huawei MAR-LX1M MAR-L21MEA 9.1.0.325(C461E4R1P5)

[ten_sev]

I wanted to bypass the Huawei FRP by flashing but the phone is blocked on Erecovery I have given its same flash its no longer starts please help me

 

[perata]

hi
The problem with cust.ap file. Choose the file corresponding to the phone model and try
Any firmware you write the firmware link

 

[ten_sev]

how do i get the right cust.app

 

[perata]

how do i get the right cust.app

The file is included with the flash file
Often there are two or three files that choose the same phone model

 

[Franky38]

how do i get the right cust.app

Good sir, put the huawei in fastboot mode and read the information of the phone to know what firmware you have to download.

1. The huawei does not enter upgrade mode, not even forcing it?
2. The huawei can only be put into fastboot mode?
3. If you can, go into erecovery mode and try to download the recovery firmware of that model from huawei if it doesn't give you an error.

 

[ten_sev]

plz how to bypass frp huawei

Device Model: MAR-LX1M

Device Firmware: :MAR-L21MEA 9.1.0.325(C461E4R1P5)

Device FB Lock: LOCKED

Device USER Lock: LOCKED

 

[ten_sev]

flash done but the phone still won't start

 

[perata]

go to erecovery mode and conect phone to wifi and Log in to update & try

 

[Franky38]

plz how to bypass frp huawei

Device Model: MAR-LX1M

Device Firmware: :MAR-L21MEA 9.1.0.325(C461E4R1P5)

Device FB Lock: LOCKED

Device USER Lock: LOCKED

Good, from the screenshots I have seen that you have access to eft files, you download this firmware and tell if it has returned to normal or not.
MAR-LX1M 9.1.0.325(C461)

 

[ten_sev]

I have already downloaded this sheet
Marie-L21MEA 9.1.0.325(C461E4R1P5)_Firmware_EMUI9.1.0_05015SRS
update_sd_base
update_sd_preload_MAR-L21MEA_hw_cea_R1
update_sd_cust_MAR-L21MEA_hw_cea

 

[Franky38]

I have already downloaded this sheet
Marie-L21MEA 9.1.0.325(C461E4R1P5)_Firmware_EMUI9.1.0_05015SRS
update_sd_base
update_sd_preload_MAR-L21MEA_hw_cea_R1
update_sd_cust_MAR-L21MEA_hw_cea

Good again sir, with the firmware you have downloaded and you have put screenshots and it has given you an error, because it is not the correct firmware, download the firmware that I have put in the previous post and when you are not sure, copy the dload folder on a sd card or otg with a pendrive and the huawei will never brike, it will give software failure, but it will not be brickered.