Z3X Pandora 6.4 & 6.5 Exlusive Update Released.

Z3X Team

Khan Anwar

Active Member
Jun 23, 2020
15
7
Dhaka


-
Pandora PRO 6.4. Exclusive solution and new devices added.


Exclusive solution - Patch/Repair CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)


Added support MTK phones:

- CPH2357 Oppo Reno8 Pro 5G
- CPH2437 Oppo Find N2 Flip
- CPH2481 Oppo Reno8 T
- CPH2607 Oppo Reno11 Pro 5G
- OPD2201 Oppo Pad 2
- OPD2202 Oppo Pad 2
- OPD2301 Oppo Pad Air 2
- OPD2302 Oppo Pad Neo
- OPD2303 Oppo Pad Neo
- PHV110 Oppo Reno10 Pro 5G
- PJH110 Oppo Reno11 5G

- Blackview BL8000, Blackview BL8800, Blackview BL8800 Pro, Blackview BL9000, Blackview BV4800
- Blackview BV5200, Blackview BV5200 Pro, Blackview BV5300, Blackview BV5300 Plus, Blackview BV5300 Pro,
- Blackview BV6200, Blackview BV6200 Pro, Blackview BV7100, Blackview BV7200, Blackview BV8900,
- Blackview BV8900 Pro, Blackview BV9200, Blackview Oscal C30, Blackview Oscal C30 Pro,
- Blackview Oscal S60 Pro Night Vision, Blackview Oscal S70, Blackview Oscal S70 Pro, Blackview Oscal S80,
- Blackview Tab 13, Blackview Tab 13 Pro, Blackview Tab 11 WiFi, Blackview A96, Blackview A200 Pro,
- Blackview Active 8 Pro, Blackview BV9300, Blackview BV9300 Pro, Blackview N6000, Blackview Oscal Tiger 12,
- Blackview Shark 8, Blackview Tab 18*
- Realme Pad 2 RMP2204/RMP2205

- Oukitel C21 Plus, Oukitel C31, Oukitel C31 Pro, Oukitel C90 Pro, Oukitel F150 H2022, Oukitel RT2,
- Oukitel RT3, Oukitel WP18 Pro, Oukitel WP20 Pro, Oukitel WP22, Oukitel WP30 Pro

- Kyocera: A001KC Katan Sumaho 2, A201KC Katan Sumaho 2 Plus, KC-T304, KC-T304C,
- KY-42C Digno Keitai R, KY-43C Digno Mobile Cameraless, KYT34 Digno Tab WiMAX 2 Plus,
- KYV47 Basio 4, KYV48 Gratina, S6-KC S6, S8-KC S8

- OnePlus CPH2389 Nord N300, CPH2399, CPH2401 Nord 2T, CPH2469 Nord N20 SE

- UmidigiA13 Pro 5G, Umidigi A13 Pro Max 5G

- Sparx Neo X

- Xiaomi Redmi 13C/Poco C65 (Thanks for iProServis(Hojiakbar))



Added support for new Unisoc devices:

- Blackview A52 Pro, Blackview A53, Blackview A53 Pro, Blackview Active 6, Blackview Active 8,
- Blackview Oscal C70, Blackview Oscal Flat 1C, Blackview Oscal Modern 8, Blackview Oscal Pad 13,
- Blackview Oscal Pad 15, Blackview Oscal Pad 16, Blackview Oscal Pad 18, Blackview Oscal Spider 8,
- Blackview Oscal Tiger 10, Blackview Tab 3 Kids, Blackview Tab 7 Pro, Blackview Tab 12 Pro, Blackview Wave 6C,
- Blackview Tab 15 Pro, Blackview Tab 16, Blackview Tab 60, Blackview Tab 60 Kids, Blackview Tab 80

- Nokia C22 (TA-1533, TA-1536, TA-1539, TA-1541)*

- Umidigi A13 Tab, Umidigi A15, Umidigi A15C, Umidigi A15 Tab, Umidigi Active T1, Umidigi G3 Max,
- Umidigi G3 Plus, Umidigi G5, Umidigi G5 Mecha, Umidigi G5 Tab, Umidigi G5 Tab Kids

- Oukitel C32, Oukitel C36

- Sparx Neo 5 Plus, Sparx Neo 7 Ultra, Sparx Neo 7 Plus, Sparx S3, Sparx S9*

- RMX3830 Realme C51, RMX3834 Realme Note 50, RMP2105 Realme Pad Mini, RMP2106 Realme Pad Mini


List of supported functions for listed Unisoc phones (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Switch Slot, Repair, Wipe Data/Partitions, Fix Dm-Verity)




Added repair/patch CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)

IMPORTANT:
When you will use this function software will detect details of FW and will give you know: supported FW or not)



GUI changes:

- Added: Turkish and Arabic languages

- Added: New button icons

- Added: Activation/Renewal by "1 year activation code"


Improved and added: support new security Repair and Patch CERT for Oppo/Realme/OnePlus


180.21 MB file on MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE


Vivo Tecno Infinix


-
Pandora PRO 6.4. Exclusive solution and new devices added.


Exclusive solution - Patch/Repair CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)


Added support MTK phones:

- CPH2357 Oppo Reno8 Pro 5G
- CPH2437 Oppo Find N2 Flip
- CPH2481 Oppo Reno8 T
- CPH2607 Oppo Reno11 Pro 5G
- OPD2201 Oppo Pad 2
- OPD2202 Oppo Pad 2
- OPD2301 Oppo Pad Air 2
- OPD2302 Oppo Pad Neo
- OPD2303 Oppo Pad Neo
- PHV110 Oppo Reno10 Pro 5G
- PJH110 Oppo Reno11 5G

- Blackview BL8000, Blackview BL8800, Blackview BL8800 Pro, Blackview BL9000, Blackview BV4800
- Blackview BV5200, Blackview BV5200 Pro, Blackview BV5300, Blackview BV5300 Plus, Blackview BV5300 Pro,
- Blackview BV6200, Blackview BV6200 Pro, Blackview BV7100, Blackview BV7200, Blackview BV8900,
- Blackview BV8900 Pro, Blackview BV9200, Blackview Oscal C30, Blackview Oscal C30 Pro,
- Blackview Oscal S60 Pro Night Vision, Blackview Oscal S70, Blackview Oscal S70 Pro, Blackview Oscal S80,
- Blackview Tab 13, Blackview Tab 13 Pro, Blackview Tab 11 WiFi, Blackview A96, Blackview A200 Pro,
- Blackview Active 8 Pro, Blackview BV9300, Blackview BV9300 Pro, Blackview N6000, Blackview Oscal Tiger 12,
- Blackview Shark 8, Blackview Tab 18*
- Realme Pad 2 RMP2204/RMP2205

- Oukitel C21 Plus, Oukitel C31, Oukitel C31 Pro, Oukitel C90 Pro, Oukitel F150 H2022, Oukitel RT2,
- Oukitel RT3, Oukitel WP18 Pro, Oukitel WP20 Pro, Oukitel WP22, Oukitel WP30 Pro

- Kyocera: A001KC Katan Sumaho 2, A201KC Katan Sumaho 2 Plus, KC-T304, KC-T304C,
- KY-42C Digno Keitai R, KY-43C Digno Mobile Cameraless, KYT34 Digno Tab WiMAX 2 Plus,
- KYV47 Basio 4, KYV48 Gratina, S6-KC S6, S8-KC S8

- OnePlus CPH2389 Nord N300, CPH2399, CPH2401 Nord 2T, CPH2469 Nord N20 SE

- UmidigiA13 Pro 5G, Umidigi A13 Pro Max 5G

- Sparx Neo X

- Xiaomi Redmi 13C/Poco C65 (Thanks for iProServis(Hojiakbar))



Added support for new Unisoc devices:

- Blackview A52 Pro, Blackview A53, Blackview A53 Pro, Blackview Active 6, Blackview Active 8,
- Blackview Oscal C70, Blackview Oscal Flat 1C, Blackview Oscal Modern 8, Blackview Oscal Pad 13,
- Blackview Oscal Pad 15, Blackview Oscal Pad 16, Blackview Oscal Pad 18, Blackview Oscal Spider 8,
- Blackview Oscal Tiger 10, Blackview Tab 3 Kids, Blackview Tab 7 Pro, Blackview Tab 12 Pro, Blackview Wave 6C,
- Blackview Tab 15 Pro, Blackview Tab 16, Blackview Tab 60, Blackview Tab 60 Kids, Blackview Tab 80

- Nokia C22 (TA-1533, TA-1536, TA-1539, TA-1541)*

- Umidigi A13 Tab, Umidigi A15, Umidigi A15C, Umidigi A15 Tab, Umidigi Active T1, Umidigi G3 Max,
- Umidigi G3 Plus, Umidigi G5, Umidigi G5 Mecha, Umidigi G5 Tab, Umidigi G5 Tab Kids

- Oukitel C32, Oukitel C36

- Sparx Neo 5 Plus, Sparx Neo 7 Ultra, Sparx Neo 7 Plus, Sparx S3, Sparx S9*

- RMX3830 Realme C51, RMX3834 Realme Note 50, RMP2105 Realme Pad Mini, RMP2106 Realme Pad Mini


List of supported functions for listed Unisoc phones (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Switch Slot, Repair, Wipe Data/Partitions, Fix Dm-Verity)




Added repair/patch CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)

IMPORTANT:
When you will use this function software will detect details of FW and will give you know: supported FW or not)



GUI changes:

- Added: Turkish and Arabic languages

- Added: New button icons

- Added: Activation/Renewal by "1 year activation code"


Improved and added: support new security Repair and Patch CERT for Oppo/Realme/OnePlus


180.21 MB file on MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE


Vivo Tecno Infinix Update Need
 

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Samsung SM-A042F (Samsung Galaxy A04e)
Operation: Erase FRP
Software version: 6.5

Searching USB Flash interface... COM3detected
Setup connection... OK
Model: SM-A042F
SW version: A042FXXU1AVJ7
Sales code: XNZ
Device ID: 1c66a4b3fca8
Vendor: SAMSUNG
Product: 4X62MB
Unique Number: H153458300D6E2E436B2
FW Version: 4
Capacity: 32 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM6 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!
 

Mdwaseem

Member
Feb 24, 2021
7
1
Kolkata


-
Pandora PRO 6.4. Exclusive solution and new devices added.


Exclusive solution - Patch/Repair CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)


Added support MTK phones:

- CPH2357 Oppo Reno8 Pro 5G
- CPH2437 Oppo Find N2 Flip
- CPH2481 Oppo Reno8 T
- CPH2607 Oppo Reno11 Pro 5G
- OPD2201 Oppo Pad 2
- OPD2202 Oppo Pad 2
- OPD2301 Oppo Pad Air 2
- OPD2302 Oppo Pad Neo
- OPD2303 Oppo Pad Neo
- PHV110 Oppo Reno10 Pro 5G
- PJH110 Oppo Reno11 5G

- Blackview BL8000, Blackview BL8800, Blackview BL8800 Pro, Blackview BL9000, Blackview BV4800
- Blackview BV5200, Blackview BV5200 Pro, Blackview BV5300, Blackview BV5300 Plus, Blackview BV5300 Pro,
- Blackview BV6200, Blackview BV6200 Pro, Blackview BV7100, Blackview BV7200, Blackview BV8900,
- Blackview BV8900 Pro, Blackview BV9200, Blackview Oscal C30, Blackview Oscal C30 Pro,
- Blackview Oscal S60 Pro Night Vision, Blackview Oscal S70, Blackview Oscal S70 Pro, Blackview Oscal S80,
- Blackview Tab 13, Blackview Tab 13 Pro, Blackview Tab 11 WiFi, Blackview A96, Blackview A200 Pro,
- Blackview Active 8 Pro, Blackview BV9300, Blackview BV9300 Pro, Blackview N6000, Blackview Oscal Tiger 12,
- Blackview Shark 8, Blackview Tab 18*
- Realme Pad 2 RMP2204/RMP2205

- Oukitel C21 Plus, Oukitel C31, Oukitel C31 Pro, Oukitel C90 Pro, Oukitel F150 H2022, Oukitel RT2,
- Oukitel RT3, Oukitel WP18 Pro, Oukitel WP20 Pro, Oukitel WP22, Oukitel WP30 Pro

- Kyocera: A001KC Katan Sumaho 2, A201KC Katan Sumaho 2 Plus, KC-T304, KC-T304C,
- KY-42C Digno Keitai R, KY-43C Digno Mobile Cameraless, KYT34 Digno Tab WiMAX 2 Plus,
- KYV47 Basio 4, KYV48 Gratina, S6-KC S6, S8-KC S8

- OnePlus CPH2389 Nord N300, CPH2399, CPH2401 Nord 2T, CPH2469 Nord N20 SE

- UmidigiA13 Pro 5G, Umidigi A13 Pro Max 5G

- Sparx Neo X

- Xiaomi Redmi 13C/Poco C65 (Thanks for iProServis(Hojiakbar))



Added support for new Unisoc devices:

- Blackview A52 Pro, Blackview A53, Blackview A53 Pro, Blackview Active 6, Blackview Active 8,
- Blackview Oscal C70, Blackview Oscal Flat 1C, Blackview Oscal Modern 8, Blackview Oscal Pad 13,
- Blackview Oscal Pad 15, Blackview Oscal Pad 16, Blackview Oscal Pad 18, Blackview Oscal Spider 8,
- Blackview Oscal Tiger 10, Blackview Tab 3 Kids, Blackview Tab 7 Pro, Blackview Tab 12 Pro, Blackview Wave 6C,
- Blackview Tab 15 Pro, Blackview Tab 16, Blackview Tab 60, Blackview Tab 60 Kids, Blackview Tab 80

- Nokia C22 (TA-1533, TA-1536, TA-1539, TA-1541)*

- Umidigi A13 Tab, Umidigi A15, Umidigi A15C, Umidigi A15 Tab, Umidigi Active T1, Umidigi G3 Max,
- Umidigi G3 Plus, Umidigi G5, Umidigi G5 Mecha, Umidigi G5 Tab, Umidigi G5 Tab Kids

- Oukitel C32, Oukitel C36

- Sparx Neo 5 Plus, Sparx Neo 7 Ultra, Sparx Neo 7 Plus, Sparx S3, Sparx S9*

- RMX3830 Realme C51, RMX3834 Realme Note 50, RMP2105 Realme Pad Mini, RMP2106 Realme Pad Mini


List of supported functions for listed Unisoc phones (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Switch Slot, Repair, Wipe Data/Partitions, Fix Dm-Verity)




Added repair/patch CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)

IMPORTANT:
When you will use this function software will detect details of FW and will give you know: supported FW or not)



GUI changes:

- Added: Turkish and Arabic languages

- Added: New button icons

- Added: Activation/Renewal by "1 year activation code"


Improved and added: support new security Repair and Patch CERT for Oppo/Realme/OnePlus


180.21 MB file on MEGA

Pandora_setup_6.5 .exe



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE


Selected model: OPPO CPH1909 (OPPO A5s)
Operation: Repair
Software version: 6.5
Work ID: 21518254

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7A1B46DA, 0xE5EF21C7, 0x5DB4B8A1, 0xE5C2EF3F
Get Chip ID... [MT6771]
Get SOC ID... [208B129D6828A335EA342B1EEF72D1F3B506B9637AB018CFACB1C05D1E8B30D4]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [9]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A484347386134A5DE3299FE2659
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HCG8a4
EMMC_ID : 0x90014A484347386134A5DE3299FE2659
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Model : oppo6771
Product Board : RM6771_18601
Board Platform : mt6771
Build ID : QP1A.190711.020
Build Date : Tue Jul 27 11:44:15 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-07-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 911000000000000
IMEI 2: 911000000000000
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching CERT... already patched, skip
Updating NVRAM... OK
Read security partition from phone... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Selected "Disable VBMETA verification"
Read security partition from phone... error(STATUS_INVALID_PARAMETERS)
 
  • Like
Reactions: GsmToto

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Infinix X659B (Infinix Hot 10i)
Operation: Eliminar FRP
Software version: 6.5

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x1A127B5A, 0x18311931, 0xBD164689, 0x217A12BD
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x13014E47314A395339100F940BF528AA
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1J9S9
EMMC_ID : 0x13014E47314A395339100F940BF528AA
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1F000000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X659B
Product Name : X659B-OP
Product Device : Infinix-X659B
Product Board : Infinix-X659B
Board Platform : mt6768
Build ID : RP1A.200720.011
Build Date : Tue Feb 14 10:34:05 CST 2023
Display ID : INFINIX-R-64-230213V172
Security Patch : 2023-02-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 230213V227
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X659B%20(Infinix%20Hot%2010i)/FRP_BACKUP_(2024-3-7_05-33-54)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno LD7 (Tecno Pova)
Operation: Eliminar FRP
Software version: 6.5

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x4A816AB6, 0x5078C831, 0xB1971B91, 0x8ED56185
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x15010033563643414202CBBFD037283Z
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CAB
EMMC_ID : 0x15010033563643414202CBBFD037283Z
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1EC00000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO LD7
Product Name : LD7-OP
Product Device : TECNO-LD7
Product Board : TECNO-LD7
Board Platform : mt6768
Build ID : QP1A.190711.020
Build Date : Wed Aug 24 18:21:58 CST 2022
Display ID : TECNO-Q-64-220824V456
Security Patch : 2022-08-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 220824V456
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LD7%20(Tecno%20Pova)/FRP_BACKUP_(2024-3-7_06-23-11)/
Writting FRP data... OK
Erase FRP done!
 

tahir0056951

Member
Aug 2, 2022
12
2
burewala
oppo any latest model unknown model error
y17s 1 january 2024 security not boot.
tecno new security 2024 vnot boot.
plz release big update.new preloder patch.
 

Mdwaseem

Member
Feb 24, 2021
7
1
Kolkata
Security Patch : 2021-05-05

Version SDK : 29

Version Release : 10

Version Codename : REL

Read security partition from phone...

Decrypting security data... OK

Encrypt security data... OK

Read partition "nvdata"... OK

Read partition "protect1"... OK

Read partition "nvram"... OK

Read NVDATA files... OK

Read NVRAM files... OK

Read security files... OK

Calculating... OK

Repairing IMEI...

IMEI 1: 911000000000000

IMEI 2: 911000000000000

Write IMEI and patch CERT [NVDATA]... OK

Checking patch type... [1]

Patching CERT... already patched, skip

Updating NVRAM... OK

Read security partition from phone... OK

Write security partition to phone... OK

Checking additional lock... [DISABLED]

Selected "Disable VBMETA verification"

Read security partition from phone... error(STATUS_INVALID_PARAMETERS)
 

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
vodacom kicka 6 4g TLC T431Qfrp and password removed sucefully
Selected model: TCL T767W (TCL 30XE 5G)
Operation: Erase FRP
Software version: 6.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM7 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE0D13845, 0x5B236AC3, 0x6DD38423, 0x3AD2B61Z
Get Chip ID... [MT6761]
Get SOC ID... [E92F07EBE95B756E350100E0A3542D8340E485E1A2C9032B6D 11135EEACA8DA8]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241524A313158103BB484C4B9A2
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARJ11X
EMMC_ID : 0xF4012241524A313158103BB484C4B9A2
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0748000000 (29.13Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T431Q
Product Name : T431Q
Product Device : Rio
Product Board : MT6761
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Thu Jul 13 19:32:24 CST 2023
Display ID : SP1A.210812.016 release-keys
Security Patch : 2023-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : KW9C
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_T767W%20(TCL%2030XE%205G)/FRP_BACKUP_(2024-3-7_20-44-41)/
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
v6.5 done patching

Selected model: OPPO CPH2273 (OPPO A54s)
Operation: Repair
Software version: 6.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE4518633, 0xBA1C658E, 0xA321BBC9, 0xAC77849E
Get Chip ID... [MT6765]
Get SOC ID... [7B01727DB80640884447D13D07B485692BD9FDEC0CE448918D 36D192C82ED52B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47314A395339101AD40D2319A3
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1J9S9
EMMC_ID : 0x13014E47314A395339101AD40D2319A3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : CPH2273
Product Name : vnd_oppo6765
Product Device : oppo6765
Product Board : oppo6765
Board Platform : mt6765
Build ID : RP1A.200720.011
Build Date : Wed Nov 24 02:12:03 CST 2021
Display ID : CPH2273_11_A.01
Security Patch : 2021-11-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1637690366587
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI: 860314050//;;;;
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching CERT... OK
Save patched partiton... OK
Updating NVRAM... OK
Read security partition from phone... OK
Write security partition to phone... OK
Checking additional lock... [ENABLED]
Disable additional lock... OK
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.
 
  • Like
Reactions: SPYROS

alexboxcell

Junior Member
Sep 11, 2019
3
1
Selected model: Xiaomi Redmi A2 (Water)
Operation: Repair
Software version: 6.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM17 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM17 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x6636D4BF, 0x5531CB9C, 0xCEEBE194, 0x80B986C8
Get Chip ID... [MT6765]
Get SOC ID... [A96B7FCC1D3D9528A3F86026BDE6EF8007D739F864420BDB4E2431E0C1FDF09E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D004D4D43363447512876D2649A45
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC64G
EMMC_ID : 0xD62D004D4D43363447512876D2649A45
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : water
Product Name : water_global
Product Device : water
Product Board : water
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Mon Aug 14 22:05:34 CST 2023
Display ID : 13 V14.0.15.0.TGOMIXM
Security Patch : 2023-08-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.15.0.TGOMIXM
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 8676440
IMEI 2: 8676440
Repairing IMEI...
IMEI 1: 8676440
IMEI 2: 8676440
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... OK
Checking boot unlock status... error(2)
op_result:[Address failure

unlock bootloader fail



Selected model: Xiaomi Redmi A2 (Water)
Operation: Unlock bootloader
Software version: 6.5

please fix
 
  • Like
Reactions: GsmToto

Saimmobiles711

Active Member
Mar 19, 2022
17
5
Allahabad
Selected model: OPPO CPH1909 (OPPO A5s)
Operation: Repair
Software version: 6.5
Work ID: 21518254

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7A1B46DA, 0xE5EF21C7, 0x5DB4B8A1, 0xE5C2EF3F
Get Chip ID... [MT6771]
Get SOC ID... [208B129D6828A335EA342B1EEF72D1F3B506B9637AB018CFACB1C05D1E8B30D4]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [9]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A484347386134A5DE3299FE2659
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HCG8a4
EMMC_ID : 0x90014A484347386134A5DE3299FE2659
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000039000 (228.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Model : oppo6771
Product Board : RM6771_18601
Board Platform : mt6771
Build ID : QP1A.190711.020
Build Date : Tue Jul 27 11:44:15 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-07-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 911000000000000
IMEI 2: 911000000000000
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching CERT... already patched, skip
Updating NVRAM... OK
Read security partition from phone... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Selected "Disable VBMETA verification"
Read security partition from phone... error(STATUS_INVALID_PARAMETERS)
Same here in many models
 

Saimmobiles711

Active Member
Mar 19, 2022
17
5
Allahabad
Security Patch : 2021-05-05

Version SDK : 29

Version Release : 10

Version Codename : REL

Read security partition from phone...

Decrypting security data... OK

Encrypt security data... OK

Read partition "nvdata"... OK

Read partition "protect1"... OK

Read partition "nvram"... OK

Read NVDATA files... OK

Read NVRAM files... OK

Read security files... OK

Calculating... OK

Repairing IMEI...

IMEI 1: 911000000000000

IMEI 2: 911000000000000

Write IMEI and patch CERT [NVDATA]... OK

Checking patch type... [1]

Patching CERT... already patched, skip

Updating NVRAM... OK

Read security partition from phone... OK

Write security partition to phone... OK

Checking additional lock... [DISABLED]

Selected "Disable VBMETA verification"

Read security partition from phone... error(STATUS_INVALID_PARAMETERS)
After update show this same error in many models
 

pooltec

Active Member
Sep 27, 2019
17
1
please help , v6.5 error imei repair motorola XT2097-12
 

Attachments

  • Sin título.jpg
    Sin título.jpg
    204.3 KB · Views: 4

aliipi

Friend's Martview
Oct 28, 2019
145
46


-
Pandora PRO 6.4. Exclusive solution and new devices added.


Exclusive solution - Patch/Repair CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)


Added support MTK phones:

- CPH2357 Oppo Reno8 Pro 5G
- CPH2437 Oppo Find N2 Flip
- CPH2481 Oppo Reno8 T
- CPH2607 Oppo Reno11 Pro 5G
- OPD2201 Oppo Pad 2
- OPD2202 Oppo Pad 2
- OPD2301 Oppo Pad Air 2
- OPD2302 Oppo Pad Neo
- OPD2303 Oppo Pad Neo
- PHV110 Oppo Reno10 Pro 5G
- PJH110 Oppo Reno11 5G

- Blackview BL8000, Blackview BL8800, Blackview BL8800 Pro, Blackview BL9000, Blackview BV4800
- Blackview BV5200, Blackview BV5200 Pro, Blackview BV5300, Blackview BV5300 Plus, Blackview BV5300 Pro,
- Blackview BV6200, Blackview BV6200 Pro, Blackview BV7100, Blackview BV7200, Blackview BV8900,
- Blackview BV8900 Pro, Blackview BV9200, Blackview Oscal C30, Blackview Oscal C30 Pro,
- Blackview Oscal S60 Pro Night Vision, Blackview Oscal S70, Blackview Oscal S70 Pro, Blackview Oscal S80,
- Blackview Tab 13, Blackview Tab 13 Pro, Blackview Tab 11 WiFi, Blackview A96, Blackview A200 Pro,
- Blackview Active 8 Pro, Blackview BV9300, Blackview BV9300 Pro, Blackview N6000, Blackview Oscal Tiger 12,
- Blackview Shark 8, Blackview Tab 18*
- Realme Pad 2 RMP2204/RMP2205

- Oukitel C21 Plus, Oukitel C31, Oukitel C31 Pro, Oukitel C90 Pro, Oukitel F150 H2022, Oukitel RT2,
- Oukitel RT3, Oukitel WP18 Pro, Oukitel WP20 Pro, Oukitel WP22, Oukitel WP30 Pro

- Kyocera: A001KC Katan Sumaho 2, A201KC Katan Sumaho 2 Plus, KC-T304, KC-T304C,
- KY-42C Digno Keitai R, KY-43C Digno Mobile Cameraless, KYT34 Digno Tab WiMAX 2 Plus,
- KYV47 Basio 4, KYV48 Gratina, S6-KC S6, S8-KC S8

- OnePlus CPH2389 Nord N300, CPH2399, CPH2401 Nord 2T, CPH2469 Nord N20 SE

- UmidigiA13 Pro 5G, Umidigi A13 Pro Max 5G

- Sparx Neo X

- Xiaomi Redmi 13C/Poco C65 (Thanks for iProServis(Hojiakbar))



Added support for new Unisoc devices:

- Blackview A52 Pro, Blackview A53, Blackview A53 Pro, Blackview Active 6, Blackview Active 8,
- Blackview Oscal C70, Blackview Oscal Flat 1C, Blackview Oscal Modern 8, Blackview Oscal Pad 13,
- Blackview Oscal Pad 15, Blackview Oscal Pad 16, Blackview Oscal Pad 18, Blackview Oscal Spider 8,
- Blackview Oscal Tiger 10, Blackview Tab 3 Kids, Blackview Tab 7 Pro, Blackview Tab 12 Pro, Blackview Wave 6C,
- Blackview Tab 15 Pro, Blackview Tab 16, Blackview Tab 60, Blackview Tab 60 Kids, Blackview Tab 80

- Nokia C22 (TA-1533, TA-1536, TA-1539, TA-1541)*

- Umidigi A13 Tab, Umidigi A15, Umidigi A15C, Umidigi A15 Tab, Umidigi Active T1, Umidigi G3 Max,
- Umidigi G3 Plus, Umidigi G5, Umidigi G5 Mecha, Umidigi G5 Tab, Umidigi G5 Tab Kids

- Oukitel C32, Oukitel C36

- Sparx Neo 5 Plus, Sparx Neo 7 Ultra, Sparx Neo 7 Plus, Sparx S3, Sparx S9*

- RMX3830 Realme C51, RMX3834 Realme Note 50, RMP2105 Realme Pad Mini, RMP2106 Realme Pad Mini


List of supported functions for listed Unisoc phones (Relock/Unlock Bootloader, Backup/Write/Format RPMB, Erase FRP, Format Flash, Read Info/IMEI/Partitions, Restore From Backup, Unlock Network, Switch Slot, Repair, Wipe Data/Partitions, Fix Dm-Verity)




Added repair/patch CERT support for Oppo/Realme/OnePlus phones in Preloader mode (for compatible FW)

IMPORTANT:
When you will use this function software will detect details of FW and will give you know: supported FW or not)



GUI changes:

- Added: Turkish and Arabic languages

- Added: New button icons

- Added: Activation/Renewal by "1 year activation code"


Improved and added: support new security Repair and Patch CERT for Oppo/Realme/OnePlus


180.21 MB file on MEGA

Pandora_setup_6.5 .exe



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE


repair imei fail in new version 6.5

Selected model: Infinix X6515 (Infinix X6515)
Operation: Repair
Software version: 6.5

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM164 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x6F060DB5, 0xA8DE8E63, 0x9623E635, 0x58979EDD
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0xF401224152563131581348B0854FB9FB
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARV11X
EMMC_ID : 0xF401224152563131581348B0854FB9FB
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E90000000 (58.25Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6515
Product Name : X6515-OP
Product Device : Infinix-X6515
Product Board : Infinix-X6515
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Tue Jun 20 14:33:30 CST 2023
Display ID : INFINIX-S-64-230620V739
Security Patch : 2023-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 230620V925
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... error(5)
 

GsmToto

Super Moderator
Jan 1, 2021
4,796
21,408
UK
Skype
gsmtoto
Sonork ID
100.1684601
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM25
Port: USB\VID_1782&PID_4D00\5&30CD2A0&0&1
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ZY22HHJNT4
Flash Type: UFS
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : cancun
Product Name : cancun_g
Product Device : cancun
Board Platform : UMS9230T
Build ID : TLBS33.78-180-1-1
Build Date : Sat Jan 13 14:36:15 CST 2024
Display ID : TLBS33.78-180-1-1
Security Patch : 2024-01-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 01131436
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!
 
  • Like
Reactions: SPYROS

adeeb588

Member
Sep 15, 2021
7
0
Lahore
Selected model: OPPO CPH2119 (OPPO F17 Pro)
Operation: Read Flash Info
Software version: 6.5

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM61 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0725
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6779]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0725
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6779]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Waiting for device... timeout

????
How to fix this problem
 
Top