Legitunlocks.com
IC Chip

oppo f9 dead after special task with ufi box

L

lamran

Junior Member
Aug 18, 2017
4
1
conakry
Skype
Lamran.barry
Sonork ID
100.1585201
hi bro
receive oppo f9 usercode but after do special task
now phone not on
can anyone help

Interface: UFI High-Speed
Serial number: 0011-8840-9468
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0xC13194E5
Manufacturing date: oct. 2018
CID: 90014A68 43386150 3E03C131 94E5A5FA
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Unknown chunk type 0x0000 at 0x026100C4
Wrote 5069950 blocks, expected to write 13378811 blocks
Done.
Done.

really waiting for help
i am newbie to ufi box
 
L

lamran

Junior Member
Aug 18, 2017
4
1
conakry
Skype
Lamran.barry
Sonork ID
100.1585201
please guy can anyone help me ufi box support
i really need help
anyone have solution and any idea how to solve my pb
 
L

lamran

Junior Member
Aug 18, 2017
4
1
conakry
Skype
Lamran.barry
Sonork ID
100.1585201
please guy help me revive my phone
over 3 days no try to help me
i really need help
please guy
 
N

nour2017

Active Member
May 24, 2017
67
22
egypt
sorry to ask that sir how can read with u in isp ? put usb cable? u soldered all clk cmd vcc and vccq then gnd ? or wat
 
Neerajjmt

Neerajjmt

Blocked
Jul 13, 2019
148
132
All Members please always Be careful while making Isp pinouts Most of Clk registor short by new users so in this case if Clk short or damage there is low chances of alive a device Bcoz of Clk registor gives supply to Emmc.
Hope this clear
 
  • Like
Reactions: Tundesalami and bronce
N

nour2017

Active Member
May 24, 2017
67
22
egypt
Neerajjmt said:
All Members please always Be careful while making Isp pinouts Most of Clk registor short by new users so in this case if Clk short or damage there is low chances of alive a device Bcoz of Clk registor gives supply to Emmc.
Hope this clear
Click to expand...
in this device oppo f9 theres no resistor
 
J

jameleh

Member
Jul 15, 2017
9
4
Indonesia
lamran said:
hi bro
receive oppo f9 usercode but after do special task
now phone not on
can anyone help

Interface: UFI High-Speed
Serial number: 0011-8840-9468
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0xC13194E5
Manufacturing date: oct. 2018
CID: 90014A68 43386150 3E03C131 94E5A5FA
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Unknown chunk type 0x0000 at 0x026100C4
Wrote 5069950 blocks, expected to write 13378811 blocks
Done.
Done.

really waiting for help
i am newbie to ufi box
Click to expand...
Set manual VCCq to 2.8V
 
R

ravium

Junior Member
Sep 13, 2019
1
0
oppo cph 1823 got dead aftre using spiceal task factory reset



Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-2861
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0x8E30C4FB
Manufacturing date: Jun 2018
CID: 15010044 48364441 42028E30 C4FB6506
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Done.
Creating filesystem with parameters:
Size: 54799609856
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13378811
Block groups: 409
Reserved block group size: 1024
Created filesystem with 11/3350528 inodes and 256374/13378811 blocks
Writing userdata... Done.
Done.
 
G

Gsm_Chan

Junior Member
Sep 29, 2019
3
0
i have issue of this model my phone get restart after reset
anyone have solve this problem
 
You must log in or register to reply here.
Top