to be able to repair the phone all you need is in the following link.
This LG G Stylo H631 Unbrick Solutions Can Recover Devices that Are:
1. LG G Stylo H631 that's stuck at HS-USB QDLoader 9008.
2. Those with Blank screen and in emmergency diag mode.
3. Those LG G Stylo H631 with verification failure issues.
4. Some LG G Stylo H631 that hangs booting or ends up in incessant reboots.
5. Having boot Certification Verify errors.
How to Unbrick (Debrick) LG G Stylo H631
On this page, we give you instructional tutorials for methods deployed, that which include the
QFIL and
Loader methods of unbricking LG G Stylo H631.
In the paragraphs that follow below here, we explain how to unbrick your LG G Stylo H631 device using either QFIL or the Loader method.
To Unbrick (Debrick) your LG G Stylo H631 Using QFIL QPST
1. Download the contents of the QFIL Folder from the LG G Stylo H631 Unbrick Project Folder and Extract them onto a folder on your PC.
2. Download HS-USB QDLoader
32Bit Drivers 64Bit Drivers here and install it on your PC.
3. Open the LG G Stylo H631 QFIL Files folder on your PC to view its content.
4. Launch (Open) QFIL on your PC. You may
download latest QPST from here if not installed on your PC yet.
5. Now, on QFIL, choose
Flat Build and for programmer choose the
firehose file seen in the QFIL Files folder you opened in
Step 3 above.
6. Click
Load XML and choose
rawprogam0.xml and
patch0.xml both in the QFIL Files folder in which the Firehose file is located.
7. Finally, click
Download. QFIL should successfully download the files on your LG G Stylo H631.
Once QFIL has successfully downloaded the files, your LG G Stylo H631 should reboot automatically. Note that first boot may take up to
15 minutes to complete!
To Unbrick (Debrick) your LG G Stylo H631 Using Loader File / SD Card
1. From the LG G Stylo H631 Unbrick Project Folder, download the loader file and extract it onto a folder on your PC.
2. Now, format your SD Card. exFAT is preferred.
3. Download DiskImageRev2 from here and extract it onto a folder on your PC then, open it.
View attachment 1688
4. Slot your SD Card in a card reader and connect it to your PC.
5. Launch
DiskImageRev2 on your PC - as Admin preferably.
6. On launch,
DiskImageRev2 should detect and display the drive where your SD Card is connected. If otherwise, browse to select the correct drive.
7. From
DiskImageRev2, browse to the folder where you saved / copied the
LG G Stylo H631 Loader.img file on your PC and select it.
8. Now, click
Write and wait until
DiskImageRev2 completes the process.
9. Once
DiskImageRev2 has successfully written the files on the SD Card, your SD Card is now bootable! You may now insert it on your LG G Stylo H631 and boot the device using its bootloader key combo.
Brief Note:
The Loader method requires a full ROM Dump also known as a full blk0 backup of a working LG G Stylo H631 correctly flashed or written on a pretty good and fast class 10 SD Card.
Please after repairing the phone upload the documents already downloaded to help others.
Thank you for your attention.
