Post Here SucessFully Story Repair Your Handset With Easy-Jtag Plus

[diesel6]

Coolpad 8297l-100 dead recover done with remove emmc and programming

 

[diesel6]

Htc 516w dead recover done with emmc change
Skhynix to samsung

 

[diesel6]

J100h dead recover done by change emmc

 

[diesel6]

G6000 daed recover done

 

[Deepesh Sharma]

Intex Aqua Power 4G Stuck On android Recovered Done
Emmc Repair Only

Image

Log

Successfully Alive SEt

Please login to view image

 

[Deepesh Sharma]

Itel It-1409 Dead Recover+Emmc Change+Ram Upgrade 512Mb To 1GB Successfully
Itel 1409 Dead REcover Change Emmc Kingstone To SkHynix Ram Upgrade 512MB To 1GB

Image-1

Please login to view image

Easy-Jtag Log

Please login to view image

Set Alive Successfully

Please login to view image

Ram Upgrade 512Mb To 1Gb

Please login to view image

 

[Deepesh Sharma]

Micromax Q440 Stuck on logo solved emmc reprogram With Easy Jtag
Image

Please login to view image

Log

Please login to view image

Set SuccessFully Alive

Please login to view image

 

[waqas_ali6012003]

T310 dead emmc changed B503

Please login to view image

Please login to view image

 

[sarfrazhusain]

Micromax Q413 Dead After Format With CM2 Recover Done With Easy Jtag



Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_195832.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: proinfo, [000000080000 - 000000380000], size: 000000300000 (3.00 MB)
Partition: nvram, [000000380000 - 000000880000], size: 000000500000 (5.00 MB)
Partition: protect1, [000000880000 - 000001280000], size: 000000A00000 (10.0 MB)
Partition: protect2, [000001280000 - 000001C80000], size: 000000A00000 (10.0 MB)
Partition: lk, [000001C80000 - 000001D00000], size: 000000080000 (512. KB)
Partition: para, [000001D00000 - 000001D80000], size: 000000080000 (512. KB)
Partition: boot, [000001D80000 - 000002D80000], size: 000001000000 (16.0 MB)
Partition: recovery, [000002D80000 - 000003D80000], size: 000001000000 (16.0 MB)
Partition: logo, [000003D80000 - 000004580000], size: 000000800000 (8.00 MB)
Partition: expdb, [000004580000 - 000004F80000], size: 000000A00000 (10.0 MB)
Partition: seccfg, [000004F80000 - 000005000000], size: 000000080000 (512. KB)
Partition: oemkeystore, [000005000000 - 000005200000], size: 000000200000 (2.00 MB)
Partition: secro, [000005200000 - 000005800000], size: 000000600000 (6.00 MB)
Partition: keystore, [000005800000 - 000006000000], size: 000000800000 (8.00 MB)
Partition: tee1, [000006000000 - 000006500000], size: 000000500000 (5.00 MB)
Partition: tee2, [000006500000 - 000006A00000], size: 000000500000 (5.00 MB)
Partition: frp, [000006A00000 - 000006B00000], size: 000000100000 (1.00 MB)
Partition: nvdata, [000006B00000 - 000008B00000], size: 000002000000 (32.0 MB)
Partition: metadata, [000008B00000 - 00000B000000], size: 000002500000 (37.0 MB)
Partition: system, [00000B000000 - 00008B000000], size: 000080000000 (2.00 GB)
Partition: cache, [00008B000000 - 000093000000], size: 000008000000 (128. MB)
Partition: userdata, [000093000000 - 0003A2D80000], size: 00030FD80000 (12.2 GB)
Partition: flashinfo, [0003A2D80000 - 0003A3D80000], size: 000001000000 (16.0 MB)
GPT header successfully parsed

Get firmware version

Firmware info not found

Operation: Preloader parser

preloader_p7511.bin
Found 4 supported eMMC CID:
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
eNAND_H26M52103FMR/16GB @FBGA169
eNAND_H9TQ17A8GTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17A8GTMCUR-KUM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KUM/16GB @BGA221
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
KMQ820013M-B419/16GB @BGA221
name = '016G70' hex = 0x303136473730 [TOSHIBA]
eSD_THGBMFG7C1LBAIL/16GB @FBGA153
name = 'Q72SMB' hex = 0x513732534D42 [SAMSUNG]
KMQ72000SM-B316/8GB @BGA221+LPDDR3 8Gb

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_195946.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: proinfo, [000000080000 - 000000380000], size: 000000300000 (3.00 MB)
Partition: nvram, [000000380000 - 000000880000], size: 000000500000 (5.00 MB)
Partition: protect1, [000000880000 - 000001280000], size: 000000A00000 (10.0 MB)
Partition: protect2, [000001280000 - 000001C80000], size: 000000A00000 (10.0 MB)
Partition: lk, [000001C80000 - 000001D00000], size: 000000080000 (512. KB)
Partition: para, [000001D00000 - 000001D80000], size: 000000080000 (512. KB)
Partition: boot, [000001D80000 - 000002D80000], size: 000001000000 (16.0 MB)
Partition: recovery, [000002D80000 - 000003D80000], size: 000001000000 (16.0 MB)
Partition: logo, [000003D80000 - 000004580000], size: 000000800000 (8.00 MB)
Partition: expdb, [000004580000 - 000004F80000], size: 000000A00000 (10.0 MB)
Partition: seccfg, [000004F80000 - 000005000000], size: 000000080000 (512. KB)
Partition: oemkeystore, [000005000000 - 000005200000], size: 000000200000 (2.00 MB)
Partition: secro, [000005200000 - 000005800000], size: 000000600000 (6.00 MB)
Partition: keystore, [000005800000 - 000006000000], size: 000000800000 (8.00 MB)
Partition: tee1, [000006000000 - 000006500000], size: 000000500000 (5.00 MB)
Partition: tee2, [000006500000 - 000006A00000], size: 000000500000 (5.00 MB)
Partition: frp, [000006A00000 - 000006B00000], size: 000000100000 (1.00 MB)
Partition: nvdata, [000006B00000 - 000008B00000], size: 000002000000 (32.0 MB)
Partition: metadata, [000008B00000 - 00000B000000], size: 000002500000 (37.0 MB)
Partition: system, [00000B000000 - 00008B000000], size: 000080000000 (2.00 GB)
Partition: cache, [00008B000000 - 000093000000], size: 000008000000 (128. MB)
Partition: userdata, [000093000000 - 0003A2D80000], size: 00030FD80000 (12.2 GB)
Partition: flashinfo, [0003A2D80000 - 0003A3D80000], size: 000001000000 (16.0 MB)
GPT header successfully parsed

Get firmware version

Firmware info not found

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_195956.extcsd
EMMC Init completed.

Opening file: MT6735M_Android_scatter.txt

The new format of scatter
config_version: V1.1.2
platform: MT6735M
preloader_p7511.bin
Found 4 supported eMMC CID:
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
eNAND_H26M52103FMR/16GB @FBGA169
eNAND_H9TQ17A8GTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17A8GTMCUR-KUM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KUM/16GB @BGA221
name = 'Q823MB' hex = 0x513832334D42 [SAMSUNG]
KMQ820013M-B419/16GB @BGA221
name = '016G70' hex = 0x303136473730 [TOSHIBA]
eSD_THGBMFG7C1LBAIL/16GB @FBGA153
name = 'Q72SMB' hex = 0x513732534D42 [SAMSUNG]
KMQ72000SM-B316/8GB @BGA221+LPDDR3 8Gb

The size of the last section has been updated

Operation: Preloader parser

preloader_top6735m_35gu_l1.bin
Found 3 supported eMMC CID:
name = 'R31BAB' hex = 0x523331424142 [SAMSUNG]
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
eNAND_H26M52103FMR/16GB @FBGA169
eNAND_H9TQ17A8GTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17A8GTMCUR-KUM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KUM/16GB @BGA221
name = 'RE1BMB' hex = 0x524531424D42 [SAMSUNG]

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_200113.extcsd
EMMC Init completed.

Opening file: MT6735M_Android_scatter.txt

The new format of scatter
config_version: V1.1.2
platform: MT6735M
preloader_top6735m_35gu_l1.bin
Found 3 supported eMMC CID:
name = 'R31BAB' hex = 0x523331424142 [SAMSUNG]
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
eNAND_H26M52103FMR/16GB @FBGA169
eNAND_H9TQ17A8GTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17A8GTMCUR-KUM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KTM/16GB @BGA221
eNAND_H9TQ17ABJTMCUR-KUM/16GB @BGA221
name = 'RE1BMB' hex = 0x524531424D42 [SAMSUNG]

The size of the last section has been updated

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_200123.extcsd
EMMC Init completed.

Operation: Write by vendor (MediaTek)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0003A3DFBE00
GPT-partitioning done

Partition name: preloader
Filename: preloader_top6735m_35gu_l1.bin , Offset: 000000000000 , filesize: 124376 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 1494.59 KB/s
Partition name: lk
Filename: lk.bin , Offset: 000001C80000 , filesize: 415186 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 5116.36 KB/s
Partition name: boot
Filename: boot.img , Offset: 000001D80000 , filesize: 7073792 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 10484.50 KB/s
Partition name: recovery
Filename: recovery.img , Offset: 000002D80000 , filesize: 7811072 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 19297.58 KB/s
Partition name: logo
Filename: logo.bin , Offset: 000003D80000 , filesize: 1292810 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 12599.11 KB/s
Partition name: secro
Filename: secro.img , Offset: 000005200000 , filesize: 135168 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 4225.20 KB/s
Partition name: tee1
Filename: trustzone.bin , Offset: 000006000000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3878.59 KB/s
Partition name: tee2
Filename: trustzone.bin , Offset: 000006500000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3754.97 KB/s
Partition name: system
Filename: system.img , Offset: 00000B000000 , filesize: 2112320076 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 2436
Done writing partition. Write speed: 17803.44 KB/s
Partition name: cache
Filename: cache.img , Offset: 0000AB000000 , filesize: 6348948 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 10
Done writing partition. Write speed: 19297.69 KB/s
Partition name: userdata
Filename: userdata.img , Offset: 0000B3000000 , filesize: 20808176 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 39
Done writing partition. Write speed: 15871.71 KB/s

Writing DL_Info...
Writing DL_Info done

Writing eMMC Register ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01

All done time: [00:02:35:703]

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 150100524531424D4207B415C6B56357
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: B415C6B5 , rev. 0x07
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 6/2016
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_B415C6B5_20190705_200446.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: proinfo, [000000080000 - 000000380000], size: 000000300000 (3.00 MB)
Partition: nvram, [000000380000 - 000000880000], size: 000000500000 (5.00 MB)
Partition: protect1, [000000880000 - 000001280000], size: 000000A00000 (10.0 MB)
Partition: protect2, [000001280000 - 000001C80000], size: 000000A00000 (10.0 MB)
Partition: lk, [000001C80000 - 000001D00000], size: 000000080000 (512. KB)
Partition: para, [000001D00000 - 000001D80000], size: 000000080000 (512. KB)
Partition: boot, [000001D80000 - 000002D80000], size: 000001000000 (16.0 MB)
Partition: recovery, [000002D80000 - 000003D80000], size: 000001000000 (16.0 MB)
Partition: logo, [000003D80000 - 000004580000], size: 000000800000 (8.00 MB)
Partition: expdb, [000004580000 - 000004F80000], size: 000000A00000 (10.0 MB)
Partition: seccfg, [000004F80000 - 000005000000], size: 000000080000 (512. KB)
Partition: oemkeystore, [000005000000 - 000005200000], size: 000000200000 (2.00 MB)
Partition: secro, [000005200000 - 000005800000], size: 000000600000 (6.00 MB)
Partition: keystore, [000005800000 - 000006000000], size: 000000800000 (8.00 MB)
Partition: tee1, [000006000000 - 000006500000], size: 000000500000 (5.00 MB)
Partition: tee2, [000006500000 - 000006A00000], size: 000000500000 (5.00 MB)
Partition: frp, [000006A00000 - 000006B00000], size: 000000100000 (1.00 MB)
Partition: nvdata, [000006B00000 - 000008B00000], size: 000002000000 (32.0 MB)
Partition: metadata, [000008B00000 - 00000B000000], size: 000002500000 (37.0 MB)
Partition: system, [00000B000000 - 0000AB000000], size: 0000A0000000 (2.50 GB)
Partition: cache, [0000AB000000 - 0000B3000000], size: 000008000000 (128. MB)
Partition: userdata, [0000B3000000 - 0003A2D7BE00], size: 0002EFD7BE00 (11.7 GB)
Partition: flashinfo, [0003A2D7BE00 - 0003A3D7BE00], size: 000001000000 (16.0 MB)
GPT header successfully parsed

Get firmware version

Brand = Micromax
Manufacturer = Micromax
Device = Q413
Model = Micromax Q413
Phone platform = mt6735m
CPU Abi = armeabi-v7a
Mediatek platform = MT6735
Android release = 5.1
Firmware version = MMX_Q413_SW_V2.0.6_HW_V2.0.0_20160401
Firmware date = Thu Mar 10 03:19:30 CST 2016



WBR
Sarfraz Husain

 

[waqas_ali6012003]

G532G DEAD AFTER FLASH RECOVERD

Please login to view image

 

[ferouzkassim]

another oppo a3s done wipe userdata and clear frp very fast in seconds and jobdone

Checking security ...
Z3X EasyJtag Software ver. 3.6.1.2
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: 417A1E88471829FA, ,FW Ver.: 02.44
CMD Pullup Level:2120 mV
CMD Active Level:2685 mV
Box IO Level:2800 mV
CLK Rate:1000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203AE34DEA48523
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 2922700452
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 16175 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
------ Android information ------
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB)
Erasing...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB)
Erasing...
Done.
---------------------------------------------
Done.

Checking security ...
Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.6.1.2
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: 417A1E88471829FA, ,FW Ver.: 02.44
CMD Pullup Level:2121 mV
CMD Active Level:2684 mV
Box IO Level:2800 mV
CLK Rate:1000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203AE34DEA48523
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 2922700452
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 16175 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB) , formatting...
Done.
Detected LINUX(Android) CONFIG : 0x002FC80000 (32.0KB) formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB) , formatting...
Done.
Done.
Done.

 

[ferouzkassim]

ANOTHER OPO A3S DONE

Z3X EasyJtag Software ver. 3.6.1.2
Loading eMMC GEN2 Firmware... IO: 2800 mV
Box S/N: 417A1E88471829FA, ,FW Ver.: 02.44
Warning: CMD Pullup Level (343 mV) too low , check cables etc.!
CMD Active Level:2662 mV
Box IO Level:2800 mV
CLK Rate:1000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D42060704D3ADA55D
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 10/2018 Rev.0x6
eMMC NAME: QE63MB , S/N: 117756845
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 70189 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: QE63MB_ 117756845_20190730_1300.extcsd
=============================================
Extended CSD rev 1.8 (MMC 5.1)
=============================================
Card Supported Command sets [S_CMD_SET: 0x01]
HPI Features [HPI_FEATURE: 0x01]:
implementation based on CMD13
Background operations support [BKOPS_SUPPORT: 0x01]
Max Packet Read Cmd [MAX_PACKED_READS: 0x3f]
Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f]
Data TAG support [DATA_TAG_SUPPORT: 0x01]
Data TAG Unit Size [TAG_UNIT_SIZE: 0x02]
Tag Resources Size [TAG_RES_SIZE: 0x00]
Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05]
Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07]
Extended partition attribute support [EXT_SUPPORT: 0x03]
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a]
Power off notification [POWER_OFF_LONG_TIME: 0x3c]
Cache Size [CACHE_SIZE] is 65536 KiB
------------------------- eMMC v5+ -------------------------
Supported modes [SUPPORTED_MODES: 0x03]
FFU features [FFU_FEATURES: 0x00]
Operation codes timeout [OPERATION_CODE_TIMEOUT: 0x00]
FFU Argument [FFU_ARG: 0xc7810000]
Number of FW sectors correctly programmed[NUM_OF_FW_SECT_CORR_PROG: 0]
Vendor proprietary health report:
[VENDOR_PROPRIETARY_HEALTH_REPORT[301]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[300]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[299]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[298]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[297]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[296]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[295]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[294]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[293]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[292]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[291]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[290]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[289]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[288]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[287]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[286]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[285]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[284]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[283]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[282]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[281]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[280]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[279]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[278]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[277]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[276]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[275]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[274]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[273]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[272]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[271]]:0x00
[VENDOR_PROPRIETARY_HEALTH_REPORT[270]]:0x00
_(Device life time estimation type B [DEVICE_LIFE_TIME_EST_TYP_B: 0x01]
i.e. 0% - 10% device life time used
_(Device life time estimation type B [DEVICE_LIFE_TIME_EST_TYP_A: 0x01]
i.e. 0% - 10% device life time used
Pre EOL information [PRE_EOL_INFO: 0x01]
i.e. Normal

Optimal read size [OPTIMAL_READ_SIZE: 0x00]
Optimal write size [OPTIMAL_WRITE_SIZE: 0x08]
Optimal trim unit size [OPTIMAL_TRIM_UNIT_SIZE: 0x01]
Device version [DEVICE_VERSION: 0x00 - 0x00]
Firmware version:
[FIRMWARE_VERSION[261]]: 0x00
[FIRMWARE_VERSION[260]]: 0x00
[FIRMWARE_VERSION[259]]: 0x00
[FIRMWARE_VERSION[258]]: 0x00
[FIRMWARE_VERSION[257]]: 0x00
[FIRMWARE_VERSION[256]]: 0x00
[FIRMWARE_VERSION[255]]: 0x00
[FIRMWARE_VERSION[254]]: 0x06
Power class for 200MHz, DDR at VCC= 3.6V [PWR_CL_DDR_200_360: 0x00]
-------------------------------------------------------------
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a]
Power off notification [POWER_OFF_LONG_TIME: 0x3c]
Cache Size [CACHE_SIZE] is 65536 KiB
Background operations status [BKOPS_STATUS: 0x00]
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e]
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]
Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00]
Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00]
Minimum Performance for 8bit at 52MHz in DDR mode:
[MIN_PERF_DDR_W_8_52: 0x00]
[MIN_PERF_DDR_R_8_52: 0x00]
TRIM Multiplier [TRIM_MULT: 0x02]
Secure Feature support [SEC_FEATURE_SUPPORT: 0x55]
Boot Information [BOOT_INFO: 0x07]
Device supports alternative boot method
Device supports dual data rate during boot
Device supports high speed timing during boot
Boot partition size [BOOT_SIZE_MULTI: 0x20]
Access size [ACC_SIZE: 0x07]
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]
Reliable write sector count [REL_WR_SEC_C: 0x01]
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10]
Sleep current (VCC) [S_C_VCC: 0x07]
Sleep current (VCCQ) [S_C_VCCQ: 0x07]
Sleep/awake timeout [S_A_TIMEOUT: 0x11]
Sector Count [SEC_COUNT: 0x01d1f000]
Minimum Write Performance for 8bit:
[MIN_PERF_W_8_52: 0x00]
[MIN_PERF_R_8_52: 0x00]
[MIN_PERF_W_8_26_4_52: 0x00]
[MIN_PERF_R_8_26_4_52: 0x00]
Minimum Write Performance for 4bit:
[MIN_PERF_W_4_26: 0x00]
[MIN_PERF_R_4_26: 0x00]
Power classes registers:
[PWR_CL_26_360: 0x00]
[PWR_CL_52_360: 0x00]
[PWR_CL_26_195: 0x00]
[PWR_CL_52_195: 0x00]
Partition switching timing [PARTITION_SWITCH_TIME: 0x02]
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x0a]
I/O Driver Strength [DRIVER_STRENGTH: 0x1f]
Card Type [CARD_TYPE: 0x57]
CSD structure version [CSD_STRUCTURE: 0x02]
Command set [CMD_SET: 0x00]
Command set revision [CMD_SET_REV: 0x00]
Power class [POWER_CLASS: 0x00]
High-speed interface timing [HS_TIMING: 0x00]
Erased memory content [ERASED_MEM_CONT: 0x00]
Boot configuration bytes [PARTITION_CONFIG: 0x38]
No access to boot partition
Boot config protection [BOOT_CONFIG_PROT: 0x00]
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]
High-density erase group definition [ERASE_GROUP_DEF: 0x00]
Boot write protection status registers [BOOT_WP_STATUS]: 0x00
Boot Area Write protection [BOOT_WP]: 0x00
Power ReadOnly locking: possible
Permanent ReadOnly locking: possible
Read Only lock status: not locked
User area write protection register [USER_WP]: 0x00
FW configuration [FW_CONFIG]: 0x00
RPMB Size [RPMB_SIZE_MULT]: 0x20
Write reliability setting register [WR_REL_SET]: 0x1f
Write reliability parameter register [WR_REL_PARAM]: 0x14
Enable background operations handshake [BKOPS_EN]: 0x02
H/W reset function [RST_N_FUNCTION]: 0x01
HPI management [HPI_MGMT]: 0x00
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0003a3
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
General Purpose Partition Size [GP_SIZE_MULT_4]: 0x000000
[GP_SIZE_MULT_3]: 0x000000
[GP_SIZE_MULT_2]: 0x000000
[GP_SIZE_MULT_1]: 0x000000
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
Periodic Wake-up [PERIODIC_WAKEUP]: 0x00
Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01
Native sector size [NATIVE_SECTOR_SIZE]: 0x00
Sector size emulation [USE_NATIVE_SECTOR]: 0x00
Sector size [DATA_SECTOR_SIZE]: 0x00
1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00
Class 6 commands control [CLASS_6_CTRL]: 0x00
Number of addressed group to be released[DYNCAP_NEEDED]: 0x00
Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000
Exception events status [EXCEPTION_EVENTS_STATUS]: 0x0000
Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000
Packed command status [PACKED_COMMAND_STATUS]: 0x00
Packed command failure index [PACKED_FAILURE_INDEX]: 0x00
Power Off Notification [POWER_OFF_NOTIFICATION]: 0x00
Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x00
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
Found Data areas (firmware parts) count is: 65
---------------------------------------------
P0 (OPPODYCNVBK) [0x5000 0xa00000] Size: 10.0MB
P1 (OPPOSTANVBK) [0xa05000 0xa00000] Size: 10.0MB
P2 (MODEMST1) [0x1405000 0x180000] Size: 1.500MB
P3 (MODEMST2) [0x1585000 0x180000] Size: 1.500MB
P4 (PERSIST) [0x1705000 0x2000000] Size: 32.0MB
P5 (OPPORESERVE1) [0x3705000 0x800000] Size: 8.0MB
P6 (OPPORESERVE2) [0x3f05000 0x4000000] Size: 64.0MB
P7 (RESERVE_EXP1) [0x7f05000 0x200000] Size: 2.0MB
P8 (RESERVE_EXP2) [0x8105000 0x200000] Size: 2.0MB
P9 (FSC) [0x8305000 0x400] Size: 1.0KB
P10 (SSD) [0x8306000 0x2000] Size: 8.0KB
P11 (SBL1) [0x8308000 0x80000] Size: 512.0KB
P12 (RPM) [0x8388000 0x80000] Size: 512.0KB
P13 (TZ) [0x8408000 0x200000] Size: 2.0MB
P14 (DEVCFG) [0x8608000 0x40000] Size: 256.0KB
P15 (SBL1BAK) [0x8648000 0x80000] Size: 512.0KB
P16 (RPMBAK) [0x86c8000 0x80000] Size: 512.0KB
P17 (TZBAK) [0x8748000 0x200000] Size: 2.0MB
P18 (DEVCFGBAK) [0x8948000 0x40000] Size: 256.0KB
P19 (DSP) [0x8988000 0x1000000] Size: 16.0MB
P20 (DDR) [0xa000000 0x8000] Size: 32.0KB
P21 (FSG) [0xa008000 0x180000] Size: 1.500MB
P22 (SEC) [0xa188000 0x4000] Size: 16.0KB
P23 (ABOOT) [0xa18c000 0x100000] Size: 1.0MB
P24 (ABOOTBAK) [0xa28c000 0x100000] Size: 1.0MB
P25 (MODEM) [0xa38c000 0x8000000] Size: 128.0MB
P26 (DTBO) [0x1238c000 0x800000] Size: 8.0MB
P27 (VBMETA) [0x12b8c000 0x10000] Size: 64.0KB
P28 (BOOT) [0x12b9c000 0x4000000] Size: 64.0MB
P29 (RECOVERY) [0x16b9c000 0x4000000] Size: 64.0MB
P30 (DEVINFO) [0x1ab9c000 0x100000] Size: 1.0MB
P31 (SPLASH) [0x1b000000 0xb00000] Size: 11.0MB
P32 (LOGO) [0x1bb00000 0x2000000] Size: 32.0MB
P33 (DRIVER) [0x1db00000 0x2000000] Size: 32.0MB
P34 (CACHE) [0x1fb00000 0x10000000] Size: 256.0MB
P35 (MISC) [0x2fb00000 0x100000] Size: 1.0MB
P36 (KEYSTORE) [0x2fc00000 0x80000] Size: 512.0KB
P37 (CONFIG) [0x2fc80000 0x8000] Size: 32.0KB
P38 (OEM) [0x2fc88000 0x100000] Size: 1.0MB
P39 (LIMITS) [0x30000000 0x8000] Size: 32.0KB
P40 (MOTA) [0x30800000 0x80000] Size: 512.0KB
P41 (DIP) [0x30880000 0x100000] Size: 1.0MB
P42 (MDTP) [0x30980000 0x2000000] Size: 32.0MB
P43 (SYSCFG) [0x32980000 0x80000] Size: 512.0KB
P44 (MCFG) [0x32a00000 0x400000] Size: 4.0MB
P45 (LKSECAPP) [0x33000000 0x20000] Size: 128.0KB
P46 (CMNLIB) [0x33020000 0x100000] Size: 1.0MB
P47 (CMNLIB64) [0x33120000 0x100000] Size: 1.0MB
P48 (KEYMASTER) [0x33220000 0x100000] Size: 1.0MB
P49 (LKSECAPPBAK) [0x33320000 0x20000] Size: 128.0KB
P50 (CMNLIBBAK) [0x33340000 0x100000] Size: 1.0MB
P51 (CMNLIB64BAK) [0x33440000 0x100000] Size: 1.0MB
P52 (KEYMASTERBAK) [0x33540000 0x100000] Size: 1.0MB
P53 (APDP) [0x33800000 0x40000] Size: 256.0KB
P54 (MSADP) [0x33840000 0x40000] Size: 256.0KB
P55 (DPO) [0x33880000 0x2000] Size: 8.0KB
P56 (LOGDUMP) [0x33882000 0x4000000] Size: 64.0MB
P57 (VM-KYSTORE) [0x37882000 0x100000] Size: 1.0MB
P58 (VM-DATA) [0x37982000 0xa00000] Size: 10.0MB
P59 (HYP) [0x38800000 0x800000] Size: 8.0MB
P60 (VM-SYSTEM) [0x39000000 0x4000000] Size: 64.0MB
P61 (VM-LINUX) [0x3d000000 0x2000000] Size: 32.0MB
P62 (SYSTEM) [0x3f000000 0xd6900000] Size: 3.352GB
P63 (VENDOR) [0x115900000 0x41f60000] Size: 1.30GB
P64 (USERDATA) [0x158000000 0x24bdfbe00] Size: 9.184GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
Build ID: OPM1.171019.026
Release Base ID: 8.1.0
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190323.213841 release-keys
---------------------------------------------
Detected USERDATA USERDATA : 0x0158000000 (9.184GB)
Unable to mount USERDATA , code : 95
Done.

Selected eMMC Interface


---------- eMMC Device Information ----------

eMMC CID : 150100514536334D42060704D3ADA55D
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 10/2018 Rev.0x6
eMMC NAME: QE63MB , S/N: 117756845
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 70189 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
------ Android information ------
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB)
Erasing...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB)
Erasing...
Done.
---------------------------------------------
Done.





---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB) , formatting...
Done.
Detected LINUX(Android) CONFIG : 0x002FC80000 (32.0KB) formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB) , formatting...
Done.
Done.
Done.

 

[Deepesh Sharma]

Realme C2 Rmx 1945 Remove USer LockOffline Done
Log

Please login to view image

Phone Image

Please login to view image

 

[Deepesh Sharma]

Oppo A1K (CPH1923) Remove User Lock/Frp Lock Successfully Done By Easy Jtag
Image

Please login to view image

Remove User lock

Please login to view image

Remove Frp lock

Please login to view image

Successfully Removed all locks

Please login to view image

 

[ferouzkassim]

SAMSUNG G532F BOOT REPAIR DONE


eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (64 bit) build 7600 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = 417A1E88471829FA
Card Serial = AAF96E71
EasyJTAG Box Firmware = 2.44

Changelog:

30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report

Failed to connect to the server

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 1 MHz
CMD Pullup Level: 2806 mV
CMD Active Level: 2800 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C38364F935E3
EMMC CSD: D02701320F5903FFFFFFFFE78A40002B
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: C38364F9 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_C38364F9_20190809_143622.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: BOTA0, [000000400000 - 000000800000], size: 000000400000 (4.00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8.00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2.00 MB)
Partition: BOTA1, [000001200000 - 000001400000], size: 000000200000 (2.00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7.00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512. KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512. KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6.00 MB)
Partition: BOTA2, [000002200000 - 000002800000], size: 000000600000 (6.00 MB)
Partition: EFS, [000002800000 - 000003000000], size: 000000800000 (8.00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32.0 MB)
Partition: PARAM, [000005000000 - 000005800000], size: 000000800000 (8.00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16.0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16.0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32.0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4.00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8.00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3.50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2.50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512. KB)
Partition: PERSISTENT, [00000AA80000 - 00000AB00000], size: 000000080000 (512. KB)
Partition: STEADY, [00000AB00000 - 00000AC00000], size: 000000100000 (1.00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8.00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8.00 MB)
Partition: RESERVE2, [00000BC00000 - 00000C000000], size: 000000400000 (4.00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3.01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400. MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60.0 MB)
Partition: userdata, [0000E9400000 - 0001D1C00000], size: 0000E8800000 (3.63 GB)
GPT header successfully parsed

Get firmware version

Brand = samsung
Manufacturer = samsung
Device = grandpplte
Model = SM-G532F
Phone platform = mt6737t
CPU Abi = armeabi-v7a
Mediatek platform = MT6737T
Android release = 6.0.1
Firmware version = MMB29T.G532FXWU1APJ1
Firmware date = Sat Oct 1 18:25:42 KST 2016

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 1 MHz
CMD Pullup Level: 3283 mV
CMD Active Level: 2843 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C38364F935E3
EMMC CSD: D02701320F5903FFFFFFFFE78A40002B
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: C38364F9 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_C38364F9_20190809_153546.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: BOTA0, [000000400000 - 000000800000], size: 000000400000 (4.00 MB)
Partition: NVRAM, [000000800000 - 000001000000], size: 000000800000 (8.00 MB)
Partition: LK, [000001000000 - 000001200000], size: 000000200000 (2.00 MB)
Partition: BOTA1, [000001200000 - 000001400000], size: 000000200000 (2.00 MB)
Partition: SECRO, [000001400000 - 000001B00000], size: 000000700000 (7.00 MB)
Partition: SECCFG, [000001B00000 - 000001B80000], size: 000000080000 (512. KB)
Partition: EFUSE, [000001B80000 - 000001C00000], size: 000000080000 (512. KB)
Partition: TEE1, [000001C00000 - 000002200000], size: 000000600000 (6.00 MB)
Partition: BOTA2, [000002200000 - 000002800000], size: 000000600000 (6.00 MB)
Partition: EFS, [000002800000 - 000003000000], size: 000000800000 (8.00 MB)
Partition: NVDATA, [000003000000 - 000005000000], size: 000002000000 (32.0 MB)
Partition: PARAM, [000005000000 - 000005800000], size: 000000800000 (8.00 MB)
Partition: RECOVERY, [000005800000 - 000006800000], size: 000001000000 (16.0 MB)
Partition: BOOT, [000006800000 - 000007800000], size: 000001000000 (16.0 MB)
Partition: MD1IMG, [000007800000 - 000009800000], size: 000002000000 (32.0 MB)
Partition: MD1DSP, [000009800000 - 000009C00000], size: 000000400000 (4.00 MB)
Partition: KEYSTORE, [000009C00000 - 00000A400000], size: 000000800000 (8.00 MB)
Partition: OMEKEYSTORE, [00000A400000 - 00000A780000], size: 000000380000 (3.50 MB)
Partition: PROINFO, [00000A780000 - 00000AA00000], size: 000000280000 (2.50 MB)
Partition: PARA, [00000AA00000 - 00000AA80000], size: 000000080000 (512. KB)
Partition: PERSISTENT, [00000AA80000 - 00000AB00000], size: 000000080000 (512. KB)
Partition: STEADY, [00000AB00000 - 00000AC00000], size: 000000100000 (1.00 MB)
Partition: PROTECT1, [00000AC00000 - 00000B400000], size: 000000800000 (8.00 MB)
Partition: PROTECT2, [00000B400000 - 00000BC00000], size: 000000800000 (8.00 MB)
Partition: RESERVE2, [00000BC00000 - 00000C000000], size: 000000400000 (4.00 MB)
Partition: SYSTEM, [00000C000000 - 0000CC800000], size: 0000C0800000 (3.01 GB)
Partition: CACHE, [0000CC800000 - 0000E5800000], size: 000019000000 (400. MB)
Partition: HIDDEN, [0000E5800000 - 0000E9400000], size: 000003C00000 (60.0 MB)
Partition: USERDATA, [0000E9400000 - 0001D1FFBE00], size: 0000E8BFBE00 (3.64 GB)
GPT header successfully parsed

Get firmware version

Firmware info not found

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 1 MHz
CMD Pullup Level: 3284 mV
CMD Active Level: 2844 mV
EMMC Device Information :
EMMC CID: 90014A48384734759201C38364F935E3
EMMC CSD: D02701320F5903FFFFFFFFE78A40002B
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: C38364F9 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_C38364F9_20190809_153604.extcsd
EMMC Init completed.

Operation: Writing all eMMC Regions...

Operation: Writing BootConfig ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
Done

Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 59.72 KB/s

Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: EMMC_QN16BB_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 59.82 KB/s

Writing to: ROM1 , start: 0x000000000000 , size: 0x00000C000000
Filename: EMMC_QN16BB_ROM1_000000000000_00000C000000.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 119.75 KB/s

All done time: [00:29:41:413]

 

[phuongmobilex]

samsung a50(a505)............frp done ,read dump..........v.....v...............and more!!

Please login to view image

Please login to view image

Please login to view image

 

[phuongmobilex]

remove frp a50 ufs done by jtag plus

Please login to view image

Please login to view image

Please login to view image

 

[phuongmobilex]

Infor first for solution replace ufs new by jtag plus!! Mr phương>>>

Please login to view image

Please login to view image

 

[Deepesh Sharma]

Oppo A1K Cph 1923 Dead By Other Technician During Frp Lock
Successfully Alive Handset By Write Dump And With Easy Jtag Plus
Log-1

Please login to view image

Log-2

Please login to view image

Set Alive Sussessfully

Please login to view image

Factory Flash

Please login to view image

After All Process Handset Working Fine

Please login to view image

Thank To Kamal_Singla For Dump Test Report

 

[md anwar alam]

Dump file link plz