- Oct 7, 2019
- 33
- 37
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 12 MHz
CMD Pullup Level: 2075 mV
CMD Active Level: 2691 mV
EMMC Device Information :
EMMC CID: 150100523231424D4206999219116545
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: R21BMB , HEX: 523231424D42 , S/N:** , rev. 0x06
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 7132 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: R21BMB_99921911_20191006_025920.extcsd
EMMC Init completed.
Get firmware version
Manufacturer = unknown
CPU Abi = arm64-v8a
Android release = 8.0.0
Firmware version = System 8.0.0.073(00L5)
Firmware date = Fri Mar 1 17:37:57 CST 2019
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 12 MHz
CMD Pullup Level: 2075 mV
CMD Active Level: 2691 mV
EMMC Device Information :
EMMC CID: 150100523231424D4206999219116545
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: R21BMB , HEX: 523231424D42 , S/N: 99921911 , rev. 0x06
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 7132 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: R21BMB_99921911_20191006_025955.extcsd
EMMC Init completed.
Operation: Remove FRP
Searching GPT ...
GPT header is found and is valid
FRP signature found (partname: frp)
Erasing FRP partition ...
Done erasing partition.
All done
Setting bus width to 1 Bit
Setting frequence to 12 MHz
CMD Pullup Level: 2075 mV
CMD Active Level: 2691 mV
EMMC Device Information :
EMMC CID: 150100523231424D4206999219116545
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: R21BMB , HEX: 523231424D42 , S/N:** , rev. 0x06
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 7132 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: R21BMB_99921911_20191006_025920.extcsd
EMMC Init completed.
Get firmware version
Manufacturer = unknown
CPU Abi = arm64-v8a
Android release = 8.0.0
Firmware version = System 8.0.0.073(00L5)
Firmware date = Fri Mar 1 17:37:57 CST 2019
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 12 MHz
CMD Pullup Level: 2075 mV
CMD Active Level: 2691 mV
EMMC Device Information :
EMMC CID: 150100523231424D4206999219116545
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: R21BMB , HEX: 523231424D42 , S/N: 99921911 , rev. 0x06
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 7132 , Response: Not Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: R21BMB_99921911_20191006_025955.extcsd
EMMC Init completed.
Operation: Remove FRP
Searching GPT ...
GPT header is found and is valid
FRP signature found (partname: frp)
Erasing FRP partition ...
Done erasing partition.
All done