VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x606868FF
Manufacturing date: Apr 2018
CID: 90014A48 43473861 34A26068 68FF4570
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0xA2
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
eMMC 5.x Health report:
Device lifetime: Not Defined
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 30% - 40% device life time used
SK Hynix Health (Smart) report:
Factory bad blocks count in CE0: 0
Run-time bad blocks count in CE0: 0
Factory bad blocks count in CE1: 0
Run-time bad blocks count in CE1: 0
Factory bad blocks count in CE2: 0
Run-time bad blocks count in CE2: 0
Factory bad blocks count in CE3: 0
Run-time bad blocks count in CE3: 0
Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9090
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
----------------------------------------------------------------------------------------------------------------
this health report is good or bad? because SLC and MLC life is diffrent
phone stuck on logo and flashing not success with usb...
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x606868FF
Manufacturing date: Apr 2018
CID: 90014A48 43473861 34A26068 68FF4570
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0xA2
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
eMMC 5.x Health report:
Device lifetime: Not Defined
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 30% - 40% device life time used
SK Hynix Health (Smart) report:
Factory bad blocks count in CE0: 0
Run-time bad blocks count in CE0: 0
Factory bad blocks count in CE1: 0
Run-time bad blocks count in CE1: 0
Factory bad blocks count in CE2: 0
Run-time bad blocks count in CE2: 0
Factory bad blocks count in CE3: 0
Run-time bad blocks count in CE3: 0
Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9090
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
----------------------------------------------------------------------------------------------------------------
this health report is good or bad? because SLC and MLC life is diffrent
phone stuck on logo and flashing not success with usb...