Legitunlocks.com
Martview RB-02

Help Redmi 6A dead

T

totovgn

Junior Member
Jun 2, 2020
4
1
Uruguay
Hello, I have a redmi 6A that tries to downgrade the miui version from 11.0.8.0 to 10 and now it does not power, it only vibrates and in the operations log it does not show the "android system info". What would be the correct steps to unbrick this phone? I have the backup but I load it and it still does not show the "android system info". I am new with this box

First log:

Please "Identify eMMC" at first, before any other operation.
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x0819D87D
Manufacturing date: Nov. 2018
CID: 90014A48 41473461 32A50819 D87DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\HAG4a2_0819D87D.ext_csd"
ANDROID System Info:
platform: MT6765, cpu abi: armeabi-v7a
manufacturer: Xiaomi
board: cactus, name: cactus
brand: xiaomi, model: Redmi 6A
build model list: Redmi 6A
build id: PPR1.180610.011, version: 9 Pie (SW_S98506AE1_V009_M13_XM_C3C_USR)
build description: cactus-user 9 PPR1.180610.011 V11.0.8.0.PCBMIXM release-keys
crypto state: encrypted?
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Last log after downgrade:

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-1395
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x0819D87D
Manufacturing date: Nov. 2018
CID: 90014A48 41473461 32A50819 D87DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)
 
T

totovgn

Junior Member
Jun 2, 2020
4
1
Uruguay
Ngoclamgsm said:
Hello, You can try write file backup with UFI_v1.4.0.1464 .
Good luck to you
Click to expand...
I just tried that but it's still the same. Does not show android system info

here log:

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x0819D87D
Manufacturing date: Nov. 2018
CID: 90014A48 41473461 32A50819 D87DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
crypto state: encrypted?
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)
 
A

ashaqkulgam

Active Member
Jan 28, 2020
58
17
totovgn said:
I just tried that but it's still the same. Does not show android system info

here log:

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number:
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x0819D87D
Manufacturing date: Nov. 2018
CID: 90014A48 41473461 32A50819 D87DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
crypto state: encrypted?
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)
Click to expand...
Use ufi box old version
 
  • Like
Reactions: totovgn and Ngoclamgsm
T

totovgn

Junior Member
Jun 2, 2020
4
1
Uruguay
Ngoclamgsm said:
please post picture process work with ufi box here. I can help you.
If you are user new ufi box. Please watch Complete UFI Box Training Lesson installation And Features https://www.martview-forum.com/threads/19918/
Good luck to you.
Click to expand...


I already saw all the training videos. I follow the guides of some of them but I'm not lucky. If I load the operating system directly to the emmc from the "factory image" tab, the phone should turn on? I have tried different versions (miui 11, miui 10) and it doesn't power on
 
Ngoclamgsm

Ngoclamgsm

Product Supporter
Nov 11, 2018
1,516
1,374
VietNam
Skype
[email protected]
Sonork ID
0
totovgn said:
I already saw all the training videos. I follow the guides of some of them but I'm not lucky. If I load the operating system directly to the emmc from the "factory image" tab, the phone should turn on? I have tried different versions (miui 11, miui 10) and it doesn't power on
Click to expand...
You load the operating system directly to the emmc from the "factory image" tab and factory reset in the ufi emmc, the phone turn on if you show firmware version in the ufi and compatible your phone.
 
  • Like
Reactions: totovgn
You must log in or register to reply here.
Top