Legitunlocks.com
Martview MS-3D 3D Screwdriver

Infinity infinix hot 40 pro x6837 does not support ?

Infinity Box & Dongle
carmelillo18

carmelillo18

Active Member
Jan 31, 2020
32
4
LoRiKa CiTy
Wait...
S/N: 008BD8394C v0162
CM2 - MT2 Service Tool v2.64a9 (beta)
Init log engine... Ok
Build directories tree... Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 3 dirs: 0
Verify device database... BuiltIn: 28 Custom: 0
Build device list...
Load IDBase v915508 Ok
Load 146 profiles... Ok
libusb: v1.2.7.3
Init environment... Ok
Ready
DA selected: Ibrit | Alpha-AF51 | MTK_AllInOne_DA.e0cb318f.bin | preloader_h920w_v1_p_xh_x19b_ccit_1s.bin
2 DA available, try it one-by-one
DA selected: Infinix | -soc-Dimensity-9000 | DA_BR.13372eec.bin | auth_sv5.auth
DA selected: Infinix | X6837 | DA_BR.bin | preloader_x6837_h897.bin
MTK_DA_v6_2024-01-17 23:27:52

Operation: Identify [ v2.64a9 (beta) ]
Wait...
Connection: Boot [DA] Factory
Port: Both [ B + P ]; High-Speed: On
[+] Force BROM
[-] Local SLA
[+] Auto-EMI
[-] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM56)
MODE [0]: PRELOADER PORT; PORT: 56
Waiting for BOOT ACK...
BROM: Init... Ok
BROM: Enforcing... Skip
CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
CODE: G99
TYPE: NEXTGEN [LUCI]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
SOCID: 970B744C6596C5539B077EE70018CF1EBDB6075487ACCEB88FF679590D99F6C7
Agent:
[7c372304] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\DA_BR.bin
[81c203bc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\preloader_x6837_h897.bin
Looking for bootchain in DA...
Found: MT6789; DA: MTK_DOWNLOAD_AGENT
ID6 vendor: 5
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA started

LC: Agent online
Agent ENV tuned succesfully

Version: 1.2
DevRND: F25429B09E310EFAFD14DDCD5E06F5F4
Battery: 4403 mV
RAM Size: 0x0000000000 [ 0 B ]
Storage: UFS ID: HN8T162EHKX041
BlockSize: 0x001000
LUN0: 0x0000400000 [ 4.00 Mb ]
LUN1: 0x0000400000 [ 4.00 Mb ]
LUN2: 0x3B96000000 [ 238.34 Gb ]
LUN3: 0x0000000000 [ 0 B ]

LC: Hardware not initialized yet. Process HWinit...
LC: Hardware init Ok
LC: Set HostCapps... Ok
LC: Set HostInfo... Ok

Version: 1.2
DevRND: F25429B09E310EFAFD14DDCD5E06F5F4
Battery: 4403 mV
RAM Size: 0x0200000000 [ 8.00 Gb ]
Storage: UFS ID: HN8T162EHKX041
BlockSize: 0x001000
LUN0: 0x0000400000 [ 4.00 Mb ]
LUN1: 0x0000400000 [ 4.00 Mb ]
LUN2: 0x3B96000000 [ 238.34 Gb ]
LUN3: 0x0000000000 [ 0 B ]

LC: Boot to 2nd Agent..
LC: Boot to 2nd Agent fail.
Fail to init protocol
Check device hardware!
Disconnect test-point (if any) after connection
Finished 40 sec
Reconnect Power/Cable now
 
Abd El Rahman

Abd El Rahman

Active Member
Mar 28, 2021
65
23
Algeria
carmelillo18 said:
Wait...
S/N: 008BD8394C v0162
CM2 - MT2 Service Tool v2.64a9 (beta)
Init log engine... Ok
Build directories tree... Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 3 dirs: 0
Verify device database... BuiltIn: 28 Custom: 0
Build device list...
Load IDBase v915508 Ok
Load 146 profiles... Ok
libusb: v1.2.7.3
Init environment... Ok
Ready
DA selected: Ibrit | Alpha-AF51 | MTK_AllInOne_DA.e0cb318f.bin | preloader_h920w_v1_p_xh_x19b_ccit_1s.bin
2 DA available, try it one-by-one
DA selected: Infinix | -soc-Dimensity-9000 | DA_BR.13372eec.bin | auth_sv5.auth
DA selected: Infinix | X6837 | DA_BR.bin | preloader_x6837_h897.bin
MTK_DA_v6_2024-01-17 23:27:52

Operation: Identify [ v2.64a9 (beta) ]
Wait...
Connection: Boot [DA] Factory
Port: Both [ B + P ]; High-Speed: On
[+] Force BROM
[-] Local SLA
[+] Auto-EMI
[-] FireFly-Over-DA
- Power device Off [remember Test-Point]
- Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM56)
MODE [0]: PRELOADER PORT; PORT: 56
Waiting for BOOT ACK...
BROM: Init... Ok
BROM: Enforcing... Skip
CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
CODE: G99
TYPE: NEXTGEN [LUCI]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
SOCID: 970B744C6596C5539B077EE70018CF1EBDB6075487ACCEB88FF679590D99F6C7
Agent:
[7c372304] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\DA_BR.bin
[81c203bc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\preloader_x6837_h897.bin
Looking for bootchain in DA...
Found: MT6789; DA: MTK_DOWNLOAD_AGENT
ID6 vendor: 5
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA started

LC: Agent online
Agent ENV tuned succesfully

Version: 1.2
DevRND: F25429B09E310EFAFD14DDCD5E06F5F4
Battery: 4403 mV
RAM Size: 0x0000000000 [ 0 B ]
Storage: UFS ID: HN8T162EHKX041
BlockSize: 0x001000
LUN0: 0x0000400000 [ 4.00 Mb ]
LUN1: 0x0000400000 [ 4.00 Mb ]
LUN2: 0x3B96000000 [ 238.34 Gb ]
LUN3: 0x0000000000 [ 0 B ]

LC: Hardware not initialized yet. Process HWinit...
LC: Hardware init Ok
LC: Set HostCapps... Ok
LC: Set HostInfo... Ok

Version: 1.2
DevRND: F25429B09E310EFAFD14DDCD5E06F5F4
Battery: 4403 mV
RAM Size: 0x0200000000 [ 8.00 Gb ]
Storage: UFS ID: HN8T162EHKX041
BlockSize: 0x001000
LUN0: 0x0000400000 [ 4.00 Mb ]
LUN1: 0x0000400000 [ 4.00 Mb ]
LUN2: 0x3B96000000 [ 238.34 Gb ]
LUN3: 0x0000000000 [ 0 B ]

LC: Boot to 2nd Agent..
LC: Boot to 2nd Agent fail.
Fail to init protocol
Check device hardware!
Disconnect test-point (if any) after connection
Finished 40 sec
Reconnect Power/Cable now
Click to expand...

try different DA with [luci]
 
carmelillo18

carmelillo18

Active Member
Jan 31, 2020
32
4
LoRiKa CiTy
Abd El Rahman said:
Pruebe este archivo y háganos saber el resultado.


X6837-Hot 40 Pro.rar
Click to expand...
Operación: Identificar [ v2.64a9 (beta) ]
Esperar...
Conexión: Arranque [DA] Fábrica
Puerto: Ambos [B + P]; Alta velocidad: Activado
[-] Fuerza BROM
[-] Acuerdo de nivel de servicio local
[+] EMI automático
[+] FireFly sobre DA
- Apagar el dispositivo [recordar el punto de prueba]
- Conectar el cable [recuerde Vol+ | Vol-]
Esperando por el dispositivo...

PTFN: Precargador USB VCOM de MediaTek (Android) (COM56)
MODO [0]: PUERTO DE PRECARGA; PUERTO: 56
Esperando el BOOT ACK...
BROM: Inic... Ok
Código de barras: MT6789 Código de barras: 0x8A00 Código de barras: 0xCA00 Código de barras: 0x0000 Código de barras: 0x0000
Código: G99
TIPO: NEXTGEN [LUCI]
BROM: Nivel de seguridad: 0x00000005 Modo: SBC+SDA
VER: 0xFF BL: 0x03 [PUERTO DE PRECARGA]
SOCID: 970B744C6596C5539B077EE70018CF1EBDB6075487ACCEB88FF679590D99F6C7
Agente:
[f085fabc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\DA_BR.bin
[81c203bc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\preloader_x6837_h897.bin
Buscando bootchain en DA...
Encontrado: MT6789; DA: MTK_DOWNLOAD_AGENT
Proveedor ID6: 5
BROM: Enviando 1er DA...
Interfaz de reinicio
PTFN: Precargador USB VCOM de MediaTek (Android) (COM56)
MODO [0]: PUERTO DE PRECARGA; PUERTO: 56
Esperando el BOOT ACK...
BROM: Inic... Ok
Código de barras: MT6789 Código de barras: 0x8A00 Código de barras: 0xCA00 Código de barras: 0x0000 Código de barras: 0x0000
Código: G99
TIPO: NEXTGEN [LUCI]
BROM: Nivel de seguridad: 0x00000005 Modo: SBC+SDA
VER: 0xFF BL: 0x03 [PUERTO DE PRECARGA]
SOCID: 970B744C6596C5539B077EE70018CF1EBDB6075487ACCEB88FF679590D99F6C7
Agente:
[f085fabc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\DA_BR.bin
[81c203bc] C:\InfinityBox\CM2MT2\boot\Infinix\X6837\preloader_x6837_h897.bin
Buscando bootchain en DA...
Encontrado: MT6789; DA: MTK_DOWNLOAD_AGENT
Proveedor ID6: 5
BROM: Enviando 1er DA...
Error de envío de DA: 0x00007024 ARRANQUE SEGURO: ¡DA SELECCIONADO NO COMPATIBLE CON EL ESTADO ACTUAL DEL DISPOSITIVO!
PRECARGADOR Nivel: CORRECTO DA requerido: PL/PL_CRYPTO/SWSEC
Solicitar valores de configuración...
=> Probar cargadores:
1. [7a9f0e2e] 0_genérico/mt6789_genérico [luci]/da_br.2022-10-27
2. [7c983510] hormiga/mt6789/da_br
3. [c86b864b] da_2300.auth
4. [9ce17831] da_br
5. [9e4805e9] da_br
6. [a6ecbb8c] da_br
7. [a79c971d] da_br

leer manual - [MTK sec 2023/2024] - Infinity Box Dongle [CM2] [BEST] Support

Fallo de conexión
Desconecte la batería y el cable.
Asegúrese de que los controladores SoC estén bien instalados
Cambie el cable y el puerto USB, no utilice concentrador USB
Seleccione otra base|modelo|DA
Terminado 43 segundos
Vuelva a conectar la alimentación/cable ahora
 
You must log in or register to reply here.
Top