Solved Moto G35 5G XT2433-3 FRP RESET DONE WITHOUT DEAD RISK

[.::Greed::.]

FRP Removal Guide For Moto G35 (XT2433-3) WORKING 100%​

---

Required Files & Tools

Download Contents

• For Flashing Software Fix
• Moto G35 5G XT2433 FRP File: Click Here

Important Note (Before Starting FRP Process):

1. First, download the required files using the software provided by Software Fix.
2. If you face any issues, make sure to follow their instructions step-by-step.
3. To download the correct file:

• Boot the phone into Fastboot Mode.
• Copy the IMEI number shown in Fastboot Mode.
• Paste the IMEI into the Software Fix tool to download the exact matching file for your device.

​

Step-by-Step Instructions:

Step 1: Set Up Your PC

• Install SPD USB drivers (search: “SPD Unisoc USB driver install”).
• If drivers don’t install, disable Driver Signature Enforcement (Google this if unsure).

Step 2: Extract and Open Tools

• Unzip the FRP Tool Package.
• Open ResearchDownload Tool.
• Load the .pac file ( Click the gear icon and select it ).

Step 3: Select Only Required Files

• Click on Settings (the two gears icon).
• Uncheck everything.
• Only check:
  • FDL1
  • FDL2
  • persist
• Click OK to confirm.

Step 4: Prepare Your Phone

• Power off the phone completely.
• Remove the back cover.
• Locate the Test Point on the motherboard

Step 5: Connect via Test Point

• Use tweezers to short the test point to ground.
• While holding it, plug the USB cable into the PC.
• The phone will enter diag mode.

Step 6: Start Flashing

• In ResearchDownload Tool, click the Play button (Start).
• Wait for the flashing to complete.
• You’ll see “Passed” or a green check.

Step 7: Final Step

• Disconnect the phone.
• Power it on.
• FRP lock is gone — no more Google account screen.

In Case of Boot Warning:

• If your device shows a message like:

“Your device is corrupt. It can’t be trusted and may not work properly. Press power button to continue.”​

• Don’t panic. This can be fixed easily. It may take some time to enter Fastboot Mode—be patient.
  (I personally faced this issue, so don’t worry if it seems delayed.)
• Just flash the firmware in Fastboot Mode using the file downloaded via Software Fix.
• Make sure to download the file before starting the FRP process, so you're prepared if this message appears.

---

If you find my post helpful, press like button✌​

 

[Harsh gsm]

FRP Removal Guide For Moto G35 (XT2433-3) WORKING 100%​

---

Required Files & Tools

Download Contents

• For Flashing Software Fix
• Moto G35 5G XT2433 FRP File: Click Here

Important Note (Before Starting FRP Process):

1. First, download the required files using the software provided by Software Fix.
2. If you face any issues, make sure to follow their instructions step-by-step.
3. To download the correct file:

• Boot the phone into Fastboot Mode.
• Copy the IMEI number shown in Fastboot Mode.
• Paste the IMEI into the Software Fix tool to download the exact matching file for your device.

View attachment 74979 ​

Step-by-Step Instructions:

Step 1: Set Up Your PC

• Install SPD USB drivers (search: “SPD Unisoc USB driver install”).
• If drivers don’t install, disable Driver Signature Enforcement (Google this if unsure).

Step 2: Extract and Open Tools

• Unzip the FRP Tool Package.
• Open ResearchDownload Tool.
• Load the .pac file ( Click the gear icon and select it ).

Step 3: Select Only Required Files

• Click on Settings (the two gears icon).
• Uncheck everything.
• Only check:
  • FDL1
  • FDL2
  • persist
• Click OK to confirm.

Step 4: Prepare Your Phone

• Power off the phone completely.
• Remove the back cover.
• Locate the Test Point on the motherboard

Step 5: Connect via Test Point

• Use tweezers to short the test point to ground.
• While holding it, plug the USB cable into the PC.
• The phone will enter diag mode.

Step 6: Start Flashing

• In ResearchDownload Tool, click the Play button (Start).
• Wait for the flashing to complete.
• You’ll see “Passed” or a green check.

Step 7: Final Step

• Disconnect the phone.
• Power it on.
• FRP lock is gone — no more Google account screen.

In Case of Boot Warning:

• If your device shows a message like:

• Don’t panic. This can be fixed easily. It may take some time to enter Fastboot Mode—be patient.
  (I personally faced this issue, so don’t worry if it seems delayed.)
• Just flash the firmware in Fastboot Mode using the file downloaded via Software Fix.
• Make sure to download the file before starting the FRP process, so you're prepared if this message appears.

---

If you find my post helpful, press like button✌​

Bro U have Deadboot Repair Full pack file ?
Plz Given link

 

[.::Greed::.]

First Flash With This File; UNTICK ISE & ISE DATA. Then Check
If In Case of Boot Warning:

• If your device shows a message like:

“Your device is corrupt. It can’t be trusted and may not work properly. Press power button to continue.”

• Don’t panic. This can be fixed easily. It may take some time to enter Fastboot Mode—be patient.
  (I personally faced this issue, so don’t worry if it seems delayed.)
• Just flash the firmware in Fastboot Mode using the file downloaded via Software Fix.
• Make sure to download the file before starting the FRP process, so you're prepared if this message appears.

---

If you find my post helpful, press like button✌​

 

[Harsh gsm]

First Flash With This File; UNTICK ISE & ISE DATA. Then Check
If In Case of Boot Warning:

• If your device shows a message like:

• Don’t panic. This can be fixed easily. It may take some time to enter Fastboot Mode—be patient.
  (I personally faced this issue, so don’t worry if it seems delayed.)
• Just flash the firmware in Fastboot Mode using the file downloaded via Software Fix.
• Make sure to download the file before starting the FRP process, so you're prepared if this message appears.

---

If you find my post helpful, press like button✌​

Thank you bro I'll try

 

[.::Greed::.]

Thank you bro I'll try

Try and post the result. I had the same issue, but my phone recovered successfully.
but you have to flash in software fix tool