Z3X Pandora PRO 7.8 / 7.9 New Released. New devices and new loaders added.

[GsmToto]

Selected model: OPPO CPH2385 (Oppo A77 4G)
Operation: Unlock network
Software version: 7.9


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x285112B7, 0x079DFB75, 0x75A32D65, 0x480E7037
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DUTB42
EMMC_ID : 0x15010044565FC0995755442343202B6A
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2385
Product Name : CPH2385
Product Device : OP5353L1
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Sep 26 23:41:10 CST 2024
Display ID : CPH2385_14.0.0.1300(EX01)
Security Patch : 2024-10-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : S.1a3c3e8_19be9
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2, GB1, GB2, SM]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: Realme RMX3834 (Realme Note 50)
Operation: Unlock network
Software version: 7.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to NONE... OK
Connect phone to [PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\&1A3A044C&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0R14958I24151145
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : ums9230_hulk_Natv
Product Name : RMX3854
Product Device : RE5CB0
Product Board : ums9230_hulk
Board Platform : ums9235
Build ID : TP1A.220624.014
Build Date : Tue Jul 23 15:12:03 CST 2024
Display ID : RMX3854export_13_A.59
Security Patch : 2024-07-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 2120
Userdata FS Type : F2FS
Check security state... OK [3]
Unlock bootloader... OK
Patch modem check... OK
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option.

 

[GsmToto]

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1209
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6835]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5E5606E2, 0xBEF0D567, 0xB211EBB2, 0x31B60D26
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Setup device enviroment... OK
Setup device parametres... OK
Get device info... OK
UFS CID (FW VER): MT128GAXAU2U88 ()
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [3]
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GAXAU2U77
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x1DCB000000 (119.17Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3785
Product Name : RMX3785IN
Product Device : RE5C6CL1
Product Board : mgvi_64_armv82
Board Platform : common
Build ID : TP1A.220905.078
Build Date : Mon Feb 19 23:37:51 CST 2024
Display ID : RMX3785_13.2.0.510(EX01)
Security Patch : 2024-02-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : T.R4T2.1681239_1_330
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 352370974353525
IMEI 2: 356780864267896
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching CERT... OK
Save patched partiton... OK
Updating NVRAM... OK
Read security partition from phone... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option