Help oppo A1k dead after wipe user data and remove frp

recan21

Active Member
Aug 2, 2019
88
21
Code:
Selected eMMC Interface
Z3X EasyJtag Software ver. 3.6.1.15
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707071F24C202D1, ,FW Ver.: 01.63
CMD Pullup Level:2010 mV
CMD Active Level:2660 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514436334D4203464BD8E01682
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019  Rev.0x3
eMMC NAME: QD63MB , S/N: 1179375840
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data)   Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 568 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
  Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits  , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
 Device support partitioning feature
 Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200  bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x01BB800000 (22.132GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x01A0800000 (432.0MB)
Erasing...
Done.
---------------------------------------------
Done.
help !
 

msibashankar

Product Supporter
Sep 27, 2017
348
1,562
india
PayPal:

Donate money to this user
https://www.martview-forum.com/thre...ter-clear-fail-solve-by-ssm.17878/#post-51173
REALME C2 DEAD RECOVERY OPPO A1K DEAD RECOVERY AND MASTER CLEAR FAIL SOLVE BY SSM

REALME C2 DEAD RECOVERY OPPO A1K DEAD RECOVERY AND MASTER CLEAR FAIL SOLVE BY SSM



DUMP FILE LINK
OPPO A1K DUMP FILE - OPPO A1K DUMP FILE
Pass-SSM-A1K
REALME C2 DUMP FILE- REALME C2 DUMP FILE
Pass-SSM-C2
Code:
Selected eMMC Interface
Z3X EasyJtag Software ver. 3.6.1.15
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707071F24C202D1, ,FW Ver.: 01.63
CMD Pullup Level:2010 mV
CMD Active Level:2660 mV
Box IO Level:2800 mV
CLK Rate:14000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514436334D4203464BD8E01682
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 01/2019 Rev.0x3
eMMC NAME: QD63MB , S/N: 1179375840
eMMC NAME (HEX): 514436334D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 568 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x02 , width 8bits , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x01BB800000 (22.132GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x01A0800000 (432.0MB)
Erasing...
Done.
---------------------------------------------
Done.
help !

Sent From [friends-mobile by (ssm)] Using Martview Forum App
 
  • Like
Reactions: griffn

romdevelopers

Friend's Martview
Nov 22, 2016
258
49
BD


OPPO A1K DUMP FILE DEAD BOOT REPAIR WITHOUT JTAG USB ONLY AUTO RECOVERY FIX​



Download Not Complete After Flash | Without UFI & Easy jTAG Box | Offline Work| Auto Recovery Restart Fix
No Need Flash After Write This Dump File



Download Here


 
Top