Getting This error In Vivo U10

[CHANDRA PRAKSH]

Getting This error In Vivo U10

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7004
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DD68MB (0x444436384d42), rev: 0x02, serial number: 0x3A29C838
Manufacturing date: Jun 2019
CID: 15010044 4436384D 42023A29 C83866A8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Failed to read EXT_CSD !!!

 

[vishal3008N]

Getting This error In Vivo U10

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7004
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DD68MB (0x444436384d42), rev: 0x02, serial number: 0x3A29C838
Manufacturing date: Jun 2019
CID: 15010044 4436384D 42023A29 C83866A8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Failed to read EXT_CSD !!!

Use short wire for isp &make sure isp wires sholded properly on motherboard.

 

[CHANDRA PRAKSH]

already using short wire

 

[sham9031]

i am also getting this error

 

[aftab_ansari5287]

Getting This error In Vivo U10

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-7004
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DD68MB (0x444436384d42), rev: 0x02, serial number: 0x3A29C838
Manufacturing date: Jun 2019
CID: 15010044 4436384D 42023A29 C83866A8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Failed to read EXT_CSD !!!

ISP PINOUT CONNECTION NOT SOLD PROPERLY

RESOLD HUMPER AGAIN

_______BEST_________________REGARDS
_______PRESS_________THE__________LIKE___________________BUTTON

FOR MORE INFO CONTACT ON TELEGRAM тнє ѕмαℓℓ ρяιи¢є

 

[ABDUL123trfm1u3ehs]

Vivo u10 pattern unlock umt Emmc hardwer tool by sd card reader isp pinout