How To Replace Iphone 8 glass
- Thread starter rajsingh
- Start date
marksmiths
Junior Member
Replacing the glass on an iPhone 8 can be complex and requires careful handling. Here’s a step-by-step guide to help you:
Tools Needed:
- Replacement glass
- Pentalobe screwdriver
- Phillips screwdriver
- Heat gun or hair dryer
- Plastic prying tools
- Suction cup
- Adhesive strips
- Anti-static gloves (optional)
Steps to Replace iPhone 8 Glass:
- Power Off the iPhone
Turn off the device to avoid short circuits. - Remove Screws
Use a pentalobe screwdriver to remove the two screws near the charging port. - Heat the Edges
Use a heat gun or hair dryer to soften the adhesive around the screen edges. - Lift the Screen
Attach a suction cup near the bottom of the screen, gently pull up, and use a plastic prying tool to carefully loosen the adhesive. - Disconnect Cables
Carefully lift the screen and disconnect the battery and display cables using a Phillips screwdriver to remove the bracket covering them. - Remove the Broken Glass
Once the display is free, gently separate the broken glass from the display assembly. This step may require heating and scraping carefully. - Attach the New Glass
Secure the replacement glass onto the display assembly using adhesive strips. - Reconnect Components
Reconnect the display and battery cables, ensuring a snug fit. - Reassemble the iPhone
Align the display, press it back into place, and replace the screws at the bottom. - Test Your Phone
Power on your device and ensure the touch screen and display work correctly.
Important Tips:
- Consider Professional Repair: If you're not experienced with electronics, replacing the glass yourself may cause further damage.
- Use Quality Parts: Always opt for OEM or high-quality third-party parts.
- Warranty Check: Check if your phone is still under warranty or AppleCare+ for repair discounts.