Get firmware version
Brand = samsung
Manufacturer = samsung
Model = GT-I9300
Phone platform = exynos4
CPU Abi = armeabi-v7a
Android release = 4.3
Firmware version = JSS15J.I9300XXUGNB6
Firmware date = Tue Feb 25 15:30:51 KST 2014
Check eMMC in JTAG Port
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 742 mV
CMD Active Level: 1598 mV
EMMC Device Information :
EMMC CID: 15010056545530304DF18F2579CD4FFC
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacture : SAMSUNG , EMMC NAME: VTU00M , HEX: 56545530304D , S/N: 8F2579CD , rev. 0xF1
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2012
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_8F2579CD_20181029_204300.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Manufacturer = samsung
Model = GT-I9300
Phone platform = exynos4
CPU Abi = armeabi-v7a
Android release = 4.3
Firmware version = JSS15J.I9300XXUGNB6
Firmware date = Tue Feb 25 15:30:51 KST 2014
ScanPartition
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 742 mV
CMD Active Level: 1598 mV
EMMC Device Information :
EMMC CID: 15010056545530304DF18F2579CD4FFC
EMMC CSD: D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacture : SAMSUNG , EMMC NAME: VTU00M , HEX: 56545530304D , S/N: 8F2579CD , rev. 0xF1
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 4/2012
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: VTU00M_8F2579CD_20181029_204517.extcsd
EMMC Init completed.
Scan from: VTU00M
Vendor: Qualcomm
Searching GPT ...
GPT header is found and is valid
GPT header successfully parsed
Scan done
Mount [efs] successfully PartType: LINUX
Mount [cache] successfully PartType: LINUX
Mount [system] successfully PartType: LINUX
Mount [preload] successfully PartType: LINUX
Mount [data] successfully PartType: LINUX
Contacts Recover from Dead Phone
Extract contacts from contacts2.db
Init database engine (version: 3.23.0)
Found 6 accounts
Found 414 contacts
Saving data. Please wait ...
Saved file:
dir: \contacts_vcf\
file: contacts2_contacts.txt
file: contacts2_account.txt
All done
Press Like Only