Free Samsung Galaxy C7 SM-C7000 Nougat 7.0 FRP Bypass Done

marsalkhanafridi

Active Member
Mar 28, 2018
60
5
pakistan in karachi
Skype
marsal.khan1
Sonork ID
100.1657105
sm-c7000 7.0 downgrad to 6.0.1



1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-C7000
Software version: 31.4

File analysis... OK
Total file size: 0xC47323B3 (3143 Mb)
Searching USB Flash interface... COM31 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending lksecapp.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:03:08)

Done with Samsung Tool PRO v.31.4
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-C7000
Software version: 31.4

File analysis... OK
Total file size: 0xC47323B3 (3143 Mb)
Searching USB Flash interface... COM31 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending lksecapp.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:03:08)

Done with Samsung Tool PRO v.31.4
 

deniwilliam

Member
May 2, 2018
5
0
gabon
Skype
thegolden01
please need your assitance. i have the same problem with my c7000 frp on. cant boot and cant flash bootloader. just bootloop and need to check drk first in recovery.
thanks in advance
IF Anyone Again Face This Issue For Remove Frp Lock On C7000
And Downgrading 7.0 TO 6.0.1
Contact Us We Provide Our Services Free
Contact Timing
10:00 AM TO 08.:00 PM
 
Top