovo
 Phone Model    : Lenovo A328
 Android Ver    : 4.4.2
 CPU/Processor  : MT6582
 MTK Project ver: A328_ROW_S326_150129
 SW Version     : A328_ROW_S326_150129
 Userdata State : Normal
 
 Action completed
 Time taken : 00:00:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:29
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Qmobile X30 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447326111
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447326111
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H4G2a
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:35
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Qmobile A300 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM1028 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: FE
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 Warning: failed to init dram, loading default settings
 Waiting for DRAM detection...
 Selected: 2/7    ...
 Done. Size=0x0000000020000000
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 usb switching to high speed ...
 New Port: COM145   ......ok
 switch done.
 Load File : F:\CHINA\QMOBILE\A300 Q MOBILE OK  MTK6572_1403021306\MTK6572_1403021306.bin
 Image Size: 0x00000000A00005F8
 
 Programming Flash Image...
 Programming Flash Image Completed.
 
 Action completed
 Time taken : 00:18:29
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Lenovo A328 Write FF Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CA01
 CPU_ID: 6582
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65820000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading preloader ......ok
 Updating rom info ......ok
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:05:02
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Oale X2 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM24 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 6580
 CPU_SW: 0000
 CPU_HW: CA00
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: F40122426977696E20
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : F40122426977696E20
 EMMC Size: 8GB,  usable capacity: 7.21GB
 EMMC Name: EMMC_Device_Biwin
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading lk ......ok
 Downloading boot ......ok
 Downloading recovery ......ok
 Downloading logo ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:06:23
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2

 

[maanarman]

QMobile A300 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.61GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Load File : F:\CHINA\QMOBILE\A300 Q MOBILE OK  MTK6572_1403021306\MTK6572_1403021306.bin
 Image Size: 0x00000000A00005F8
 
 Programming Flash Image...
 Programming Flash Image Completed.
 
 Action completed
 Time taken : 00:09:56
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

A319 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA01
 CPU_ID: 6572
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: 90014A483447316404
 CHIP     : MT65720000
 CPU ID   :
 EMMC ID  : 90014A483447316404
 EMMC Size: 4GB,  usable capacity: 3.65GB
 EMMC Name: eMMC_Hynix_H9TP32A8JDACPR_KGM
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading mbr ......ok
 Downloading ebr1 ......ok
 Downloading uboot ......ok
 Downloading bootimg ......ok
 Downloading recovery ......ok
 Downloading sec_ro ......ok
 Downloading logo ......ok
 Downloading android ......ok
 Downloading cache ......ok
 Downloading usrdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:02:26
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[maanarman]

Oale X1 Write Flash Done

 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM47 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0000
 CPU_HW: CA00
 CPU_ID: 6580
 BV: 01
 SecConf: 00000000
 uploading boot image to RAM...
 Handshake received from Phone.
 Detected eMMC FlashType.
 uploading boot image to RAM...
 Handshake Received from Phone.
 eMMC cid: F40122426977696E20
 CHIP     : MT65800000
 CPU ID   :
 EMMC ID  : F40122426977696E20
 EMMC Size: 8GB,  usable capacity: 7.21GB
 EMMC Name: EMMC_Device_Biwin
 Read Hardware Information is done.
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading lk ......ok
 Downloading boot ......ok
 Downloading recovery ......ok
 Downloading logo ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ......ok
 Updating rom info ......ok
 All done.
 
 Action completed
 Time taken : 00:03:56
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.60

 

[Rahil123]

Voice v130 read flash and unlock done


READ FLASH


Code:
Action : Read Flash
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb....
Phone found [ USB Port:COM19 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_ID: 6260
CPU_SW: CB00
CPU_HW: 8000
uploading boot image to RAM...
Handshake Received from Phone.
uploading boot image to RAM...
Handshake Received from Phone.
uploading boot image to RAM...
Handshake Received from Phone.
CHIP : MT6260
CPU ID: 00000000
NOR ID : 00EF004000160000
NOR Size : 3MB
NOR Name : [WINBOND] W25Q32BV
NAND ID : 0000000000000000
NAND Size : 0MB
NAND Name: Nand:N/A
Boot Information completed.
Dummping Flash Image Now...
Dummping Flash Image Completed.

Flash Image size : 3.00MB
Saved to: C:\Documents and S

 

[Rahil123]

Voice v130 read flash and unlock done


READ FLASH


Code:
Action : Read Flash
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb....
Phone found [ USB Port:COM19 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_ID: 6260
CPU_SW: CB00
CPU_HW: 8000
uploading boot image to RAM...
Handshake Received from Phone.
uploading boot image to RAM...
Handshake Received from Phone.
uploading boot image to RAM...
Handshake Received from Phone.
CHIP : MT6260
CPU ID: 00000000
NOR ID : 00EF004000160000
NOR Size : 3MB
NOR Name : [WINBOND] W25Q32BV
NAND ID : 0000000000000000
NAND Size : 0MB
NAND Name: Nand:N/A
Boot Information completed.
Dummping Flash Image Now...
Dummping Flash Image Completed.

Flash Image size : 3.00MB
Saved to: C:\Documents and S

plze help i need voice v130 firmware