Legitunlocks.com
IC Chip

New Update Octoplus Huawei Tool v.1.3.5 is out!

S

SPYROS

Product Supporter
Jan 27, 2023
266
883
PK
Octoplus Huawei Tool v.1.3.5 is out!


Octoplus Huawei Tool v.1.3.5 Release Notes:​

Added Qualcomm loaders for Qualcomm Snapdragon 680, 695, 450, 778+, 8+ Gen1, 888:
​

  • Honor X7b (CLK-LX1, CLK-LX2, CLK-LX3)
  • HHuawei Y7 (2019) (DUB-LX3)
  • Honor Magic5 Lite (RMO-NX3)
  • Honor X9a (RMO-NX1)
  • Honor X40 (RMO-AN00)
  • Honor 70 (FNE-AN00, FNE-NX9)
  • Huawei P60 (LNA-AL00, LNA-LX9)
  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Honor X7 (CMA-LX2, CMA-LX1, CMA-LX3)
  • Huawei P50 Pro (JAD-AL00, JAD-AL50)
  • Honor X40 GT (ADT-AN00)
  • Honor Magic3 (ELZ-AN00)
  • Huawei Mate Xs 2 (PAL-AL00, PAL-LX9)


Added "Unlock Bootloader" for the following devices:
​

  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Huawei Mate 50 Pro (DCO-AL00, DCO-LX9)




Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!​
Find out more at: www.octoplusbox.com​


 
  • Like
Reactions: Alijaan, Dxdiag32, Hi•Tech and 2 others
dany_boy

dany_boy

Friend's Martview
Oct 28, 2017
123
16
Pakistan punjab
Skype
[email protected]
SPYROS said:

Octoplus Huawei Tool v.1.3.5 is out!​
​
​
Octoplus Huawei Tool v.1.3.5 Release Notes:​
​
​
Added Qualcomm loaders for Qualcomm Snapdragon 680, 695, 450, 778+, 8+ Gen1, 888:​
​

​
​
  • Honor X7b (CLK-LX1, CLK-LX2, CLK-LX3)
  • HHuawei Y7 (2019) (DUB-LX3)
  • Honor Magic5 Lite (RMO-NX3)
  • Honor X9a (RMO-NX1)
  • Honor X40 (RMO-AN00)
  • Honor 70 (FNE-AN00, FNE-NX9)
  • Huawei P60 (LNA-AL00, LNA-LX9)
  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Honor X7 (CMA-LX2, CMA-LX1, CMA-LX3)
  • Huawei P50 Pro (JAD-AL00, JAD-AL50)
  • Honor X40 GT (ADT-AN00)
  • Honor Magic3 (ELZ-AN00)
  • Huawei Mate Xs 2 (PAL-AL00, PAL-LX9)

​
​
​
Added "Unlock Bootloader" for the following devices:​
​

​
​
  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Huawei Mate 50 Pro (DCO-AL00, DCO-LX9)

​
​
​
​
Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!​
Find out more at: www.octoplusbox.com​


Click to expand...
Is imei repair spotted this model
 
GSM YOUSAF

GSM YOUSAF

Friend's Martview
Aug 6, 2021
258
60
pakistan
Searching for server...
Server greeting: "Card updates server v.2.2"
Searching installed cards...
Found card with s/n 200007FB7
Selected card: 0200007FB7
Updates count: 19
Updates limit: 22
Activations:
- LG - NO
- Samsung - NO
- Medusa - NO
- Huawei - NO
- FRP - NO
Activation string checking failed!
Please, contact to Your reseller.
Dear octuplus team my card is damage blocked from server side due to shairing please give me one last chance i m an old user of octuplus since from 4 or 5 years please make it possible to use this device i will be very thankfull to octoplus team.
in this card i have activated huawei tool and frp tool.
 
GsmToto

GsmToto

Super Moderator
Jan 1, 2021
5,159
21,877
UK
Skype
gsmtoto
Sonork ID
100.1684601
Starting Reset FRP
Selected phone model: ‪JKM-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: HYJ4C19408003066
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JKM-LX1‬
System: ‪JKM-LX1 9.1.0.363(C185E6R5P1)‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.363‬
Custom Version: ‪JKM-LX1-CUST 9.1.0.6(C185)‬
Preload Version: ‪JKM-LX1-PRELOAD 9.1.0.1(C185R5)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 1 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JKM-LX1‬
System: ‪JKM-LX1 9.1.0.363(C185E6R5P5)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.4‬ Software version.
 
  • Like
Reactions: Hi•Tech
GsmToto

GsmToto

Super Moderator
Jan 1, 2021
5,159
21,877
UK
Skype
gsmtoto
Sonork ID
100.1684601
Welcome to Octoplus Huawei Software v. 1.3.5.1

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 HUAWEI Mobile Connect - Fake Acm Interface
2: COM2 DBAdapter Reserved Interface
3: COM3 Android Adapter PCUI

Job ID: 000000000190ADC9
2024-11-01 13:02:56
Starting Direct Unlock
Selected phone model: SNE-LX1
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Canceling... Please be patient!
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Direct Unlock canceled.
Performed by 1.3.5.1 Software version.

Job ID: 0000000001FFB160M
2024-11-01 13:10:55
Starting Direct Unlock
Selected phone model: SNE-LX1
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: HVYDU1800740B1N60
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: SNE-LX1
System: SNE-L01 12.0.0.227(C432F3R1P1)
Android Version: 10
Base Version: SNE-LGRP2-OVS 102.0.0.227
Custom Version: SNE-L01-CUST 102.0.0.3(C432)
Preload Version: SNE-L01-PRELOAD 102.0.0.1(C432R1)
C_Version: C432
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 1 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: SNE-LX1
System: SNE-L01 12.0.0.227(C432H3R1P1)
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.3.5.1 Software version.
 
A

aliipi

Friend's Martview
Oct 28, 2019
160
49
SPYROS said:

Octoplus Huawei Tool v.1.3.5 is out!​
​
​
Octoplus Huawei Tool v.1.3.5 Release Notes:​
​
​
Added Qualcomm loaders for Qualcomm Snapdragon 680, 695, 450, 778+, 8+ Gen1, 888:​
​

​
​
  • Honor X7b (CLK-LX1, CLK-LX2, CLK-LX3)
  • HHuawei Y7 (2019) (DUB-LX3)
  • Honor Magic5 Lite (RMO-NX3)
  • Honor X9a (RMO-NX1)
  • Honor X40 (RMO-AN00)
  • Honor 70 (FNE-AN00, FNE-NX9)
  • Huawei P60 (LNA-AL00, LNA-LX9)
  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Honor X7 (CMA-LX2, CMA-LX1, CMA-LX3)
  • Huawei P50 Pro (JAD-AL00, JAD-AL50)
  • Honor X40 GT (ADT-AN00)
  • Honor Magic3 (ELZ-AN00)
  • Huawei Mate Xs 2 (PAL-AL00, PAL-LX9)

​
​
​
Added "Unlock Bootloader" for the following devices:​
​

​
​
  • Huawei P60 Pro (MNA-AL00, MNA-LX9)
  • Huawei Mate 50 (CET-AL00, CET-LX9)
  • Huawei Mate 50 Pro (DCO-AL00, DCO-LX9)

​
​
​
​
Dongle or Activation are already available for purchase from GsmServer Store. Ask your local dealers!​
Find out more at: www.octoplusbox.com​


Click to expand...

Job ID: 000000000190B8FF
2024-11-17 21:52:08
Starting Reset Huawei ID
Selected phone model: ‪BMH-AN10‬
Selected method: Reset Huawei Id (EMUI12/Harmony)
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN820_985_V4...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Reset Huawei ID failed.
Performed by ‪1.3.5‬ Software version.
=========================================
Job ID: 000000000205EFA5
2024-11-17 22:00:06
Starting Read Info
Selected phone model: ‪BMH-AN10‬
Searching Fastboot devices...
Found android device: ANP0220421001815
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪BMH-AN10‬
System: ‪BMH-AN10 4.2.0.120(C00E100R4P4)‬
Android Version: ‪12‬
Base Version: ‪BMH-LGRP1-CHN 104.2.0.120‬
Custom Version: ‪BMH-AN10-CUST 104.2.0.100(C00)‬
Preload Version: ‪BMH-AN10-PRELOAD 104.0.0.4(C00R4)‬
C_Version: ‪C00‬
D_Version: ‪D000‬
Read Info done.
Performed by ‪1.3.5‬ Software version.
 
  • Like
Reactions: GsmToto
GsmToto

GsmToto

Super Moderator
Jan 1, 2021
5,159
21,877
UK
Skype
gsmtoto
Sonork ID
100.1684601
Starting Reset Huawei ID
Selected phone model: ‪ART-AL00X‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: HRXNW20S6H8J9K
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪ART-L29N‬
System: ‪ARTH-L29N 10.1.0.260(C10E2R4P1)‬
Android Version: ‪10‬
Base Version: ‪ART-LGRP2-OVS 10.1.0.260‬
Custom Version: ‪ARTH-L29N-CUST 10.1.0.2(C10)‬
Preload Version: ‪ARTH-L29N-PRELOAD 10.1.0.1(C10R4)‬
C_Version: ‪C10‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 1 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪ART-L29N‬
System: ‪ARTH-L29N 10.1.0.260(C10E2R4P1)‬
Resetting Huawei ID...
Rebooting device...
Warning: Please perform "Clear data" manually via Recovery Mode, if your device doesn`t start properly!
Reset Huawei ID done.
Performed by ‪1.3.5‬ Software version.
 
You must log in or register to reply here.
Top