All Qmobile Smart Phone Firmware's Here

[zahid saeed]

file is too short not added in resarch upgrade tool

 

[zahid saeed]

GsmMarhaba

 

[Rasooljan shinwari]

I have no word for thanks

 

[newmultan]

Thanks for uploading firmware

 

[Admin]

QMobile X150 MT6582 Firmware | Flash File

Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D420142F1CA3D715B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D420142F1CA3D715B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E228839A3E498A182F66B7EB3609
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : QMobile
ProdName : QMobile X150
ProdModel : QMobile X150
Device : QMobile X150
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : 2014-08-11 23:03:38

[Read Ok] : preloader_konka82_i255_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / konka82_i255_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 930 MiB
Scatter saved to : C:\Users\MarhabaLab\
MT6582__QMobile__QMobile_X150__QMobile_X150__4.4.2__2014-08-11_230338
preloader_konka82_i255_kk (111Kb)
All done!

Download Here

 

[Abdullah]

QMobile A290 MT6572 Firmware | Flash File Most Wanted..!!
S5201AP-4-1.0-RT-IEHC
preloader_s5201ap 97.5Kb
​

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Spoiler: CPU Information Here

Wait for phone...
Phone found! [ 47 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110103A1C6CE6255
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110103A1C6CE6255
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x0D22E228E725E43D1E767F96755B1F88
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand : QMobile
ProdName : QMobile A290
ProdModel : QMobile A290
Device : QMobile A290
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1

[Read Ok] : preloader_s5201ap.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / s5201ap / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 952 MiB
Scatter saved to : C:\Users\Marhaba_Lab\
MT6572__QMobile__QMobile_A290__QMobile_A290__4.4.2__ALPS.KK1.MP7.V1
preloader_s5201ap.bin 97.5Kb

All done!
Download Here

 

[Saif Ullah]

Qmobile M95 V2 sp7731gea_hd Firmware / flash file Android V: 4.4.3

scx35_sp7731gea_hd
sp7731gea_hd
Device Brand : QMobile
Device Model : scx35_sp7731gea_hd
Device CPU : sp7731gea_hd
Device IntName : scx35_sp7731geaplus_hd_dt
Device Version : 4.4.3
Device Compile : 20/11/2015 10:53:30
Device Project : KOT49H 14B_test-keys
Device ExtInfo : QMobile M95

Download Here

bro its tasted or not

 

[Jamil Mobile]

bro its tasted or not

10000% Tasted

 

[Yasir Gsm]

Qmobile Noir W20 tested frimware????

 

[Admin]

QMobile S6 PLUS MT6580 Firmware | Flash File | Rom
Brand : QMobile
ProdName : QMobile_S6_PLUS
ProdModel : QMobile S6 PLUS
Device : QMobile_S6_PLUS
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_rgk6580.we.m

[Read Ok] : preloader_d6171_s2_qmobile.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / d6171_s2_qmobile / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2958 MiB
Scatter saved to :
MT6580__QMobile__QMobile_S6_PLUS__QMobile_S6_PLUS__6.0__alps-mp-m0.mp1-V2.34_rgk6580.we.m\
preloader_d6171_s2_qmobile.bin 115Kb
All done!

Download Here
Password: mobilesflashing1425

 

[Aminkhan]

I need rx77 Rivo firmware

 

[Admin]

I need rx77 Rivo firmware

Wrong section always post in right section for batter support

 

[Ahsan.raza447]

Qmobile i6 metal one dead after flashing
here is some info. help please

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507332A1A05237B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507332A1A05237B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x40241CD6D27A731F69F5CCF04188944D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done Erased/damaged phone?

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

 

[Aminkhan]

I need the following firmware. urgent plz

Device Brand : alps
Device Model : l4801
Device CPU : MT6735
Device IntName : L4801AE
Device Version : 5.1
Device Compile : 5/22/2015 7:32:34 AM
Device Project : ALPS.L1.MP3.V1_TINNO6735M.65U.L
Device ExtInfo : l4801

 

[shahid mehmood]

QMobile Bolt T200 SP7731GEA firmware need

 

[Jamil Mobile]

QMobile Bolt T200 SP7731GEA firmware need

SP7731GEA_QMobile-T200_4.4.3_QMobileT200_MP_11_04 By jamil mobile
Download

 

[arshad matti]

Q mobile X2i 3g after flash dead any ok firmware please

 

[malikahmad1]

Q mobile X2i 3g after flash dead any ok firmware please

QMobile-X2i 3g~~~~~~~~~~~~~~~ : Download

 

[Kashi Lucky]

Qmobile i6 metal one dead after flashing
here is some info. help please

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507332A1A05237B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507332A1A05237B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x40241CD6D27A731F69F5CCF04188944D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done Erased/damaged phone?

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

CHeck Phone Back Side Steaker,, Check Qmobile I6 Metal One ( V1 Or V2 )

 

[arshad matti]

QMobile-X2i 3g~~~~~~~~~~~~~~~ : Download

thanks