Huawei Honor x5 FRP Bypass / Hard Reset / VNA-LX2 FRP Bypass
Huawei Honor x5 FRP Bypass / Hard Reset / VNA-LX2 FRP Bypass
Latest Security Done With UMTMTK TOOL
Latest Security Done With UMTMTK TOOL
UMT Post Here Sucessfully Unlocked/Repair Phones With Umt Tool
- Thread starter Abdullah
- Start date
UMT Box
- Remove FRP Samsung M115F U2 By Ultimate Multi Tool - QcFire -
Code:
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM8)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E17907D02EBABFA07EC
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_036]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : QP1A.190711.020.M115FXXU2AUA3, M115FXXU2AUA3 [Thu Jan 28 17:22:46 KST 2021]
Android Ver. : 10
Patch Level : 2021-02-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.5
Job: Remove FRP
SELECTED: SM-A032F
ACTION: Erase FRP
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off(you can service this phone without battery also).
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C8C90 [5e] 916123
UID: 38b@0B_5_66_35
FileSystem: EMMC
Read partition info is supported by loader.
XXXXXXXXXXXXXXXX
Manufacturer: samsung
Brand: samsung
Device: a3core
Model: SM-A032F
Build ID: SP1A.210812.016
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3corexx-user 12 SP1A.210812.016 A032FXXS4BWH3 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: SP1A.210812.016.A032FXXS4BWH3
Security patch: 2023-08-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
SELECTED: SM-A032F
ACTION: Erase FRP
Start Detect phone.
Testpoint image link for this model is located in utils tab
Phone must be off(you can service this phone without battery also).
Connect Testpoint while inserting usb cable.
After booting, testpoint can be removed.
Detected: SPRD U2S Diag (COM2)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C8C90 [5e] 916123
UID: 38b@0B_5_66_35
FileSystem: EMMC
Read partition info is supported by loader.
XXXXXXXXXXXXXXXX
Build ID: SP1A.210812.016
CPU arhitecture: armeabi-v7a
Build product name: a3core
Build description: a3corexx-user 12 SP1A.210812.016 A032FXXS4BWH3 release-keys
Build Id: SP1A.210812.016
Android Release: 12
Android Version: SP1A.210812.016.A032FXXS4BWH3
Security patch: 2023-08-01
CPU NAME: SC9863A
Removing frp, wait...
Found [persistent] [persistent] Size to download: 1024 KB
[1]FRP: persistent
Done.
Sparx Neo 8 plus FRP Bypass / unlock / Sparx Mobile Frp Bypass UMT Tool
Sparx Neo 8 plus FRP Bypass / unlock / Sparx Mobile Frp Bypass UMT Tool
Please Subscribe My Channel For More Videos and Support Thanks
Samsung A03s (SM-A037F) FRP/Google Account Bypass PL Exploit Without Test Point
mian.sajid
Moderator
itel s665l frp removed
Code:
Job: Remove FRP
SELECTED: Tiger T612(UMS9230)
ACTION: Erase FRP
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM39)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
UID: 007429c6022ad39f
FileSystem: UFS
Read partition info is supported by loader.
CPU NAME: T612
Removing frp, wait...
[1]FRP: persist
Format OK.
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\UMT\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_erase_frp.txt
Total Time: 00:00:55
Done.Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500500 [8917] 00000000
OPK_DATA : 8D38F8EB0CBB95080DCEDFBE45E94AC61F6F97294B272A65DBFB3329E55CB750
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_016]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo TB-8504F [msm8937] [TB-8504F]
Brand : Lenovo
Prod.Name : TB-8504F
Software : TB-8504F_S000129_170518_ROW, TB-8504F_S000129_170518_ROW [2017年 05月 18日 星期四 06:58:07 CST]
Android Ver. : 7.1.1
Patch Level : 2017-06-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM122)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500500 [8917] 00000000
OPK_DATA : 8D38F8EB0CBB95080DCEDFBE45E94AC61F6F97294B272A65DBFB3329E55CB750
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_016]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LENOVO Lenovo TB-8504F [msm8937] [TB-8504F]
Brand : Lenovo
Prod.Name : TB-8504F
Software : TB-8504F_S000129_170518_ROW, TB-8504F_S000129_170518_ROW [2017年 05月 18日 星期四 06:58:07 CST]
Android Ver. : 7.1.1
Patch Level : 2017-06-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2
Sweetsonu984
Friend's Martview
UMT ROCK....
OPPO A55 CPH2325 SUCESSFULLY FRP DONE VERSION.. CPH2325_11_a.19
SELECT.....PL_EXPLOIT
USING PL_EXLOIT [OPPO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM41)
Device Path : \\?\usb#vid_22d9&pid_0006#6&186afa3&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 81BBF93B920648AC28233BA44A55BA7E
SoC ID[0] : D160C2FE81DAF57D337A0FA473040CE8
SoC ID[1] : 14701D59312918CE324E026A1452A9AB
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E030001F505C893
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
OPPO A55 CPH2325 SUCESSFULLY FRP DONE VERSION.. CPH2325_11_a.19
SELECT.....PL_EXPLOIT
USING PL_EXLOIT [OPPO V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM41)
Device Path : \\?\usb#vid_22d9&pid_0006#6&186afa3&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 81BBF93B920648AC28233BA44A55BA7E
SoC ID[0] : D160C2FE81DAF57D337A0FA473040CE8
SoC ID[1] : 14701D59312918CE324E026A1452A9AB
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E030001F505C893
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
- Remove FRP Huawei P30 Lite MAR-LX1A 10.0.0.562(431) By UMTv2 - UltimateHST -
_ Remove FRP Samsung A226BR U9/13 By UMTPro - UltimateMTK2 _
Code:
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&b6e276f&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : , []
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 44A1468F2D67B79BE12DC9ADBACD1741
SoC ID[0] : 52BECD9D5FA2600D94533A3EF72F1CB4
SoC ID[1] : 5ACDC36E90BE901C26833BD32CE5BF4E
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_s96801aa2.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010044563644424200BC1ED0CB6975 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DV6DBB
CID : 15010044563644424200BC1ED0CB6975
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1F000000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Wed Mar 13 07:09:30 KST 2024
Display ID : TP1A.220624.014.A226BRUBS9DXC1
Ver. Inc. : A226BRUBS9DXC1
Locale : en-GB
Patch : 2023-12-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Model : MediaTek FRP
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM3 : SAMSUNG Mobile USB Modem #5
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM3 : SAMSUNG Mobile USB Modem #5
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:23
[UltimateSams v9.5]
Operation : All MediaTek 2023
Searching for Phone...Found
Port: : COM3 : SAMSUNG Mobile USB Modem #5
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : MTK6765 [HiSpeed]
Closing Session...Done
Port: : COM3 : SAMSUNG Mobile USB Modem #5
Checking for Device...Found [Download Mode]
Resetting FRP Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:23
[UltimateSams v9.5]
Operation : Reset FRP (Sideload)
Searching for phone in sideload mode...Found
Device Id : XERHN
Version : V13.0.1.0.SJUINXM
Code Base : 12
Serial : 0x9d55708b
Ext Info : IN, en, F, 2, 2
Model : vayu_in
Reading Partition Table...[106] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 9.5
Searching for phone in sideload mode...Found
Device Id : XERHN
Version : V13.0.1.0.SJUINXM
Code Base : 12
Serial : 0x9d55708b
Ext Info : IN, en, F, 2, 2
Model : vayu_in
Reading Partition Table...[106] OK
Resetting FRP...Done
Operation Finished.
QcFire Ver. 9.5
mian.sajid
Moderator
Ngoclamgsm
Product Supporter
XIAOMI REDMI NOTE 9 5G (LIME) MIUI V14 RESET MI ACCOUNT NEW DONE BY UMT
Note: Use Rst Mi Acc (New)
Note: Use Rst Mi Acc (New)
zohaibmunna333
Junior Member
Sweetsonu984
Friend's Martview
Samsung Galaxy Tab A7 Lite SM-T227U, PATTREN & FRO DONE... WITH UMT DONGLE.
.
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM12)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&186afa3&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8C3CE83B5FCB52EB8F22939F04423F9A
SoC ID[0] : F392653ED424DB2A02B371ABD10B0F0B
SoC ID[1] : 9A2F53C7B74053494E318706DBBDB178
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ot8.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100475836424142006C1DD0E86A07 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GX6BAB
CID : 150100475836424142006C1DD0E86A07
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : samsung
Ven. Model : SM-T227U
Platform : mt6765
And. Ver. : 13
Build Dt. : Fri Mar 31 16:24:51 KST 2023
Display ID : TP1A.220624.014.T227UVLS5DWC5
Ver. Inc. : T227UVLS5DWC5
Locale : en-CA
Patch : 2023-04-01
Bootloader : LOCKED
Formatting Userdata (Safe Mode)...OKOK
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.0]
Log Saved : 20240430_102108.log
.
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM12)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&186afa3&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8C3CE83B5FCB52EB8F22939F04423F9A
SoC ID[0] : F392653ED424DB2A02B371ABD10B0F0B
SoC ID[1] : 9A2F53C7B74053494E318706DBBDB178
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_ot8.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100475836424142006C1DD0E86A07 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : GX6BAB
CID : 150100475836424142006C1DD0E86A07
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : samsung
Ven. Model : SM-T227U
Platform : mt6765
And. Ver. : 13
Build Dt. : Fri Mar 31 16:24:51 KST 2023
Display ID : TP1A.220624.014.T227UVLS5DWC5
Ver. Inc. : T227UVLS5DWC5
Locale : en-CA
Patch : 2023-04-01
Bootloader : LOCKED
Formatting Userdata (Safe Mode)...OKOK
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.0]
Log Saved : 20240430_102108.log
