Legitunlocks.com
Martview MS-2D 2D Screwdriver

Solved Oppo A1k CPH1923 Passcode Remove And Factory Reset Without Flash

This topic has been solved
Abdullah

Abdullah

Friend's Martview
Oct 22, 2016
1,421
4,067
Pakistan
PayPal:

Donate money to this user
Oppo A1k CPH1923 Passcode Remove And Factory Reset With UFi Box Complete Guide


 
  • Like
  • Love
Reactions: raz14322, anyasumon, technical kashif and 25 others
a2zworld

a2zworld

Member
Jul 29, 2017
9
2
gsm
Skype
chinazone1
Connection status: AMDHUB30:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5095
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x8066CEA1
Manufacturing date: Jan 2019
CID: 15010051 4436334D 42038066 CEA11618
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6762_18540, name:
brand: , model:
build id: PPR1.180610.011, version: 9 Pie ()
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190418.193311 release-keys

crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G




try to

Factory Reset...
Creating filesystem... Done.
Writing cache... Wrote 80170784 blocks, expected to write 110592 blocks
Done.
Creating filesystem... Done.
Writing userdata... Unknown chunk type 0x0000 at 0x00E0A0C4
Wrote 50103502 blocks, expected to write 5802235 blocks
Done.
Done.
modal = oppo A1k password not resat
 
  • Like
Reactions: Naushad alam
C

celltronix bala

Member
Nov 13, 2018
7
0
Skype
[email protected]
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-0630
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x24620690
Manufacturing date: May 2019
CID: 15010051 4536334D 42032462 069056D8
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\QE63MB_24620690.ext_csd"

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name:
brand: , model:
build id: PPR1.180610.011, version: 8.1.0 Oreo ()
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190517.234935 release-keys

crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)




After factory reset mobile dead..................
 
C

celltronix bala

Member
Nov 13, 2018
7
0
Skype
[email protected]
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DMB (0x444836444d42), rev: 0x05, serial number: 0x7C3C6A26
Manufacturing date: Nov 2017
CID: 15010044 4836444D 42057C3C 6A26B464
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6771, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6771_17331, name: CPH1811
brand: OPPO, model: CPH1811(A73)
build id: O11019, version: 8.1.0 Oreo (CPH1811EX_11_A.30_190420)
build description: full_oppo6771_17331-user 8.1.0 O11019 1555777454 release-keys

Internal storage: 51.35 GiB
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMDH6000DM-BXXX/64G






After factory reset mobile dead..................model oppo f7
 
Dr.sunilsingh

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
402
823
india
Skype
[email protected]
Sonork ID
1681209
Last edited:
  • Like
Reactions: XURSAND, waseem ashraf, pankaj m yadav and 1 other person
1

174877s

Member
Aug 10, 2018
5
0
India
restart after prosses
Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Wrote 70593713 blocks, expected to write 110592 blocks
Done.
Creating filesystem with parameters:
Size: 23765954560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8160
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 5802235
Block groups: 178
Reserved block group size: 1024
Created filesystem with 11/1452480 inodes and 135204/5802235 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0A0C4
Wrote 50411142 blocks, expected to write 5802235 blocks
Done.
Done.
 
You must log in or register to reply here.
Top