Have you tried selecting ufs storage type ? Click the storage type which is selected eMMC as default, and choose UFS. I hope it helps. GL.
If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here
- Thread starter Deepesh Sharma
- Start date
Global (M1906G7G) and China (M1906G7E) versions of the phone have hybrid (choose-2-from-3) sim slot, while India (M1906G7I) version has microsd-dedicated (which means you can use 2 sim cards and microsd card at the same time. I don't know why UFI throws ridiculous errors when it comes to India version. There are some speculations that the latter version has differrent chipset(Samsung).NOT ALL XIAOMI NOTE 8 PRO CAN BE FLASHED WITH UFI
THERE ARE TWO DIFFERENT MODELS FROM NOTE 8 PRO
ONE : WITH TWO SLOTS SIM CARD EVERY SIM IN SLOT : THIS CAN BE FLASH WITH UFI
OTHER : WITH ONE SLOT SIM CARD , TWO SIM CAN BE INSTALLED IN THE SAME SLOT . THIS CAN NOT FLASH :-(
CAN YOU EXPLAIN THE DIFFERENCE BETWEEN ????
Hi
Update your cpu os to windows 10 or reinstall full windows 10 os after check it.i am also face this same error this is the solution
Hi
Update your cpu os to windows 10 or reinstall full windows 10 os after check it.i am also face this same error this is the solution
[SERVER] Sorry, We have run out of all available slots, please try again in 6 hours.
I am getting the above error on UFI Android toolbox for Redmi 6, could you please let me know the solution for this.
Its urgent.
I am getting the above error on UFI Android toolbox for Redmi 6, could you please let me know the solution for this.
Its urgent.
NazruL Gsm
Junior Member
Redmi Note 8 Pro i am doing flash but not done (Credit Lost)
i have lost my credit for flashing issue. please check and refund it thank you.
Flash Image
i have lost my credit for flashing issue. please check and refund it thank you.
Flash Image
OPPO A3s CPH1853 stuck logo ####
flash Full image okay 1000%######
A23 donwlgrade A19##
ab mobile
farhan ab hurmain towir ali pur
flash Full image okay 1000%######
A23 donwlgrade A19##
ab mobile
farhan ab hurmain towir ali pur
2nd time im posting Team plz guide ..
i have purchased new ufi box almost two months before,
while reading backups UFi Emmc Toolbox error occured:
1st disconnection sound from set & then displaying error & stop after a while..
Already tried replacing both cables, tested 3 different sets, but same error.
Team plz guide suggestions..!
i have purchased new ufi box almost two months before,
while reading backups UFi Emmc Toolbox error occured:
1st disconnection sound from set & then displaying error & stop after a while..
Already tried replacing both cables, tested 3 different sets, but same error.
Team plz guide suggestions..!
Attachments
-
Ufi Error1.png -
Ufi Error2.png
I AM TODAY PURCHASE UFI PLZZ GUIDE HOW TO UNLOCK OPPO SET WITH SAFE MODE
IAM ALSO USE UMT MRT CM2 Z3X ETC LIKE FLASHING UNLOCK ETC
IAM ALSO USE UMT MRT CM2 Z3X ETC LIKE FLASHING UNLOCK ETC
I can't run.. stuck here at starting adb services.. please help me.. reply me please someone
Attachments
-
Untitled.png
@support
im trying to load an mtk scatter file and i get this error! ive tried different files as well but same? pls inform the solution!
wbr
Attachments
im trying to load an mtk scatter file and i get this error! ive tried different files as well but same? pls inform the solution!
wbr
Attachments
ufi scatter error.png
197 KBViews: 3
Bought the box new Complaitly install & others 3 software open goodly but Android toolbox this problem.
In the meantime, the problem has not been solved after new windows 10.
I tried another computer but didn't solve.
Please Help me please .
In the meantime, the problem has not been solved after new windows 10.
I tried another computer but didn't solve.
Please Help me please .
please help, I just bought ufi box for about 1 week, the problem is every time I write big data it always fails / I want to read / flash, always fails when big data. please give me the solution, thank you...
nnection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2432
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0xED549B56
Manufacturing date: Okt 2019
CID: 15010047 4436424D 4201ED54 9B56A6BC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Loading file: "\\D:\RMX1941(RMX1941EX_11_A.20-9-PPR1.180610.011)[QD63MB_487A6A2E]\RMX1941(RMX1941EX_11_A.20-9-PPR1.180610.011)[QD63MB_487A6A2E]\user_part\vendor.img", size: 816 MiB...
Writing vendor at 0x2D000000-0x5FFFFFFF (1671168 sectors)... Failed to write block 0x301F0000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
nnection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2432
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0xED549B56
Manufacturing date: Okt 2019
CID: 15010047 4436424D 4201ED54 9B56A6BC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Loading file: "\\D:\RMX1941(RMX1941EX_11_A.20-9-PPR1.180610.011)[QD63MB_487A6A2E]\RMX1941(RMX1941EX_11_A.20-9-PPR1.180610.011)[QD63MB_487A6A2E]\user_part\vendor.img", size: 816 MiB...
Writing vendor at 0x2D000000-0x5FFFFFFF (1671168 sectors)... Failed to write block 0x301F0000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
Attachments
-
P_20200626_103300.jpg
Last edited: