Help Failed to initialize eMMC (return code: 226, Over current detected) !!!

[karm12345]

When I bought the box it worked with me well
Suddenly this message appeared to me
Please help

 

[karm12345]

Me (15:41): Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!

 

[mohd irfan khan]

your jumpar sort ..............

 

[Ahmadaim1]

Don't make long jumper ensure you do good soldering
Try to attach usb in the phone port

Sent from my Redmi Note 8 Pro using Tapatalk

 

[karm12345]

I checked all connections
But the same problem
Can you help me

 

[Madgoeslim]

View attachment 8626

When I bought the box it worked with me well
Suddenly this message appeared to me
Please help

Hello,
Are this error happen only in ISP?
How about using emmc adapter, are you experience the same error?

 

[karm12345]

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... VCC, VCCQ, CLK, CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!


using emmc adapter

 

[karm12345]

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!
Check your connection, make sure eMMC inserted properly.

 

[Ak Bhandare]

Always vcc&vccq set auto mode. remove vcc&vccq jumper and use usb charger ..
2nd time post with full details with model& proccess for better help.

 

[karm12345]

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!
Check your connection, make sure eMMC inserted properly.

 

[karm12345]

using emmc adapter

Always vcc&vccq set auto mode. remove vcc&vccq jumper and use usb charger ..
2nd time post with full details with model& proccess for better help.

using emmc adapter

Please login to view image

 

[Ak Bhandare]

post your handset condition and problem
cheak jumper properly. and alwayes use small wire for jumper..

 

[karm12345]

https://www.martview-forum.com/attachments/whatsapp-image-2019-12-30-at-3-32-55-pm-1-jpg.9395/

post your handset condition and problem
cheak jumper properly. and alwayes use small wire for jumper..

no jumper i used emmc adapter
The problem in both cases
isp or emmc adapter

 

[Ak Bhandare]

if you use emmc adapter so untick direct isp option and detect again ...

 

[karm12345]

if you use emmc adapter so untick direct isp option and detect again ...

Please login to view image

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4208
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 224, Short circuit detected) !!!
Check your connection, make sure eMMC inserted properly.

 

[pdubs92]

I think in start you give voltage (vcc, vccq) from USB connection as well as from isp so at that time your box get internal shortin and now box damaged from internal circuit this is your mistake sir
note : always follow proper instructions and use all tools in proper way don't do any kind of operation which can damage your tool or your phones devices

 

[karm12345]

I think in start you give voltage (vcc, vccq) from USB connection as well as from isp so at that time your box get internal shortin and now box damaged from internal circuit this is your mistake sir
note : always follow proper instructions and use all tools in proper way don't do any kind of operation which can damage your tool or your phones devices

How can the box be repaired?

 

[karm12345]

What is the way to fix the box if there is a problem?

 

[moji-r]

View attachment 8626

When I bought the box it worked with me well
Suddenly this message appeared to me
Please help

Has your problem been solved? I have the same problem

 

[Muhammad asad]

same problem plz help