Legitunlocks.com
Martview SP-01 Intelligent Screen Protector Film Cutter Machine

All Samsung Clone Models Firmware's Here

A

arahmanliza

Junior Member
Mar 6, 2017
2
0
kuwait
Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000660054000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0092 , [Micron] NAND_MT29C8G96MAZBADKD_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID : 0xE79051E35DDFDA9C7748895DB8C4A1F3
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : kingsung72_wet_lca , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

Operation Failed
Elapsed: 00:00:13
Reconnect Power/Cable!
Plsz.... any solution...
 
shafi_136

shafi_136

Active Member
Nov 4, 2016
87
27
dhaka
MT6575__samsung__Galaxy-S4__GT-I9505__4.2.2__ALPS.ICS2.MP.V1.20 flash file need help
preloader_mobitek75_ics2.bin (108 kb)
[Image Ok] : preloader_mobitek75_ics2.bin
[Image Ok] : DSP_BL
[Image Ok] : MBR
[Image Ok] : EBR1
[Image Ok] : lk.bin
[Image Ok] : boot.img
[Image Ok] : recovery.img
[Image Ok] : secro.img
[Image Ok] : logo.bin
[Image Ok] : EBR2
[Image Ok] : system.img
[Image Ok] : cache.img
[Image Ok] : userdata.img

Brand : samsung
ProdName : Galaxy-S4
ProdModel : Galaxy-S4
Device : GT-I9505
AndroidVer: 4.2.2
MTKxCPU : MT6575
MTKxPRJ : ALPS.ICS2.MP.V1.20

[ScatCFG] : MT6575 / V1.0.0 / mobitek75_ics2 / EMMC
FW Size : 547 MiB
Scatter saved to : C:\Users\gsmsaifulbd\Desktop\MT6575__samsung__Galaxy-S4__GT-I9505__4.2.2__ALPS.ICS2.MP.V1.20\

All done!
 
Admin

Admin

Administrator
Oct 21, 2016
1,112
2,839
Australia, Malaysia & Lebanon
Galaxy J8 (2016) MT6572 Firmware 6.0.1 | Flash File
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 108 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034472882738A6190B9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034472882738A6190B9
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E2283806A0443C9B557B9FEF97BC
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
Click to expand...

Brand : Samsung
ProdName : SM-J800FN
ProdModel : SM-J800FN
Device : j7209
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : J7209_6.0.1_V1.3 20160926-1742

[Read Ok] : preloader_j7209.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7209 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 622 MiB
Scatter saved to : C:\Users\Marhaba Lab\
MT6572__Samsung__SM-J800FN__j7209__4.2.2__J7209_6.0.1_V1.3_20160926-1742
preloader_j7209.bin 98.8KB

Samsung Galaxy J8 (2016) SM-J800 MT6572 Firmware 6.0.1
Download Here
 
  • Like
Reactions: anoamocreative, gsmegy, shafi_136 and 1 other person
D

danibutt19

Friend's Martview
Oct 23, 2016
110
31
Lahore
Samsung Clone GT-S7562
MT6572__samsung__GT-I8262__GT-I8262__4.2.2__ALPS.JB3.MP.V1
preloader_mbk72_wet_lca
Flash with various firmwares but all in vain. After screen lock touch not working please give me the solution or firmware please......
 
zohiab.sahiwal

zohiab.sahiwal

Active Member
Mar 13, 2017
62
94
sahiwal
Admin said:
Samsung Galaxy J1(2016) MT6582 Firmware / Flash file




Brand : Samsung
ProdName : Samsung Galaxy J1(2016)
ProdModel : Samsung Galaxy J1(2016)
Device : Samsung Galaxy J1(2016)
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : J8216_2G_5.1.1_V1.0

[Read Ok] : preloader_j8216.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / j8216 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 956 MiB
Scatter saved to : C:\Users\Marhaba Lab\
MT6582__Samsung__Samsung_Galaxy_J1(2016)__Samsung_Galaxy_J1(2016)__4.2.2__J8216_2G_5.1.1_V1.0
preloader_j8216.bin 114 Kb
All done!

Download Here
Password: Gsm Marhaba
Click to expand...
THANKS BHAI
 
Admin

Admin

Administrator
Oct 21, 2016
1,112
2,839
Australia, Malaysia & Lebanon
Samsung GALAXY Grand Prime G530H MT6572 Firmware | Flash File

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344702061F87345015
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344702061F87345015
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E2C00000
[eMMC] : FLASH_UCP : 3628 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E228BB621922ED9926B9375124C9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Click to expand...
Brand : Samsung
ProdName : G530H
ProdModel : G530H
Device : Samsung G530H(GALAXY Grand Prime)
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.38

[Read Ok] : preloader_keytak72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / keytak72_wet_lca / EMMC
Android Info saved
HWConfig Info saved
FW Size : 994 MiB
Scatter saved to : C:\Users\Marhaba_Lab\
MT6572__Samsung__G530H__Samsung_G530H(GALAXY_Grand_Prime)__4.2.2__ALPS.JB3.MP.V1.38
preloader_keytak72_wet_lca.bin 99.2Kb

Download Here
 
  • Like
Reactions: Rizwan ch08
Admin

Admin

Administrator
Oct 21, 2016
1,112
2,839
Australia, Malaysia & Lebanon
Samsung Galaxy J7 SM-J700H MT6572 Firmware | Flash File
MT6572__Samsung__SM-J700H__j7271__4.2.2__J7271G4_5.0_V1.2_20160823-1947
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344758243B0448715D
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758243B0448715D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E2280E82FA31D9394CF1BB0C2D27
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Click to expand...
Brand : Samsung
ProdName : SM-J700H
ProdModel : SM-J700H
Device : j7271
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : J7271G4_5.0_V1.2 20160823-1947

[Read Ok] : preloader_j7271.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / j7271 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 586 MiB
Scatter saved to : C:\Users\Marhaba_Lab
MT6572__Samsung__SM-J700H__j7271__4.2.2__J7271G4_5.0_V1.2_20160823-1947
preloader_j7271.bin 98.8
Download Here
 
Admin

Admin

Administrator
Oct 21, 2016
1,112
2,839
Australia, Malaysia & Lebanon
Galaxy J3 SM-J300H/DS MT6572 Firmware | Flash File
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8B00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E4A5330304D00B24D79FF70D9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 1501004E4A5330304D00B24D79FF70D9
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E228367E620A24E929BD11CE20F0
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Click to expand...

Brand : samsung
ProdName : SM-G530F
ProdModel : SM-G530F
Device : SM-G530F
AndroidVer: 4.4.4
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Read Ok] : preloader_mbk72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / mbk72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 481 MiB
Scatter saved to : C:\Users\Marhaba_Lab\
MT6572__samsung__SM-G530F__SM-G530F__4.4.4__ALPS.JB3.MP.V1
preloader_mbk72_wet_jb3.bin 98.5 Kb
All done!

Samsung SM-J300H/DS MT6572 Firmware | Flash File
Download Here
Password: Gsm Marhaba
 
  • Like
Reactions: Rizwan ch08 and Ajayitomilola
You must log in or register to reply here.
Top