Z3X Pandora Tool 6.3 / 6.4 new update

[SPYROS]

- Added support new Vivo security in Preloader mode for MT6781, MT6853, MT6891, MT6893
- Added Reset FRP in Download Mode (ODIN) for Samsung MTK phones
- Added support Samsung phones
SM-A136B, SM-A136M - Galaxy A13 5G,
SM-A137F - Galaxy A13,
SM-A145P, SM-A145R Galaxy A14,
SM-A146P, SM-A146U, SM-A146U1, SM-A146W - Galaxy A14 5G,
SM-A3460, SM-A346B, SM-A346E, SM-A346M, SM-A346N - Galaxy A34 5G,
SM-M136B - Galaxy M13 5G
- Fixed some bugs
Link:
168.85 MB file on MEGA

 

[tuserhp]

Pandora Tool V6.3 Setup Update​

 

[Bolatito86]

Thank you for supporting new phone but we need options like mdm remove for both mtk and spd

 

[GsmToto]

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x3EFD73DB, 0x10CF6662, 0x415CEF05, 0x6C0D3D5B
Get Chip ID... [MT6761]
Get SOC ID... [DC4E2E8639293C972B72A23B210F86962E10A78BAF3E2D6EEC 7B405C0F231E9D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD60103413341353531126EB8030059E1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A551
EMMC_ID : 0xD60103413341353531126EB8030059E1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Manufacturer : TCL
Product Model : mssi_64_ww
Product Board : MT6761
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Tue Jun 7 21:31:47 CST 2022
Display ID : SP1A.210812.016 release-keys
Security Patch : 2022-06-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : LV96
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!


Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 6.3
Work ID: 15653411

 

[faraday]

- Added support new Vivo security in Preloader mode for MT6781, MT6853, MT6891, MT6893
- Added Reset FRP in Download Mode (ODIN) for Samsung MTK phones
- Added support Samsung phones
SM-A136B, SM-A136M - Galaxy A13 5G,
SM-A137F - Galaxy A13,
SM-A145P, SM-A145R Galaxy A14,
SM-A146P, SM-A146U, SM-A146U1, SM-A146W - Galaxy A14 5G,
SM-A3460, SM-A346B, SM-A346E, SM-A346M, SM-A346N - Galaxy A34 5G,
SM-M136B - Galaxy M13 5G
- Fixed some bugs
Link:
168.85 MB file on MEGA

I think z3x team is unfair to z3x users by making pandora, greed is not good team

 

[best-one]

Vortex hd65 network unlock done pandora 6.3​

 

[haider421]

please add new samsung mtk factory reset in download mode

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Read Partitions
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC]
Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM13
Port: USB\VID_1782&PID_4D00\6&12957963&1&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T700_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: KS103SD220812800188
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Kinstone
Product Manufacturer : Kinstone
Product Model : KST103SD
Product Name : KST103SD
Product Device : KST103SD
Product Board : ums512_1h10
Board Platform : Sprd9863_11.0
Build ID : RP1A.201005.001
Build Date : Thu Dec 15 16:36:42 CST 2022
Display ID : KST103SD-XDC-Android11-T610-V0.1-211215
Security Patch : 2021-07-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 20210717
Userdata FS Type : F2FS
Read partition "pgpt"... OK
Read partition "splloader"... OK
Read partition "splloader_bak"... OK
Read partition "prodnv"... OK
Read partition "miscdata"... OK
Read partition "misc"... OK
Read partition "trustos_a"... OK
Read partition "trustos_b"... OK
Read partition "sml_a"... OK
Read partition "sml_b"... OK
Read partition "uboot_a"... OK
Read partition "uboot_b"... OK
Read partition "uboot_log"... OK
Read partition "logo"... OK
Read partition "fbootlogo"... OK
Read partition "l_fixnv1_a"... OK
Read partition "l_fixnv2_a"... OK
Read partition "l_fixnv1_b"... OK
Read partition "l_fixnv2_b"... OK
Read partition "l_runtimenv1"... OK
Read partition "l_runtimenv2"... OK
Read partition "gnssmodem_a"... OK
Read partition "gnssmodem_b"... OK
Read partition "wcnmodem_a"... OK
Read partition "wcnmodem_b"... OK
Read partition "persist"... OK
Read partition "l_modem_a"... OK
Read partition "l_modem_b"... OK
Read partition "l_deltanv_a"... OK
Read partition "l_deltanv_b"... OK
Read partition "l_gdsp_a"... OK
Read partition "l_gdsp_b"... OK
Read partition "l_ldsp_a"... OK
Read partition "l_ldsp_b"... OK
Read partition "l_agdsp_a"... OK
Read partition "l_agdsp_b"... OK
Read partition "l_cdsp_a"... OK
Read partition "l_cdsp_b"... OK
Read partition "pm_sys_a"... OK
Read partition "pm_sys_b"... OK
Read partition "teecfg_a"... OK
Read partition "teecfg_b"... OK
Read partition "hypervsior_a"... OK
Read partition "hypervsior_b"... OK
Read partition "boot_a"... OK
Read partition "boot_b"... OK
Read partition "vendor_boot_a"... OK
Read partition "vendor_boot_b"... OK
Read partition "dtb_a"... OK
Read partition "dtb_b"... OK
Read partition "dtbo_a"... OK
Read partition "dtbo_b"... OK
Read partition "super"... OK
Read partition "cache"... OK
Read partition "socko_a"... OK
Read partition "socko_b"... OK
Read partition "odmko_a"... OK
Read partition "odmko_b"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_b"... OK
Read partition "metadata"... OK
Read partition "sysdumpdb"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_system_b"... OK
Read partition "vbmeta_vendor_a"... OK
Read partition "vbmeta_vendor_b"... OK
Read partition "vbmeta_system_ext_a"... OK
Read partition "vbmeta_system_ext_b"... OK
Read partition "vbmeta_product_a"... OK
Read partition "vbmeta_product_b"... OK
Read partition "vbmeta_odm_a"... OK
Read partition "vbmeta_odm_b"... OK
Read partition "avbmeta_rs_a"... OK
Read partition "avbmeta_rs_b"... OK
Read partition "common_rs1_a"... OK
Read partition "common_rs1_b"... OK
Read partition "common_rs2_a"... OK
Read partition "common_rs2_b"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/SPD/Spreadtrum_Spreadtrum/Spreadtrum_Spreadtrum_DUMP_KS103SD220812800188_(20 23-12-29_12-7-35)/
Done!

 

[GsmToto]

Selected model: Xiaomi Mediatek
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0959
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x56451E17, 0x6D78AFED, 0xFE8D3697, 0x07183A75
Get Chip ID... [MT6877]
Get SOC ID... [97EDC7360BBD60B5939CC4FFBF7DA211BEDB34DE60AA76A681 1DC37ED96CA598]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ21AFAMADAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ21AFAMADAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x3B96000000 (238,34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0200000000 (8,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : redmi
Product Manufacturer : xiaomi
Product Model : missi
Product Name : missi
Product Device : missi
Build ID : SP1A.210812.016
Build Date : Thu Dec 1 21:06:30 CST 2022
Display ID : SP1A.210812.016
Security Patch : 2022-11-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : V13.0.7.0.SKTMIXM
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_MT6877/FRP_BACKUP_(2023-12-29_11-18-38)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-A107M (Samsung Galaxy A10s)
Operation: Erase FRP
Software version: 6.3

Searching USB Flash interface... COM4 detected
Setup connection... OK
Model: SM-A107M
SW version: A107MUBS6CWD2
Sales code: CDR
Device ID: b616cb097887
Vendor: SAMSUNG
Product: QD63MB
Unique Number: W155144303ACF607E9A6
FW Version: 3
Capacity: 32 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM66 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!

 

[GsmToto]

Selected model: Realme RMX3710 (Realme C55)
Operation: Erase FRP And Wipe
Software version: 6.3
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x22180378, 0x470C2740, 0x3B465C70, 0xE081A4FC
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x9B010059305332353600723123EB1AD5
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S256
EMMC_ID : 0x9B010059305332353600723123EB1AD5
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x3A3E000000 (232,97Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... error(0)
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX3710%20(Realme%20C55)/FRP_BACKUP_(2023-12-30_19-30-37)/
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Read PTT
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM11 [BROM]
Open port... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x124F4609, 0xE075896C, 0x8C41D72F, 0xA9300A34
Get Chip ID... [MT6761]
Get SOC ID... [5195D705875FC967A3A05525A79966C4154D3818E4C6BAB917 FDEB435B147469]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100525831424D4207AC85C4AD832B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RX1BMB
EMMC_ID : 0x150100525831424D4207AC85C4AD832B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Dialn
Product Manufacturer : Dialn
Product Model : X62
Product Name : X62B
Product Device : X62B
Product Board : X62
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Sep 27 14:17:57 CST 2023
Display ID : TP1A.220624.014
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20230927.1400
Userdata FS Type : EXT4
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "md_udc"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "logo"... OK
Read partition "md1img_a"... OK
Read partition "spmfw_a"... OK
Read partition "scp_a"... OK
Read partition "sspm_a"... OK
Read partition "gz_a"... OK
Read partition "lk_a"... OK
Read partition "boot_a"... OK
Read partition "vendor_boot_a"... OK
Read partition "init_boot_a"... OK
Read partition "dtbo_a"... OK
Read partition "tee_a"... OK
Read partition "vbmeta_a"... OK
Read partition "vbmeta_system_a"... OK
Read partition "vbmeta_vendor_a"... OK
Read partition "md1img_b"... OK
Read partition "spmfw_b"... OK
Read partition "scp_b"... OK
Read partition "sspm_b"... OK
Read partition "gz_b"... OK
Read partition "lk_b"... OK
Read partition "boot_b"... OK
Read partition "vendor_boot_b"... OK
Read partition "init_boot_b"... OK
Read partition "dtbo_b"... OK
Read partition "tee_b"... OK
Read partition "super"... OK
Read partition "vbmeta_b"... OK
Read partition "vbmeta_system_b"... OK
Read partition "vbmeta_vendor_b"... OK
Read partition "otp"... OK
Read partition "flashinfo"... OK
Read partition "sgpt"... OK
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6761/Mediatek_Mediatek_DUMP_(2024-1-3_12-11-22)/
Dumping Partitions done!

 

[GsmToto]

Selected model: Vodafone Mediatek
Operation: Unlock network
Software version: 6.3

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM9 [BROM]
Open port... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xED6ADD9A, 0x7319CEE2, 0xD6D34334, 0xBADCA878
Get Chip ID... [MT6739]
Get SOC ID... [155AAD097224DA4DDDD7664B8EC4D4C1F28C1989CD3D56ABF0 4640C4721BEBC2]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x700100474D414D44387003BB7327B96F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GMAMD8
EMMC_ID : 0x700100474D414D44387003BB7327B96F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A6800000 (14.60Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : MobiWire
Product Manufacturer : MobiWire
Product Model : Vodafone Lite 4G
Product Name : Vodafone_Lite_4G
Product Device : MobiWire_Verda
Product Board : k39tv1_bsp_1g
Board Platform : mt6739
Build ID : RP1A.200720.011
Build Date : Sat Aug 20 13:55:26 CST 2022
Display ID : RP1A.200720.011 release-keys
Security Patch : 2022-07-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1660974979
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Unlock... OK [DF1, GB2, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: ATT EA211001 (ATT Radiant Max 5G)
Operation: Unlock network
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0989
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Get HW code from device... 0989
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDE16BF81, 0x211B56F5, 0x1F6C190B, 0xF12BE42D
Get Chip ID... [MT6833]
Get SOC ID... [7616B70200C0D72CC269859E23E1EB01C59F89A2ABA42D390F F657E6D3D3C9B6]
Get sec config... OK [000000E1]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD6010335384B373231101CA022B078A1
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 58K721
EMMC_ID : 0xD6010335384B373231101CA022B078A1
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... error(0)
Read security partition from phone... OK
Read security files... OK
Read security files... OK
Read lock info... OK
Read partition "nvdata"... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2, GB1, GB2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[GsmToto]

Selected model: Infinix X6516 (Infinix Smart 7 HD)
Operation: Erase FRP
Software version: 6.3
Work ID: 16211788

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM7
Port: USB\VID_1782&PID_4D00\6&3378F16B&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 09598373A7008382
Read partitions info... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6516
Product Name : X6516-GL
Product Device : Infinix-X6516
Product Board : X6516
Board Platform : sp9863a
Build ID : SP1A.210812.001
Build Date : Tue Oct 17 15:52:37 CST 2023
Display ID : X6516-SE668SABCD-SGo-GL-231017V690
Security Patch : 2023-10-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231017V690
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[GsmToto]

Selected model: Infinix X6515 (Infinix X6515)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM64 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xAD3385D2, 0x646E984F, 0x1995E0A1, 0xF0A59327
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0xD62D004D4D43363447510BE19103C941
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC64G
EMMC_ID : 0xD62D004D4D43363447510BE19103C941
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x0E90280000 (58,25Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6515
Product Name : X6515-OP
Product Device : Infinix-X6515
Product Board : Infinix-X6515
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Tue Dec 20 21:36:59 CST 2022
Display ID : INFINIX-S-64-221220V339
Security Patch : 2022-11-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 221220V476
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X6515%20(Infinix%20X6515)/FRP_BACKUP_(2024-1-5_17-29-0)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Tecno KI7 (Tecno Spark 10 Pro)
Operation: Flash (Download only)
Software version: 6.3
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES

Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM22 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x80AEC626, 0xC6CE0A2C, 0x5DB102B8, 0x53198516
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0xD62D004D4D433235365117EC70B44AF7
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC256
EMMC_ID : 0xD62D004D4D433235365117EC70B44AF7
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A40A00000 (233,01Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI7
Product Name : KI7-GL
Product Device : TECNO-KI7
Product Board : TECNO-KI7
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Thu Nov 30 21:08:21 CST 2023
Display ID : TECNO-T-64-ARMV82-231130V2447
Security Patch : 2023-11-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 231020V2878
Userdata FS Type : F2FS
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK
Download "tkv_a"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "logo_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "super"... OK
Download "tranfs"... OK
Download "userdata"... OK
Flashing done!

 

[GsmToto]

Selected model: Tecno LD7 (Tecno Pova)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD8EAF0E5, 0xEFBC7CD2, 0xB37AE030, 0xF245CE8F
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x15010033563643414202B34AF23628CF
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CAB
EMMC_ID : 0x15010033563643414202B34AF23628CF
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x1D1EC00000 (116,48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO LD7
Product Name : LD7-OP
Product Device : TECNO-LD7
Product Board : TECNO-LD7
Board Platform : mt6768
Build ID : QP1A.190711.020
Build Date : Wed Aug 24 18:21:58 CST 2022
Display ID : TECNO-Q-64-220824V456
Security Patch : 2022-08-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 220824V456
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_LD7%20(Tecno%20Pova)/FRP_BACKUP_(2024-1-7_11-37-46)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Tecno KI7 (Tecno Spark 10 Pro)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x34BE55AD, 0x54660BAD, 0xE92673F0, 0x62EE9CD3
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0xD62D004D4D43323536511090663D2A3B
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC256
EMMC_ID : 0xD62D004D4D43323536511090663D2A3B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A40A00000 (233,01Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KI7
Product Name : KI7-GL
Product Device : TECNO-KI7
Product Board : TECNO-KI7
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Fri Aug 25 04:16:16 CST 2023
Display ID : TECNO-T-64-ARMV82-230824V2161
Security Patch : 2023-08-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 230825V2668
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KI7%20(Tecno%20Spark%2010%20Pro)/FRP_BACKUP_(2024-1-8_11-4-49)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Eliminar FRP
Software version: 6.3

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xDA5ED3CB, 0x4902DFBB, 0x6EB3AA09, 0x9643645F
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x1501004355544134320582258FCB68FD
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x1501004355544134320582258FCB68FD
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Tue Oct 31 21:12:11 CST 2023
Display ID : TECNO-RGo-32-231031V420
Security Patch : 2023-11-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 231031V479
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5j%20(Tecno%20Spark%20Go%202665)/FRP_BACKUP_(2024-1-8_17-24-43)/
Writting FRP data... OK
Erase FRP done!