★★ Post Here All Successful Stories By Infinity-Box CM/CM2- ★★

[niloy2007]

LAVA A97 IPS

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys

-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !


PMTManager : Load 0x19 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Update NVM image : nvitem_l.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sharkl_cp1.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Write CodeData : l__WPH_arm7.bin
Write Data ...
Write Data Ok!

Write CodeData : PM_arm7_sys.bin
Write Data ...
Write Data Ok!

Write CodeData : logo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ...
Write Data Ok!

Write CodeData : wcn_fdl.bin
Write Data ...
Write Data Ok!

Write CodeData : AA_MARLIN.bin
Write Data ...
Write Data Ok!

Write CodeData : boot.img
Write Data ...
Write Data Ok!

Write FSImage : system.img
Write Data ...
Write Data Ok!

Erase Block : PERSIST
Erase block ...
Block erase Ok!

Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!

Write FSImage : cache.img
Write Data ...
Write Data Ok!

Write CodeData : recovery.img
Write Data ...
Write Data Ok!

Erase Block : MISC
Erase block ...
Block erase Ok!

Write FSImage : userdata.img
Write Data ...
Write Data Ok!


Elapsed: 00:07:26

Reconnect Power/Cable!

Finish at : [8/5/2019 / 6:57:04 PM]

 

[niloy2007]

SAMSUNG

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ÿ`Boot Ok
CPU ID : 6530 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0019 0000
[0] Flash VEN : GigaDevice , GD25LQ256
[0] Flash CAP : 02000000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:02:22

Reconnect Power/Cable!

 

[niloy2007]

Start at : [8/6/2019 / 4:41:15 PM]
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ÿ`Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:19

Reconnect Power/Cable!

Finish at : [8/6/2019 / 4:41:34 PM]

 

[niloy2007]

Start at : [8/10/2019 / 2:39:57 PM]
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys

-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001624F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:49

Reconnect Power/Cable!

Finish at : [8/10/2019 / 2:40:46 PM]

 

[niloy2007]

tart at : [8/13/2019 / 8:54:41 PM]
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ÿ`Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

Finish at : [8/13/2019 / 8:55:04 PM]

 

[niloy2007]

Start at : [8/16/2019 / 12:48:09 PM]
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 10 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ÿ`Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:27

Reconnect Power/Cable!

Finish at : [8/16/2019 / 12:48:37 PM]

 

[niloy2007]

Infinity-Box Android Service Tool [AST] v1.03
MOTOROLA
Operation : Reset Settings [ v1.03 ]
Mode : Format FS
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:17

 

[niloy2007]

NOKIA 3.1 PLUS TA-1118 (WORLD FAST)

Operation : Reset Settings [ v1.18 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone

- > Info : Press and hold BOTH volume keys, if device boot fail at BROM stage!

Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : DSLevel : DEV_KEY+DEV_ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : 601E12667ED569D6A121523F30320570470BBBB984BEBABAEFD19F623135E3DB
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6765
AGENT : Nokia DownloadAgent ver.07220419 BEST2
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100474436424D4201E8A79A9C95A3
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 1E47032D0AA199FB5484C71C302FAC0

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:38

Reconnect Power/Cable!

 

[niloy2007]

Infinity-Box Android Service Tool [AST] v1.03

Operation : Reset Settings [ v1.03 ]
Mode : Format FS
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:16

 

[niloy2007]

Operation : Reset FRP [ v1.03 ]
Mode : Remove QLM GENERIC FRP
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
FRP Erase Ok!

Done!
Elapsed: 00:00:16

 

[niloy2007]

Operation : Reset Settings [ v1.03 ]
Mode : Format FS
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:32

 

[niloy2007]

Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1550
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1550
Setting ADB ...
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1550
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!

Done!
Elapsed: 00:01:36

 

[niloy2007]

Operation : Identify [ v1.03 ]
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Main Info ============
CPU : MSM8952
CID : 0x0032
IMEI : 351891082313997
UID : 8A31DD0100000000000000000000

Model Info ============
DevModel : XT1643
IntName : athene_16mp

SW Info ============
DevSWVer : Blur_Version.25.236.3.athene.retail.en.US
DevQCVer : LA.BR.1.3.6-01710-8976.0
BaseBand : M8952_70030.25.03.62.02R ATHENE_INDIA_DSDS_CUST
BootLDRv : moto-msm8952-B1.07

HW Info ============
eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B

Lock Info ============
WarrantyVoid : no
FRP Lock : protected (77)

Done!
Elapsed: 00:00:15

Operation : Reset Settings [ v1.03 ]
Mode : Format FS
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Block [1] ERASE OK!
Block [2] ERASE OK!

Done!
Elapsed: 00:00:19

 

[niloy2007]

Operation : Flash [ v1.03 ]
FlashFile : C:\Users\Niloy\Desktop\MOTO XT1022\XT1022_CONDOR_RETAILDSDS_5.1_LPC23.13-34.2_cid7_CFC.xml.zip
Selected NormalFlash mode definition!
Pre-Flash verification passed!
Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!
Processing Flashing ...

READ INFO : MAX-SPARSE-SIZE
Result : 268435456

Executing OEM operation
OEM operation OK!

FLASH : PARTITION
Unpack file, please wait ...
FileInfo : gpt.bin , Checksum : 86a73274d21230be9c62a0349e20650b
Sending data ...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Flashing primary GPT image...
Flashing backup GPT image...
FLASH operation OK!

FLASH : MOTOBOOT
Unpack file, please wait ...
FileInfo : motoboot.img , Checksum : 50fa4c2ef75bc4f8238d22ab176b9183
Sending data ...
flashing tz ...
flashing rpm ...
flashing sdi ...
flashing aboot ...
flashing sbl1 ...
FLASH operation OK!

FLASH : LOGO
Unpack file, please wait ...
FileInfo : logo.bin , Checksum : 1c958756245ce98d8809d9950dfb919f
Sending data ...
FLASH operation OK!

FLASH : BOOT
Unpack file, please wait ...
FileInfo : boot.img , Checksum : 43adea9765ca93622143c0b81028a193
Sending data ...
FLASH operation OK!

FLASH : RECOVERY
Unpack file, please wait ...
FileInfo : recovery.img , Checksum : 8b3cf5223fb4863b32a984cda75cf5c4
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.0 , Checksum : 4d8447aa7c4508436b2dd68929443340
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.1 , Checksum : 09282ca7c49dc900fbc65432ba85d3ba
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.2 , Checksum : c193c62052f3f6f9a3071579d2dfb503
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.3 , Checksum : 96013b42b72d3e2b94d0b84c2f84b0aa
Sending data ...
FLASH operation OK!

FLASH : MODEM
Unpack file, please wait ...
FileInfo : NON-HLOS.bin , Checksum : 593067b9026c623aecdb86a4fcf3ad22
Sending data ...
FLASH operation OK!

ERASE : MODEMST1
ERASE operation OK!

ERASE : MODEMST2
ERASE operation OK!

FLASH : FSG
Unpack file, please wait ...
FileInfo : fsg.mbn , Checksum : 212c6a2e416fe9beea03bde059985d50
Sending data ...
FLASH operation OK!

ERASE : CACHE
ERASE operation OK!

ERASE : USERDATA
ERASE operation OK!

Executing OEM operation
OEM operation OK!

Flashing finished!

Done!
Elapsed: 00:05:34

 

[niloy2007]

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1643
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1643
Setting ADB ...
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1643
Setting ADB ...

1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!

Done!
Elapsed: 00:01:25

 

[niloy2007]

FLASH : PARTITION
Unpack file, please wait ...
FileInfo : gpt.bin , Checksum : d321e387d4cbbfe6573cf7e29cd4fb94
Sending data ...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Flashing primary GPT image...
Flashing backup GPT image...
FLASH operation OK!

FLASH : MOTOBOOT
Unpack file, please wait ...
FileInfo : motoboot.img , Checksum : 10f89c00e21cb851cca3209aa27735cb
Sending data ...
flashing tz ...
flashing rpm ...
flashing sdi ...
flashing aboot ...
flashing sbl1 ...
FLASH operation OK!

FLASH : LOGO
Unpack file, please wait ...
FileInfo : logo.bin , Checksum : 430c86260d74d74baaba53c57ad80f18
Sending data ...
FLASH operation OK!

FLASH : BOOT
Unpack file, please wait ...
FileInfo : boot.img , Checksum : 208b1233fa072d290697ce4f5cb60b4b
Sending data ...
FLASH operation OK!

FLASH : RECOVERY
Unpack file, please wait ...
FileInfo : recovery.img , Checksum : aa633688d1f8cf3f91af0e43cf55e491
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.0 , Checksum : 6012930f10d62481e1a9ad368d4f3fe8
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.1 , Checksum : 31af16c307678dd3c79ae55cbf29a43b
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.2 , Checksum : d6afbf924b557a479b81e834cfde1c26
Sending data ...
FLASH operation OK!

FLASH : SYSTEM
Unpack file, please wait ...
FileInfo : system.img_sparsechunk.3 , Checksum : b661d829a335d17d6a8075d2d10e0d59
Sending data ...
FLASH operation OK!

FLASH : MODEM
Unpack file, please wait ...
FileInfo : NON-HLOS.bin , Checksum : ba71051e80fea44b1b4282feecda8178
Sending data ...
FLASH operation OK!

ERASE : MODEMST1
ERASE operation OK!

ERASE : MODEMST2
ERASE operation OK!

FLASH : FSG
Unpack file, please wait ...
FileInfo : fsg.mbn , Checksum : 01b1c4e1ec3fc043541d93fa9c1d8fa9
Sending data ...
FLASH operation OK!

Executing OEM operation
OEM operation OK!

Flashing finished!

Done!
Elapsed: 00:04:55

 

[niloy2007]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 10FA5ECBBB3E0F5CCE9FCC987EBB1F20
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Read Security data ...
Verify Security data ...

Set IMEI [0] : 911556050150217
Set IMEI [1] : 911556051094711

Repair
Repair done!
[Info] : Make "Format/Reset Settings" procedure before start phone!

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

 

[niloy2007]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 10FA5ECBBB3E0F5CCE9FCC987EBB1F20
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00300000
SDS_INFO : 0x002FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00287000-0x002FDFFF , LEN : 0x00077000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Done!
Elapsed: 00:00:14

 

[niloy2007]

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333145A9640D4233ADB5AA
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x80000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420D64A9AAB56433
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xD5575D40BF11F5F301DD072AB7CFF724
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:22

 

[niloy2007]

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 21 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333145A9640D4233ADB5AA
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x80000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM31E
[eMMC] : FLASH_CID : 150100514531334D420D64A9AAB56433
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xD5575D40BF11F5F301DD072AB7CFF724
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:01:03