samsung g532g repogram ufi ok but not go downlode mood..

[mohd irfan khan]

flashing aftar sestem file failed power on only kise update mood ufi repogram read dump 64mb factroy reset erage emmc then write dump 64mb ok write user area ok but not downlode mood .....

halp any soluson ufi teme.....
ufi log.................
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Factory erase... Done
Reseting PART_CONFIG... Done
Reseting BOOT_BUS_CONDITIONS... Done
moviNAND Factory Reset... Done
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3009
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Erasing boot1 data... Done in 0.005 s
Current partition access:
Access to boot partition 2
Erasing boot2 data... Done in 0.004 s
Current partition access:
Access to user area
Erasing userarea data... Done in 0.031 s
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3009
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Current partition access:
Access to boot partition 1
Writing random bytes to boot1, sector: 0... Done in 0.004 s
Verifying... Done in 0.003 s, content verified successfully.
Writing random bytes to boot1, sector: 5738... Done in 0.004 s
Verifying... Done in 0.003 s, content verified successfully.
Current partition access:
Access to user area
Writing random bytes to userarea, sector: 0... Done in 0.003 s
Verifying... Done in 0.004 s, content verified successfully.
Writing random bytes to userarea, sector: 9121808... Done in 0.003 s
Verifying... Done in 0.003 s, content verified successfully.

CC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\PrimaryGPT.img", size: 4 MiB...
Writing PrimaryGPT at 0x00000000-0x003FFFFF (8192 sectors)... Done in 1.660 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\nvram.img", size: 8 MiB...
Writing nvram at 0x00800000-0x00FFFFFF (16384 sectors)... Done in 3.313 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\EFS.img", size: 8 MiB...
Writing EFS at 0x02800000-0x02FFFFFF (16384 sectors)... Done in 3.309 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\nvdata.img", size: 32 MiB...
Writing nvdata at 0x03000000-0x04FFFFFF (65536 sectors)... Done in 13.243 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\proinfo.img", size: 2.50 MiB...
Writing proinfo at 0x0A780000-0x0A9FFFFF (5120 sectors)... Done in 1.032 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\PERSISTENT.img", size: 512 KiB...
Writing PERSISTENT at 0x0AA80000-0x0AAFFFFF (1024 sectors)... Done in 0.217 s
Loading file: "\\%BACKUPS%\samsung\SM-G532G(MMB29T.G532GDXU1AQC1-6.0.1-MMB29T)[QN16BB_D7FAE406]\user_part\cache.img", size: 400 MiB...
Writing cache at 0xCC800000-0xE57FFFFF (819200 sectors)... cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer sta
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Internal storage: 3.63 GiB
crypto state: unencrypted
Selected: [SAMSUNG] KMQN10006M-B318/8GB+LPDDR3 12Gb (BGA221)

 

[vishal3008N]

u removed emmc or working with isp.

 

[mohd irfan khan]

isp pin .......

 

[ShohagMalik]

Try to write tested dump or factory file with pit. If phone not power on then reball emmc

 

[mohd irfan khan]

factory file write pit bootlodar done but ap file write failed.......

 

[Ngoclamgsm]

factory file write pit bootlodar done but ap file write failed.......

Hello, Please Check "Health + Smart report" and post steps picture worked with ufi box here.
Only write file Pit and BL Firmware in Tab Factory Image.
Use cable Samsung download mode activated.
If you are user new ufi box. Please watch Complete UFI Box Training Lesson installation And Features https://www.martview-forum.com/threads/19918/
Good Luck To You

 

[mohd irfan khan]

helt report

CC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 50% - 60% device life time used
Estimation of the device lifetime (MLC): 50% - 60% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).
Connection status: EHCI:HUB:USB 2.00 High-Speed

 

[Ngoclamgsm]

helt report

CC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0xA564DC0C
Manufacturing date: Jan 2017
CID: 15010051 4E313642 4200A564 DC0C1456
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 50% - 60% device life time used
Estimation of the device lifetime (MLC): 50% - 60% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).
Connection status: EHCI:HUB:USB 2.00 High-Speed

EMMC Device lifetime: 50% - 60% device life time used
But You try use version UFI_v1.4.0.1464 and you try steps guide:

1. Write dump EXT_CSD, Boot1, boot2, User area
2. Write Partition Imei backup
3. Write Only file Pit and BL Firmware in Tab Factory Image
4. Use cable Samsung download mode activated.
5. Flash Full Firmware in Download mode to Success.

If Phone not active. Please replace emmc new.
Good luck to you

 

[mohd irfan khan]

thank u this info but iam all raddy many dade phone alive ufi box first time this phone reporgram not work so u r good info emmc chang thank u.......