Z3X Pandora PRO 8.7 Released. New Samsung added

[GsmToto]

Selected model: Infinix X6525B (Infinix Smart 8 Pro)
Operation: Erase FRP
Software version: 8.6


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE94656E1, 0x3EB606F2, 0x4B7D9B00, 0x6F53A3A4
Get Chip ID... [MT6765]
Get SOC ID... [206CFD17E3D84957B38AF23CA45439A5067F730FA8745D3329 6299583BA9D80B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD629034133413536341112BB44F02BA3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A564
EMMC_ID : 0xD629034133413536341112BB44F02BA3
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x3A3D800000 (232,96Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6525B
Product Name : X6525B-OP
Product Device : Infinix-X6525B
Product Board : Infinix-X6525B
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Mon Nov 18 15:11:15 CST 2024
Display ID : INFINIX-TGo-64-241115V1128
Security Patch : 2024-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 241118V1042
Userdata FS Type : F2FS
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

elected model: Mediatek Mediatek
Operation: Erase FRP And Wipe
Software version: 8.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x0DDEACEF, 0x274D08E6, 0xAA6FA2C0, 0x8050D3AD
Get Chip ID... [MT6761]
Get SOC ID... [4D4020A8F16CDF7FDAD52D1E3C07F15478CC3A527F68BA31BF 4E3CDB65435F52]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x11010030363447333000E15B14CFB3CF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 064G30
EMMC_ID : 0x11010030363447333000E15B14CFB3CF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Eudora
Product Manufacturer : incar
Product Model : E10 Pro
Product Name : EudoraE10Pro
Product Device : E10Pro
Product Board : Eudora
Board Platform : mt6761
Build ID : EudoraE10Pro
Build Date : Sun Jan 7 19:35:12 CST 2024
Display ID : Eudora_E10Pro_V1.0_202401071938
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231222.1258
Userdata FS Type : EXT4
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Itel A551L (Itel A27)
Operation: Erase FRP
Software version: 8.6


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9832E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 077124521A001047
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Itel
Product Manufacturer : ITEL MOBILE LIMITED
Product Model : itel A551L
Product Name : SU360O
Product Device : itel-A551L-Pro
Product Board : A551L
Board Platform : sp9832e
Build ID : RP1A.201005.001
Build Date : Mon Dec 18 15:32:26 CST 2023
Display ID : A551L-Pro-SU360O-11.0-OP-V042-20231218
Security Patch : 2023-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : OP-V042-20231218
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[kidounlock]

hello, I have two Tracfone TCL phones: the T607DL and T609DL. The T609 says it's unlocked, but it's still locked. The T607 locks again after unlocking. Any details? I still have the phones in my possession for any tests.

 

[GsmToto]

connet phone at preloader
phone OFF without any Key


Selected model: Honor WDY-LX2 (Honor X6a)
Operation: Erase FRP
Software version: 8.5

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x13788CDB, 0x1B716818, 0x3E3D8A56, 0xF500B57B
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G2M212
EMMC_ID : 0x13014E47324D323132102DF752705A61
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : HONOR
Product Manufacturer : alps
Product Model : k65v1_64_bsp
Product Name : vnd_k65v1_64_bsp
Product Device : HNWDY-M
Product Board : WDYL
Board Platform : mt6765
Build ID : SKQ1.210908.001
Build Date : Wed Oct 9 16:55:29 CST 2024
Display ID : System 8.0.0(32J0)
Security Patch : 2024-10-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : eng.root.20241009.160732
Userdata FS Type : F2FS
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[6218456]

Please login to view image

Pandora PRO cannot be opened after the update

 

[msjabar]

Try to disable Anti-virus and Windows security when you update..I experience also but now works fine...

 

[GsmToto]

Selected model: Tecno Mediatek
Operation: Erase FRP
Software version: 8.6


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x73328ECA, 0x7CF8CFEC, 0x8576DD16, 0x0CA53179
Get Chip ID... [MT6765]
Get SOC ID... [7DE4F858F59792C869D06ED4215E1826FA86967D4B6A56B80A ACF7E8BAC0B1B3]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010044503644414203ECD0D03237E3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x15010044503644414203ECD0D03237E3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KD7
Product Name : KD7-GL
Product Device : TECNO-KD7
Product Board : TECNO-KD7
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Fri Mar 11 02:15:24 CST 2022
Display ID : KD7-H6211FQRSTU-Q-GL-220311V417
Security Patch : 2022-03-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : FQRSTU-GL-220311V417
Userdata FS Type : F2FS
Read partition "frp"... OK
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 8.7

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM6
Port: USB\VID_1782&PID_4D00\5&2E40154&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ZY22K6RXHH
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : lionl
Product Name : lionl_g
Product Device : lionl
Product Board : lionl
Board Platform : ums9230
Build ID : ULBS34.66-76-1-1
Build Date : Wed Aug 7 19:13:36 CST 2024
Display ID : ULBS34.66-76-1-1 release-keys
Security Patch : 2024-08-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 2319dfa8
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[dondav77]

Add exynox device team it's long over due

 

[GsmToto]

Selected model: Tecno KC2 (Tecno Spark 4)
Operation: Erase FRP
Software version: 8.7


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x2267BE33, 0x5EC92749, 0x2FB0CB09, 0xF0EDE0F0
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GD6BMB
EMMC_ID : 0x150100474436424D4201572F903E27CF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 70% - 80% device life time used
DeviceLifeTimeEstB: 70% - 80% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KC2
Product Name : H6113
Product Device : TECNO-KC2
Product Board : TECNO-KC2
Board Platform : mt6761
Build ID : PPR1.180610.011
Build Date : Mon Jul 5 17:54:12 CST 2021
Display ID : KC2-H6113AI-P-210705V320
Security Patch : 2021-07-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : AI-210705V320
Userdata FS Type : F2FS
Read partition "frp"... OK/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-A236M (Galaxy A23 5G)
Operation: Erase FRP
Software version: 8.7
BIT 9 or less is supported by EDL loader


Waiting for device... OK
Device found at COM5
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1937106226
Sahara ver: 2
OEM PK HASH: BC2953F4D41AF68E6A57B7761A96C7D8A646BFF82A406DEC79 B7F8474B9FE45CAB4E7768DFF1B1AF89AE256F39B70E44
CPU: SM6375 (Snapdragon 695)
Vendor: Samsung
MSM HW ID: 001A90E100200000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: 57AAF48DABA11FA04CE8B971A0126F99817A071D
Loader PK hash: BC2953F4D41AF68E6A57B7761A96C7D8A646BFF82A406DEC79 B7F8474B9FE45CAB4E7768DFF1B1AF89AE256F39B70E44
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: MT128GAXAU2U228C0004
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x1DA8C00000 (118,64Gb)
LU1 size: 0x0000800000 (8,00Mb)
LU2 size: 0x0000800000 (8,00Mb)
LU3 size: 0x0000400000 (4,00Mb)
LU4 size: 0x0020000000 (512,00Mb)
LU5 size: 0x0000800000 (8,00Mb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [F2FS] ... OK
Serial Number : R5CW91QWBJD
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A236M
Product Name : a23xqub
Product Device : a23xq
Product Board : holi
Board Platform : holi
Build ID : RP1A.200720.012
Build Date : Fri Dec 13 23:42:41 KST 2024
Display ID : UP1A.231005.007.A236MUBU9EXL3
Security Patch : 2024-11-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : A236MUBU9EXL3
Userdata FS Type : F2FS
Erase FRP... OK
Done!

 

[msjabar]

Selected model: Samsung SM-A165F (Galaxy A16)
Operation: Erase FRP
Software version: 8.7
Work ID: 69000833

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x80EA6D44, 0x4EAC7392, 0x4A73B7A9, 0x0A9CE7D1
Get Chip ID... [MT1208]
Get SOC ID... [18E53183B27554CD59890009836BCCBDAE9339728D48F97195CACA170E13E274]
Get sec config... OK [000000E5]
Send AUTH file... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): KM5L9001DA-B424 ()
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
UFS INFO:
UFS_CID : KM5L9001DA-B424
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A165F
Product Name : a16nsxx
Product Device : a16
Build ID : SP1A.210812.016
Build Date : Tue Feb 11 20:20:07 KST 2025
Firmware Version : A165FXXS2AYB2
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A165F%20(Galaxy%20A16)/FRP_BACKUP_(2025-4-14_13-10-42)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[msjabar]

Selected model: Tecno BF6 (Tecno Pop 7)
Operation: Erase FRP
Software version: 8.7
Work ID: 69143225

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM15
Port: USB\VID_1782&PID_4D00\5&1973853&0&8
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 097121545E003350
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BF6
Product Name : BF6-OP
Product Device : TECNO-BF6
Product Board : BF6
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Thu Mar 14 19:01:52 CST 2024
Display ID : BF6-SE668SABCDE-SGo-OP-240314V787
Security Patch : 2024-03-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 240314V787
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!