OPPO CPH 1969 PATTERN LOCK ERROR HELP

[mabaitamama2019]

write this extcsd to solve your problem

 

[khan1845]

not done for me after factory reset and clear FRP lock the phone is dead



how to solve this


Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-3903
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0xCAD345F0
Manufacturing date: Nov 2018
CID: 90014A68 43386150 3E03CAD3 45F0B5DC
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Done
Creating filesystem with parameters:
Size: 54229184512
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13239547
Block groups: 405
Reserved block group size: 1024
Created filesystem with 11/3311280 inodes and 253913/13239547 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x01E0F0C4
Wrote 5101329 blocks, expected to write 13239547 blocks
Done
Done
[179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

 

[Altamashsodha]

not done for me after factory reset and clear FRP lock the phone is dead



how to solve this


Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-3903
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0xCAD345F0
Manufacturing date: Nov 2018
CID: 90014A68 43386150 3E03CAD3 45F0B5DC
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Done
Creating filesystem with parameters:
Size: 54229184512
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13239547
Block groups: 405
Reserved block group size: 1024
Created filesystem with 11/3311280 inodes and 253913/13239547 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x01E0F0C4
Wrote 5101329 blocks, expected to write 13239547 blocks
Done
Done
[179]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

Write ext csd file