Z3X Pandora PRO 5.11-5.12 new Hot Update

Z3X Team

SPYROS

Product Supporter
Jan 27, 2023
237
716
PK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM25
Port: USB\VID_1782&PID_4D00\7&2CD7B29F&1&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: P29073117100
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia C21 Plus
Product Device : HPE
Product Board : Hope
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Mon Sep 4 10:58:26 UTC 2023
Display ID : 00WW_1_270_SP02
Security Patch : 2023-09-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 36135
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check... OK
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!
If your phone after this operation keeps rebooting - use wipe data option.

Selected model: Nokia TA-1424 (Nokia C21 Plus)
Operation: Unlock network
Software version: 5.13
 

SPYROS

Product Supporter
Jan 27, 2023
237
716
PK
Selected model: Samsung SM-A035F (Samsung Galaxy A03 )
Operation: Erase FRP
Software version: 5.13

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM12
Port: USB\VID_1782&PID_4D00\7&A1CAB7F&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T606_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 82A27C6V077
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A035F
Product Name : a03nnxx
Product Device : a03
Product Board : ums9230_25c10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Sep 8 17:24:56 KST 2023
Display ID : TP1A.220624.014.A035FXXU4CWI1
Security Patch : 2023-08-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A035FXXU4CWI1
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "persistent" partition... OK
Formatting "userdata" partition... OK
Done!
 
  • Like
Reactions: mobilesanto

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Pandora PRO 5.12/5.13 Update. Some fix and new phones added

New devices added to list of supported:

- Added support AT&T Calypso 2 (U319AA)*

- Added support TMB Revvl 6 (TMAF025G)

- Some critical bugs fixed
 

nakash

Active Member
Jan 29, 2021
25
20
india
Selected model: Spreadtrum Spreadtrum
Operation: Unlock network
Software version: 5.13

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM11
Port: USB\VID_1782&PID_4D00\7&DC8AD04&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 747336305189
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : P652
Product Name : Z6356O_1
Product Device : P963F61
Product Board : s9863a1h10_go_32b
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Sat Aug 26 16:03:02 CST 2023
Display ID : P652_M05
Security Patch : 2023-08-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20230826.151848
Userdata FS Type : F2FS
Check security state... OK [1]
Unlock bootloader... OK
Patch modem check... OK
Patch data... OK
Load NVD... OK
Unlock... OK
Save NVD... OK
Done!
 

cxara

Active Member
Nov 27, 2022
31
16
india
Selected model: Tecno BD2 (Tecno Pop 5)
Operation: Erase FRP
Software version: 5.13
Work ID: 10521430

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM10
Port: USB\VID_1782&PID_4D00\6&3378F16B&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 065431517F004864
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO BD2p
Product Name : BD2p-OP
Product Device : TECNO-BD2p
Product Board : BD2p
Board Platform : sp7731e
Build ID : RP1A.201005.001
Build Date : Thu Jun 8 15:35:56 CST 2023
Display ID : BD2p-SP613DEF-RGo-OP-230608V19
Security Patch : 2023-05-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230608V19
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 

SPYROS

Product Supporter
Jan 27, 2023
237
716
PK
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM10
Port: USB\VID_1782&PID_4D00\7&6D84D51&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T612_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ...................0HA0MFY
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3506
Product Name : RMX3506
Product Device : RE588E
Product Board : RMX3506
Board Platform : ums9230
Build ID : RP1A.201005.001
Build Date : Wed Jan 11 19:23:59 CST 2023
Display ID : RMX3506_11.A.62
Security Patch : 2022-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1673436290000
Userdata FS Type : F2FS
Reading lock data... [0,0] ... OK
Unlocking ... OK
Done!
 

SPYROS

Product Supporter
Jan 27, 2023
237
716
PK
Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 5.13

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x804EA2BF, 0x9FEEB546, 0x26AC2782, 0x372D9
Get Chip ID... [MT6761]
Get SOC ID... [8B27AD6E354F413004241B73676D2E284EF2482FCE11EC9ED
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xEC29004154325931422004087E164A3F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: AT2Y1B
EMMC_ID : 0xEC29004154325931422004087E164A3F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0739800000 (28.90Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex
Product Model : Z23
Product Name : Vortex_Z23
Product Device : Z23
Product Board : g2239fmr_v1_gi_g5a_a_ym_t
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Thu Aug 10 19:26:40 CST 2023
Display ID : Vortex_Z23_V1.0_20230810
Security Patch : 2023-07-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 2023324
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Unlock... OK [DF1, GB2, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

faraday

Friend's Martview
Sep 24, 2020
152
19
İSTANBUL
pandora kutusu z3x box kullanıcılarına haksızlık olacak şekilde bazı z3x box iyileştirmeden böyle bir araç veya kutuyu piyasaya sürmeniz doğru değil. Şahsen z3x box kullanıcısıyım. Neden z3x kutusunu etkinleştiriyorsunuz? Dışarıdan satın almayı başarmak. Bu ayıbını temizleyin. Z3x kutusunu kullandığıma pişman oldum.
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
 

nakash

Active Member
Jan 29, 2021
25
20
india
Selected model: Mediatek Mediatek
Operation: Read PTT
Software version: 5.13

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM33 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x374E6B07, 0x119A147B, 0xF59FA9D5, 0xFB4BBB3B
Get Chip ID... [MT6761]
Get SOC ID... [57369BE2DAC4651EE9DF3B6E21DA032D183E4786CE9754645A 9762C9A26EB43D]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A484147346132A513003232B575
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HAG4a2
EMMC_ID : 0x90014A484147346132A513003232B575
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03AB400000 (14.68Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Cloud_Mobile
Product Manufacturer : Along
Product Model : Stratus_C7
Product Name : Stratus_C7
Product Device : Stratus_C7
Product Board : w18
Board Platform : mt6761
Build ID : SP1A.230816.1526
Build Date : Wed Aug 16 18:06:18 CST 2023
Display ID : W18_Stratus_C7_V5.0_20230816_1428
Security Patch : 2023-08-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : mp1V0816
Userdata FS Type : F2FS
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "md_udc"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "persist"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "logo"... OK
Read partition "md1img_a"... OK
Read partition "spmfw_a"... OK
Read partition "scp_a"... OK
Read partition "sspm_a"... OK
Read partition "gz_a"... OK
Read partition "lk_a"... OK
Read partition "boot_a"... OK
Read partition "vendor_boot_a"... OK
Read partition "dtbo_a"... OK
Read partition "tee_a"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_vendor_a"... OK
Read partition "md1img_b"... OK
Read partition "spmfw_b"... OK
Read partition "scp_b"... OK
Read partition "sspm_b"... OK
Read partition "gz_b"... OK
Read partition "lk_b"... OK
Read partition "boot_b"... OK
Read partition "vendor_boot_b"... OK
Read partition "dtbo_b"... OK
Read partition "tee_b"... OK
Read partition "super"... OK
Read partition "vbmeta_b"... OK
Read partition "vbmeta_system_b"... OK
Read partition "vbmeta_vendor_b"... OK
Read partition "otp"... OK
Read partition "flashinfo"... OK
Read partition "sgpt"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6761/Mediatek_Mediatek_DUMP_(2023-11-4_10-5-6)/
Dumping Partitions done!
 

nakash

Active Member
Jan 29, 2021
25
20
india
Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP
Software version: 5.13
Work ID: 11941142

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM11
Port: USB\VID_1782&PID_4D00\5&2FF29CF4&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC7731E
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: A011200000002075
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : RKU
Product Model Display: TA-1165
Product Name : Rocket_00WW
Product Device : RKU
Build ID : PPR1.180610.011
Build Date : Fri Apr 17 15:13:18 CST 2020
Display ID : 00WW_1_090
Security Patch : 2020-05-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 00WW_1_090
Backup partitions... OK
Formatting "persist" partition... OK
Done!
 
  • Like
Reactions: contasion

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vivo PD1901EF (Vivo Y12)
Operation: Unlock network
Software version: 5.13

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM22 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x7E1B1E6C, 0xCF10CADB, 0x642ED4BE, 0xC5F786A9
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x90014A68433861503E036611B6246691
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E036611B6246691
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1901
Product Name : 1901
Product Device : 1901
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : RP1A.200720.012
Build Date : Tue Jun 7 20:01:34 CST 2022
Display ID : RP1A.200720.012 release-keys
Security Patch : 2022-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20220607.200319
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Wiko U316AT (Life 3)
Operation: Unlock network
Software version: 4.7
Work ID: 973245

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x403ED589, 0x946BDA4C, 0x5DD89095, 0x2FE19FE3
Get Chip ID... [MT6739]
Get SOC ID... [0DC213856463C98CDCDB5611BE81BFD2F4F51D99361C95D38F BA2127131A21CE]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010051453633424209F4A168A29863
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QE63BB
EMMC_ID : 0x15010051453633424209F4A168A29863
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : WIKO
Product Manufacturer : TINNO
Product Model : Wiko U316AT
Product Name : U316AT
Product Device : U316AT
Product Board : U316AT
Board Platform : -1
Build ID : RP1A.200720.011
Build Date : Thu Dec 8 20:05:00 CST 2022
Display ID : RP1A.200720.011 release-keys
Security Patch : 2022-12-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1670501100
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Read OTP... error(10)
Read OTP... error(1)
Unlock... OK [DF1, DF2, GB1, GB2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,871
21,545
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Spreadtrum Spreadtrum
Operation: Wipe Data
Software version: 5.13
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES
Work ID: 2934352

Waiting for device... OK
Device found at COM11
Port: USB\VID_1782&PID_4D00\5&31036E8E&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Connecting to device... OK
Selected processor: SC7731E
Load files... OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: A170300000005058
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia C1
Product Model Display: TA-1165
Product Name : Rocket_00WW
Product Device : RKU
Build ID : PPR1.180610.011
Build Date : Fri Apr 15 11:49:36 CST 2022
Display ID : 00WW_1_150_SP01
Security Patch : 2022-02-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 00WW_1_15A
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... not found, skip
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: EXT4] ... OK
 
Top