Z3X Pandora 7.12/ 7.13 Release 23/02/2025

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Read Partitions
Software version: 7.12



Product Brand : benco
Product Manufacturer : INONE
Product Model : AEOP519
Product Name : AEOP519
Product Device : AEOP519
Product Board : op503_ums9230_1h10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Fri Jul 5 20:41:57 CST 2024
Display ID : benco_AEOP519_S152_24G05
Security Patch : 2024-06-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 50
Userdata FS Type : F2FS

 

[GsmToto]

Selected model: Xiaomi Poco C31 (Angelicain)
Operation: Repair
Software version: 7.12

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x042C3A1D, 0x08A77314, 0x183A7D06, 0x4B7BB917
Get Chip ID... [MT6765]
Get SOC ID... [7AE5D692FE452B853C63FD216310645BB490FE5DF5253DB47609185719B3950D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x9B01006029749C759325030363400F1D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y2P064
EMMC_ID : 0x9B010056029749C79325030363400F1D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : POCO
Product Manufacturer : Xiaomi
Product Model : 211033MI
Product Name : angelicain_in
Product Device : angelicain
Product Board : angelicain
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Sun Sep 12 11:13:43 CST 2021
Display ID : QP1A.190711.020
Security Patch : 2021-09-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : V12.0.1.0.QCRINRF
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Load partiton for patching... OK
Checking boot patch possiblity... POSSIBLE WITH BOOT UNLOCK
Patching CERT... OK
Save patched partiton... OK
Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.

 

[aliipi]

Selected model: Infinix X6526 (Infinix Smart 8 Plus)
Operation: Erase FRP
Software version: 7.12
Work ID: 58422210

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM26 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xDCA79FF5, 0x73151C50, 0x7455C2F5, 0x1ACD4BBC
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: Xiaomi Redmi A1+ (Ice)
Operation: Erase FRP
Software version: 7.12


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x58DE85F8, 0xCE904A0B, 0xFAEC1071, 0xD81308B4
Get Chip ID... [MT6765]
Get SOC ID... [496E486C5FCE17BH565D1827CCA07C8D14D0CA98D43HBDB56 867B42F055103W]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D0T4D4D433634W7510C1464F3B99W
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC64G
EMMC_ID : 0xD62D004D4D433VR447510C1D64F3B99W
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : water
Product Name : water_global
Product Device : water
Product Board : water
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Mon Aug 14 22:05:34 CST 2023
Display ID : 13 V14.0.15.0.TGOMIXB
Security Patch : 2023-08-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.15.0.TGOMIXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A1%2B%20(Ice)/FRP_BACKUP_(2025-1-22_20-17-57)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Wipe Data
Software version: 7.12


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x420C483B, 0x03AC0807, 0x0814898B, 0xBC4365FA
Get Chip ID... [MT6833]
Get SOC ID... [7022FCEA02F8AK5AFDD812732FFF96B62S23AEC1F8716DB648 D78BA275E6C0F5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD6010S41334135363R126FA3E62D59EM
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A561
EMMC_ID : 0xD6010341K34135363D126FA3E62D59EM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 7540N
Product Name : P633F08_2
Product Device : P633F08
Product Board : Crabapple
Board Platform : mt6833
Build ID : RP1A.200720.011
Build Date : Wed Jun 19 16:56:04 CST 2024
Display ID : MyOS11.1.3_7540N_PJ_VDC_ZA
Security Patch : 2024-06-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20240619.162606
Userdata FS Type : F2FS
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

 

[aliipi]

Selected model: Realme RMX3890 (Realme C67 4G)
Operation: Factory Reset
Software version: 7.13
Work ID: 58702811

Waiting for device... OK
Device found at COM52
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 698691351
Sahara ver: 2
OEM PK HASH: D53F19D28ED8CA4A5D9C5BD7DDB365DBC9268CBDE3DFC8A151E70C8B0A0DFFC210BBF251AE8BDED0F5714DE3FC1D0AA5
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Oppo/Oneplus
MSM HW ID: 001B80E100510000
SBL SW Ver: 00000000
Prepare loader file... error
Necessary loader not found(2)