Z3X Pandora PRO 7.14 / 8.0. Released. Lot of New devices and new loaders added

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 7.14

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD07C2F71, 0xBE575296, 0x8E71EED0, 0x0F6CD03C
Get Chip ID... [MT6761]
Get SOC ID... [49ED426EE6D91144809078156D7B2FE 38EBCF19E9669821EC77F211DB0D947C2]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100525831344D4207830013914407525831344D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RX14MB
EMMC_ID : 0x1501004207830013914407
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex
Product Model : Z23
Product Name : Vortex_Z23
Product Device : Z23
Product Board : g2239fmr_v1_gi_g5a_a_ym_t
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Sun Apr 7 19:54:38 CST 2024
Display ID : Vortex_Z23_V1.0_20240407
Security Patch : 2024-04-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 2024140
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, GB2, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[Ahsan Communication]

Pandora PRO 7.14 Released. Lot of New devices and new loaders added


Added support Samsung Galaxy S25 series:

- SM-S9310 (BIT 1)
- SM-S931B (BIT 1)
- SM-S931N (BIT 1)
- SM-S931U (BIT 1)
- SM-S9360 (BIT 1)
- SM-S936B (BIT 1)
- SM-S936N (BIT 1)
- SM-S936U (BIT 1)
- SM-S9380 (BIT 1)
- SM-S938B (BIT 1)
- SM-S938N (BIT 1)
- SM-S938U (BIT 1)


Added new loader for Samsung:

- SM-A015U1 (BIT 7)
- SM-A426N (BIT 7)
- SM-A5260 (BIT B)
- SM-A528N (BIT 6)
- SM-A736B (BIT A)
- SM-A908B (BIT 9)
- SM-F916B (BIT 7)
- SM-G781N (BIT A)
- SM-G986N (BIT A)
- SM-G990B2 (BIT A)
- SM-G991U (BIT E)
- SM-G998U (BIT E)
- SM-M426B (BIT 9)
- SM-T297 (BIT 6)
- SM-T733 (BIT 8)


Added support for Unisoc based phones:

- Realme C61 RMX3930/RMX3933, Realme C63 RMX3939
- ZTE Blade A53 Plus P963F62, ZTE Blade A53 P963F62-B
- ZTE Blade A53 Pro P963F63, ZTE Blade V2022 8031



Added:

- Xiaomi MiAcc info reading

Added:
- new loaders for QCOM phones (EDL mode)


Fixed:
- QCOM Get PkHash exception
- QCOM EMMC sparse flashing BUG
- QCOM patch flashing BUG
- QCOM Xiaomi auth



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

List of resellers with stock: HERE

hey team realme c63 rmx 3939
i unlock bootloader then software is crash please fix

 

[ransiri]

Selected model: Mediatek Mediatek
Operation: Wipe Data
Software version: 7.12


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x420C483B, 0x03AC0807, 0x0814898B, 0xBC4365FA
Get Chip ID... [MT6833]
Get SOC ID... [7022FCEA02F8AK5AFDD812732FFF96B62S23AEC1F8716DB648 D78BA275E6C0F5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD6010S41334135363R126FA3E62D59EM
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A561
EMMC_ID : 0xD6010341K34135363D126FA3E62D59EM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 7540N
Product Name : P633F08_2
Product Device : P633F08
Product Board : Crabapple
Board Platform : mt6833
Build ID : RP1A.200720.011
Build Date : Wed Jun 19 16:56:04 CST 2024
Display ID : MyOS11.1.3_7540N_PJ_VDC_ZA
Security Patch : 2024-06-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20240619.162606
Userdata FS Type : F2FS
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

Please post test point

 

[GsmToto]

Selected model: Samsung SM-A326U (Samsung Galaxy A32 5G)
Operation: Wipe Partitions
Software version: 7.14


Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0996
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6853]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCDD5F58C, 0xD6466015, 0xA859201B, 0x628D1621
Get Chip ID... [MT6853]
Get SOC ID... [D992F69CE81E6D2DE578BSBAF7305A295A175B1735043EAE9A 5DFDA059EE26BS]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [15]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM5P8001DM-B424 (0002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KM5P8001DM-B424
UFS_FWVER : 0002
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x0EE5800000 (59,59Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A326U
Product Name : a32xsq
Product Device : a32x
Product Board : a32x
Board Platform : mt6853
Build ID : SP1A.210812.016
Build Date : Tue Oct 15 21:10:21 KST 2024
Display ID : TP1A.220624.014.A326USQSGMXJ2
Security Patch : 2024-10-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : A326USQSGMXJ2
Userdata FS Type : F2FS
Format "persistent" partition... OK
Format "cache" partition... OK
Format "userdata" partition... OK
Format Partitions done!

 

[GsmToto]

Selected model: Vivo PD1917F (Vivo Y90)
Operation: Erase FRP
Software version: 7.14


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5EA0820D, 0x2AD3298D, 0x2293E088, 0x526A3E33
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D420179C990AC16DM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 80% - 90% device life time used
DeviceLifeTimeEstB: 80% - 90% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1820
Product Name : PD1818HF_EX
Product Device : PD1818HF_EX
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : O11019
Build Date : Mon Oct 21 11:55:56 CST 2024
Display ID : O11019 release-keys
Security Patch : 2021-10-01
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1729482966
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1917F%20(Vivo%20Y90)/FRP_BACKUP_(2025-2-5_10-21-33)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: OPPO CPH1923 (OPPO A1K)
Operation: Repair
Software version: 7.14


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x28CFB9B2, 0x100D6BE4, 0xD24CB212, 0x310D22B6
Get Chip ID... [MT6765]
Get SOC ID... [B3E4780358F337FD5DF35BBD8E57C3B4DF5D2ECD2E7B3691A3 EA6CE6896F2D30]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D42031383AA40160M
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D42031383AA40160M
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 60% - 70% device life time used
DeviceLifeTimeEstB: 60% - 70% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH1923
Product Name : CPH1923
Product Device : OP486C
Product Board : oppo6762_18540
Board Platform : mt6765
Build ID : PPR1.180610.011
Build Date : Fri Mar 29 16:47:13 CST 2024
Display ID : CPH1923EX_11_A.42
Security Patch : 2021-05-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : 1711702281
Userdata FS Type : EXT4
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Repairing IMEI...
IMEI 1: 867867867869855
IMEI 2: 867867867869863
Write IMEI and patch CERT [NVDATA]... OK
Checking patch type... [1]
Patching CERT... OK
Save patched partiton... OK
Updating NVRAM... OK
Read security partition from phone... OK
Write security partition to phone... OK
Checking additional lock... [DISABLED]
Unlock bootloader done!
Selected "Disable VBMETA verification"
Read security partition from phone... OK
Write security partition to phone... OK
Write IMEI and patch CERT [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security and Patch cert done!
If your phone after repair keeps rebooting - use wipe data option.

 

[GsmToto]

Selected model: Infinix Mediatek
Operation: Erase FRP
Software version: 7.14


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xC897CA8C, 0xABE4294B, 0x1DD459F0, 0xC5757814
Get Chip ID... [MT6761]
Get SOC ID... [C7FD735827E8E493EA854DF65666F638634CB77FAB7DC94F18 B60375B4C63836]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010051583633414203CC8E076718BM
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QX63AB
EMMC_ID : 0x15010051583633414203CC8E076718BM
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X612B
Product Name : X612B-GL
Product Device : Infinix-X612B
Product Board : infinix_x612b
Board Platform : mt6761
Build ID : QP1A.190711.020
Build Date : Thu Nov 11 19:41:55 CST 2021
Display ID : X612B-X612BBC-QGo-GL-211111V037
Security Patch : 2021-11-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : BC-GL-211111V037
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_MT6761/FRP_BACKUP_(2025-2-6_17-33-23)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Lg K520HMW (Lg K52)
Operation: Erase FRP
Software version: 7.14

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x554FC6E9, 0x3775F192, 0x894BAF6C, 0xA7214A63
Get Chip ID... [MT6765]
Get SOC ID... [44D22E6288A9101F1F33AEE7C685B608170F73E56A958040DBB6D48527F5FC99]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501004448A903E7775364441420492C
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DH6DAB
EMMC_ID : 0x150100444A903E77758364441420492C
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-K520
Product Name : meh35lm
Product Device : meh35lm
Product Board : mt6765
Board Platform : mt6765
Build ID : SKQ1.211103.001
Build Date : Thu Aug 31 19:55:59 IST 2023
Security Patch : 2023-09-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 232432328a5f6
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Lg_K520HMW%20(Lg%20K52)/FRP_BACKUP_(2025-2-7_13-42-21)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[aliipi]

Selected model: Tecno BG7 (Tecno Spark 20C)
Operation: Erase FRP
Software version: 7.14
Work ID: 60816518

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM34 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x77F5BE26, 0x8DBC7A37, 0x2B914DF1, 0x67E214BA
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: Itel P683L (Itel P40 Plus)
Operation: Erase FRP
Software version: 7.14

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM5
Port: USB\VID_1782&PID_4D00\6&298C69D9&0&3
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: ET417L002538
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : klein
Product Name : miodm_klein_global
Product Device : klein
Product Board : klein
Board Platform : sp9863a
Build ID : TP1A.220624.014
Build Date : Thu Apr 25 08:14:24 CST 2024
Display ID : TP1A.220624.014
Security Patch : 2024-03-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.2.0.UGSMI4M
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[aliipi]

Selected model: Infinix X6525B (Infinix Smart 8 Pro)
Operation: Erase FRP And Wipe
Software version: 7.14
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 60925217

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM34 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x22BAD9F3, 0xAC4B36EB, 0xBCAC5F98, 0x7C54B844
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: Infinix X6525B (Infinix Smart 8 Pro)
Operation: Erase FRP And Wipe
Software version: 7.14
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 60925217

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM34 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x22BAD9F3, 0xAC4B36EB, 0xBCAC5F98, 0x7C54B844
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

New security. Wait for updates.

 

[GsmToto]

Selected model: Tecno KE5 (Tecno Spark 6 Go)
Operation: Erase FRP
Software version: 7.14


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA84C2686, 0x528B510A, 0x2F5EEBE2, 0x546CC10D
Get Chip ID... [MT6761]
Get SOC ID... [5978C25AEA5F1726127DAA084A2FF6AC4BCC288BE37E1621B7 093B324F54A8F1]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68423861503E03105CFD78A717
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x90014A68423861503E03105CFD78A717
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 30% - 40% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KE5
Product Name : KE5-GL
Product Device : TECNO-KE5
Product Board : TECNO-KE5
Board Platform : mt6761
Build ID : QP1A.190711.020
Build Date : Mon Aug 22 20:44:38 CST 2022
Display ID : KE5-H6123ABC-QGo-GL-220822V553
Security Patch : 2022-08-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : ABC-GL-220822V553
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KE5%20(Tecno%20Spark%206%20Go)/FRP_BACKUP_(2025-2-11_1-17-11)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Qualcomm Qualcomm
Operation: Erase FRP
Software version: 7.14


Waiting for device... OK
Device found at COM3
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 2898256403
Sahara ver: 3
OEM PK HASH: 227AF3D1E19215890093AB18C5E8F27DCEC37B7586FBF8EA55 227E1F09C79EC214AC1322B406896FACE5F7AB1053B96B
CPU: SM8650-AC (Snapdragon 8 Gen 3)
Vendor: Samsung
MSM HW ID: 002270E100200000
Prepare loader file... OK
Loader hash: 3BCAF18E27E243075B5E74BC2E457FB683F1EBBD
Loader PK hash: 227AF3D1E19215890093AB18C5E8F27DCEC37B7586FBF8EA16 227E1F09C79EC214AC7AB1053406896FACE5FB96B1322B
Loader version: 7.0
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [UFS]
Get storage info... OK
Storage info:
Type: UFS
Name: KLUDG4UHDC-B0E1
Page size: 1000
Block size: 1000
Partition count: 4
LU0 size: 0x1DB9400000
LU1 size: 0x0001000000
LU2 size: 0x0001000000
LU3 size: 0x000D400000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Serial Number : RFCX11BPQZY
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-S921U
Product Name : e1qsqw
Product Device : e1q
Product Board : pineapple
Board Platform : pineapple
Build ID : UP1A.231005.007
Build Date : Sat Nov 9 08:27:36 KST 2024
Display ID : UP1A.231005.007.S921U1UEU4AXK3
Security Patch : 2024-11-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : S921USQU4AXK3
Userdata FS Type : F2FS
Erase FRP... OK
Done

 

[GsmToto]

Selected model: TCL 6125F (TCL 20E)
Operation: Unlock network
Software version: 7.14

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2B3159CD, 0xBB381A3E, 0x8C9B4332, 0xC89BC8BB
Get Chip ID... [MT6765]
Get SOC ID... [956E65A4B7183569317B9A2A358E39DCD0DE39724372E7AADC ECB70CFBEC1E0E]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241525686A0332315813236992C
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARV21X
EMMC_ID : 0xF40122415256386A032315813236992C
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1CD0000000 (115.25Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : mssi_64_ww
Product Board : model_3
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Sun Oct 8 11:27:13 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-08-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 7GH8
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Unlock... OK [DF1, DF2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: Xiaomi Qualcomm
Operation: Reset Mi Acc
Software version: 7.14

Waiting for device... OK
Device found at COM5
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3970877844
Sahara ver: 2
OEM PK HASH:
CPU: MSM8953
Vendor: Qualcomm
MSM HW ID: 000460E100000000
SBL SW Ver: 00000000
Prepare loader file... OK
Loader hash: F10A0D7EA1E416390A5EFC30E552E70E0FB85F1C
Loader PK hash: 57158EAF1814D78FD2B3105E664A5782A9 25F3FF8403D39ACE4DB18A817A08AC
Loader version: 3.21
Sending loader... OK
FireHose initialization... OK
Bypass EDL auth... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: EMMC
Name: RH64AB
Page size: 200
Block size: 200
Partition count: 3
PART0 size: 0x0E8F800000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : xiaomi
Product Manufacturer : Xiaomi
Product Model : Redmi S2
Product Name : ysl
Product Device : ysl
Product Board : ysl
Board Platform : msm8953
Build ID : PKQ1.181203.001
Build Date : Thu Sep 24 20:47:30 WIB 2020
Display ID : PKQ1.181203.001
Security Patch : 2020-09-01
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : V12.0.2.0.PEFMIXM
Userdata FS Type : EXT4
MiAcc Find Device : Enabled
MiAcc Phone Number : +923015*****37
MiAcc E-Mail : [email protected]
Reset Mi Acc stage #1... OK
Reset Mi Acc stage #2... OK
Done!

 

[GsmToto]

Selected model: Vortex HD65 Ultra
Operation: Unlock network
Software version: 7.14

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xA638E7AF, 0xEC08AAD1, 0x7DAB4E91, 0x85B68731
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [1]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HBG4a2
EMMC_ID : 0x90014A484347346132A515303676B585
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex
Product Model : HD65_Ultra
Product Name : HD65_Ultra
Product Device : HD65_Ultra
Product Board : k39tv1_64_bsp_k419
Board Platform : mt6739
Build ID : SP1A.210812.016
Build Date : Mon Apr 22 20:06:02 CST 2024
Display ID : Vortex_HD65_Ultra_V01_04222024
Security Patch : 2024-04-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20240422
Userdata FS Type : EXT4
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[pharuk]

Selected model: OPPO CPH2579 (Oppo A38)
Operation: Read IMEI Info
Software version: 7.14
Work ID: 59577140

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM17 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x068A4E69, 0x9B78F842, 0x392C9EAA, 0xA813CD95
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

hello sir pandora team ,add new tab all android mobile read hardware key read (key json) solution add plz.

 

[aliipi]

Selected model: Tecno KJ7 (Tecno Spark 20 Pro Plus)
Operation: Enable ADB META
Software version: 7.14
Work ID: 61819305

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM26 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Waiting for device... canceled

not suppoort prelader mose

 

[GsmToto]

Selected model: Nokia TA-1412 (Nokia G21)
Operation: Erase FRP And Wipe
Software version: 7.14

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM64
Port: USB\VID_1782&PID_4D00\6&37F8BD03&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: P232227121005048
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia G21
Product Name : ShadowcatPlus_00WW
Product Device : SCP_sprout
Product Board : ShadowcatPlus
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Tue Jan 7 10:07:04 UTC 2025
Display ID : 00WW_3_530_SP15
Security Patch : 2025-01-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 00WW_3_53V
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!