★★ Post Here All Successful Stories By Infinity-Box CM/CM2- ★★

[Akhtar Ali Jatt]

Qmobile i8

Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:52

 

[Akhtar Ali Jatt]

QMobile i5i 2019


Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Qmobile : QMobile i5i 2019
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30

 

[Deepesh Sharma]

vivo Y91c Restart Problem Solved

 

[Akhtar Ali Jatt]

VgoTel Venture V12 F.R.p Reset Done



Operation : Reset Settings/Format FS [ v2.09 ]
Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM329)
MODE : PRELOADER PORT
PORT : 329
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 150100464536324D4203BFA3D446115F
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203BFA3D446C45F
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : EFCE4DA0A061B62BE51FFA9B8ED9EE63

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!

 

[Deepesh Sharma]

Lyf 211s Flash Done

 

[Akhtar Ali Jatt]

Nokia K18 Format Done


Operation : Read Flash [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

Platform Version: MOCOR_16A.W17.43.4_Release
Project Version: SC6531EFM_E23
MMI Version: SC6531EFM_E23_S007_V08_22122017_1954
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
2017-12-22 19:54:31
LOG Version: V1.0.1
Saved to : C:\Users\AkhtarAli\Desktop\SC6531EFM_E23_S007_V08_ 22122017_1954.bin

Done!
Elapsed: 00:00:42

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.06 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v2.0 (c)2019
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1D9 55FCE45EE_NVM.nv

Executing FormatFFS ...
Format FFS Done!

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

 

[Akhtar Ali Jatt]

Tecno B1F F.R.p Reset Done

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM216)
MODE : PRELOADER PORT
PORT : 216
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : TECNO : LB6 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_SWSEC.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D3236453CC903429B665707
DAInf: 4 : 2 : 156
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

EMMC: 150100464536324D4203C93C757669B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B832CF6AAE569DE5DC73A2E723F5CFC8

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

 

[Akhtar Ali Jatt]

QMobile i5i 2018 Format Done


Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Qmobile : QMobile i5i 2018
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:30

 

[Akhtar Ali Jatt]

Meizu M611H Format Done


Operation : Reset Settings/Format FS [ v2.09 ]
Mode : FULL FACTORY ( FORCED + FRP )

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

Waiting for device connection ...

PTFN : PreLoader USB VCOM Port (COM20)
MODE : PRELOADER PORT
PORT : 20
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode : SBC+SLA+SDA
BROM : PRELOADER PORT
MODE : Meizu : M3s_M5n_U10 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 150100514531334D420D6A99D25D14CD
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE13MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3A3E00000 [ 14.56 GB ]

CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

RNID : FEFBF4709A6EBF4BFEF3CA804457A972

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : PRIVACY
Format Ok : USERDATA

Done!
Elapsed: 00:01:16

Reconnect Power/Cable!

 

[Akhtar Ali Jatt]

QMobile Q Infinity B Format FS / Reset Settings Done


Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Qmobile : QMobile Q Infinity B
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:45

 

[Akhtar Ali Jatt]

VNUS Sun S20 Format Done


Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : VNUS : Sun S20
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:39

 

[Akhtar Ali Jatt]

Qmobile i6 Metal One Format Done


Operation : Format FS / Reset Settings [ v2.04 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Qmobile : QMobile i6 Metal ONE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:00:41

 

[mustafa_thora]

is there any support for kaios?

 

[Deepesh Sharma]

Lyf F211s Stuck On Logo Solved

Please login to view image

 

[gsmfazal]

Q Mobile HD Plush SC9850x_Base (Model Type) SC9850_eMMC_1GB_RS ...
IMEI Repair Failed.... Why ???? Where i Am making mistake or CM2 not support IMEI repair for this model ?

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 355300000000000
IMEI[2] : 355300000000000
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4


New SecInfo :
IMEI[1] : 35782xxxxxxxxxxx
IMEI[2] : 3548xxxxxxxxxxxx

NVMng : Failed to update NV!
ERROR : 000000AC:AC000000FF537E00
GEN : UNKNOWN RESPONSE!


Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

 

[Ngoclamgsm]

Infinix Hot 4 Lite Reset Privacy Lock Done​

Please login to view image

Please login to view image

 

[skyrio]

SeaShark MX1 SP7731G Read Flash Done | PAC Firmware

Phone found! [ 103 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : MX1
Model Brand : Seashark
Model Device: MX1
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : AD198_A_BP306_Seashark_MX1_Battery12_V1.0_20180925
Model Ext : MX1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1890 MiB
Saved to : SP7731CEB_MX1_6.0_AD198_A_BP306_Seashark_MX1_Battery12_V1.0_20180925_MX1
Done!

need this firmware. kindly share this

 

[nizam0022]

LG D686 DEAD AFTER FLASH RECOVER HANDSET SUCCESSFULLY ALIVE BY Dr.Research-Center-Team

View attachment 8773

View attachment 8774

Please login to view image

Please login to view image

Please login to view image

Please login to view image

Please login to view image

NEED THIS FIRMWARE PLEASE

 

[Infinity-Box]

SPD models unlocked with Infinity CM2SP2 for today

Models tested standalone - free, no need server:
Blu C4
Bmobile AX1077+
Bmobile AX1078
Bold T5+
Bolt (Blu) T5 T0040TT sc9832e
Bolt (Blu) T5 T0050TT 2sim Tigo sc9832e
Bolt (Blu) T5+ T0060TT 2sim Tigo sc9832e
Bolt (Blu) T5+ T0070TT 1sim Tigo sc9832e
GoMobile 1452
Hisense U963
IMO Q2+
Itel A23s
Mobicel Pulse-1
Mobicel Rio SS
Mobicel Ruby
Mobicel Star
Movitel M8416
Safariom Neon Ray Pro
Tecno RB6S (SU335)
Tecno SA2S
Tigo T-Smart 4G sp9820e


Models tested via server:
Digicel DL3
Itel A14
Hisense U963 HLTE100E
Hisense U963 HLTE100E ANdroid 10 (change RS to SS in settings before process)
Hisense U40
Android 10
Itel A23R [Itel A23 Jio]
Mobicel Beam
Mobicel Glo
Mobicel Rio SS
N-C1 TA-1165
Safaricom Neon Ray
Tecno SC7S
Vodacom Kicka-4-VE
ZTE Blade L130
ZTE Blade A3 2019
ZTE Aspire A3 2019
ZTE Aspire A5
ZTE A3 2020 Claro

 

[dj007]

Micromax BHARAT5 Infinity (Q4204) FACTORY FILE READ BY CM2MT2

Please login to view image