Z3X Pandora Major update 6.0. Look inside!

[SPYROS]

Pandora Major update 6.0 Released



- Mediatek DA protocol version 6 are suported


- Added support new CPU in Preloader mode:

Helio G96 (MT6781), Helio G99 (MT6789), Dimensity 6100+ (MT6835), Dimensity 7200 (MT6886), ​

Dimensity 8000, Dimensity 8100, Dimensity 8100-Ultra, Dimensity 8200, Dimensity 8200 Ultra, (MT6895), ​

Dimensity 9000 (MT6983)​

- Added support new Vivo phones in Preloader mode:

PD2183, PD2183B, PD2183C, PD2183D, V2183A - Vivo X80​

PD2183F, PD2183BF, V2144 - Vivo X80​

V2186A, PD2186 - Vivo X80 Pro 5G​

PD2207, PD2207B, V2207A - Vivo S15 Pro​

PD2214F, V2201 - Vivo V25e​

V2231, V2246, PD2269F - Vivo V27 5G​

PD2238F, PD2238BF - Vivo iQOO Neo 7​

PD2245F, PD2245CF, PD2245DF, V2230 - Vivo V27 Pro​

PD2284F, PD2284BF, V2251 - Vivo V29 Pro​

PD2268F, V2237 - Vivo V27e​

- Added support new Realme phones:

​

RMX785 11X 5G, RMX3560, RMX3561, RMX3562, RMX3563 Realme GT Neo3​

RMX3630 Realme 10 4G, RMX3636 Realme 11 4G​

RMX3780 Realme 11 5G, RMX3782 Realme Narzo 60X, RMX3785 Realme 11X 5G*​

- Added support Realme and Oppo phones in Preloader mode


- Added full support in BROM and Preloader mode Motorola Moto E7 and E7 Power:

XT2095-1, XT2095-2, XT2095-3, XT2095-4, XT2097-5, XT2097-6, XT2097-7​

- Added support OnePlus phones in Preloader mode:

CPH2411, CPH2423 - OnePlus 10R​

CPH2491, CPH2493 - OnePlus Nord 3 5G​

- Added support new Infinix Mediatek phones:

X669C, X6710 Infinix Note 30 VIP, X6711 Infinix Note 30 5G, X6716 Infinix Note 30i, ​

X6716B Infinix Note 30i, X6731 Infinix Zero 30 5G, X6731B Infinix Zero 30 4G, X6739 Infinix GT 10 Pro,​

X676B Infinix Note 12 Pro, X676C Infinix Note 12 2023, X678B Infinix Note 30 Pro, X6821 Infinix Zero 20, ​

X6831 Infinix Hot 30, X6832 Infinix Hot 30 5G, X6833B Infinix Note 30, X6835 Infinix Hot 30 Play NFC, ​

X6835B Infinix Hot 30 Play NFC, X6836 Infinix Hot 40, X6837 Infinix Hot 40 Pro ​

​

- Added support a lot of old Tecno phones and new:

AD10 Tecno Phantom V Fold, AD11 Tecno Phantom V Flip, AD8 Tecno Phantom X2 5G, AD9 Tecno Phantom X2 Pro 5G, ​

BD4a Tecno Pop 5 LTE, BD4i Tecno Pop 5 LTE, BD4h, BD4j Tecno Pop 5 Pro, BE6j Tecno Pop 6 Go, BE7 Tecno Pop 6​

BE8 Tecno Pop 6 Pro, BE8i Tecno Pop 6 Pro, BG7 Tecno Spark 20C, CK7n Tecno Camon 20 Pro, CK9n Tecno Camon 20 Premier,​

KJ5, KJ5n Tecno Spark 20, LG7n Tecno Pova 4, LG8n Tecno Pova 4 Pro, LH6n Tecno Pova Neo 3, LH8n Tecno Pova 5 Pro, ​

LH7n Tecno Pova 5​

​

- Added support new Unisoc phones:

Tecno: BG6 Tecno Spark Go 2024, BG6s​

Infinix: X6525 Infinix Smart 8, X6528 Infinix Hot 40i, X6528B Infinix Hot 40i​

​

- Fixed some bugs


- Many improvement


DIRECT LINK MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

 

[tuserhp]

Pandora Box V6.0 Setup Update

 

[eRolas]

Pandora Box V6.0 Setup Update

What is your telegram? Can this tool sim unlock samsung s23 series?

 

[..::Waqar::..]

kindly add samsung kg lock remove permanent for a146p

 

[anku9794905285]

thank you team

 

[GsmToto]

Selected model: Spreadtrum Spreadtrum
Operation: Erase FRP And Wipe
Software version: 6.0
Work ID: 1346512

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM7
Port: USB\VID_1782&PID_4D00\6&3378F16B&0&6
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0051322S311018A6
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3231
Product Device : RMX3231
Product Board : RMX3231
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Tue Apr 4 02:53:27 CST 2023
Display ID : RMX3231_11.A.107
Security Patch : 2023-04-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 411
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Creating default filesystems... [CACHE: EXT4] ... [USERDATA: F2FS] ... OK
Done!

 

[550401114s]

After upgrading to 6.0, the VIVO MT6771 chip phone's higher version system's short-circuit free flashing function cannot be used, and it will prompt a DA error message

 

[550401114s]

Selected model: Vivo PD2168 (Vivo Y10 (T1 Version))
Operation: Flash (Download only)
Software version: 6.1
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES

Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0788
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6771]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x494ED8D6, 0xD314B869, 0x97B3C3E4, 0x9258D90E
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
UFS CID (FW VER): MT128GASAO4U21 (0109)
Send preloader... error(STATUS_DA_HASH_MISMATCH)

 

[muitechpro]

Pandora Major update 6.0 Released



- Mediatek DA protocol version 6 are suported


- Added support new CPU in Preloader mode:

Helio G96 (MT6781), Helio G99 (MT6789), Dimensity 6100+ (MT6835), Dimensity 7200 (MT6886), ​

Dimensity 8000, Dimensity 8100, Dimensity 8100-Ultra, Dimensity 8200, Dimensity 8200 Ultra, (MT6895), ​

Dimensity 9000 (MT6983)​

- Added support new Vivo phones in Preloader mode:

PD2183, PD2183B, PD2183C, PD2183D, V2183A - Vivo X80​

PD2183F, PD2183BF, V2144 - Vivo X80​

V2186A, PD2186 - Vivo X80 Pro 5G​

PD2207, PD2207B, V2207A - Vivo S15 Pro​

PD2214F, V2201 - Vivo V25e​

V2231, V2246, PD2269F - Vivo V27 5G​

PD2238F, PD2238BF - Vivo iQOO Neo 7​

PD2245F, PD2245CF, PD2245DF, V2230 - Vivo V27 Pro​

PD2284F, PD2284BF, V2251 - Vivo V29 Pro​

PD2268F, V2237 - Vivo V27e​

- Added support new Realme phones:

​

RMX785 11X 5G, RMX3560, RMX3561, RMX3562, RMX3563 Realme GT Neo3​

RMX3630 Realme 10 4G, RMX3636 Realme 11 4G​

RMX3780 Realme 11 5G, RMX3782 Realme Narzo 60X, RMX3785 Realme 11X 5G*​

- Added support Realme and Oppo phones in Preloader mode


- Added full support in BROM and Preloader mode Motorola Moto E7 and E7 Power:

XT2095-1, XT2095-2, XT2095-3, XT2095-4, XT2097-5, XT2097-6, XT2097-7​

- Added support OnePlus phones in Preloader mode:

CPH2411, CPH2423 - OnePlus 10R​

CPH2491, CPH2493 - OnePlus Nord 3 5G​

- Added support new Infinix Mediatek phones:

X669C, X6710 Infinix Note 30 VIP, X6711 Infinix Note 30 5G, X6716 Infinix Note 30i, ​

X6716B Infinix Note 30i, X6731 Infinix Zero 30 5G, X6731B Infinix Zero 30 4G, X6739 Infinix GT 10 Pro,​

X676B Infinix Note 12 Pro, X676C Infinix Note 12 2023, X678B Infinix Note 30 Pro, X6821 Infinix Zero 20, ​

X6831 Infinix Hot 30, X6832 Infinix Hot 30 5G, X6833B Infinix Note 30, X6835 Infinix Hot 30 Play NFC, ​

X6835B Infinix Hot 30 Play NFC, X6836 Infinix Hot 40, X6837 Infinix Hot 40 Pro ​

​

- Added support a lot of old Tecno phones and new:

AD10 Tecno Phantom V Fold, AD11 Tecno Phantom V Flip, AD8 Tecno Phantom X2 5G, AD9 Tecno Phantom X2 Pro 5G, ​

BD4a Tecno Pop 5 LTE, BD4i Tecno Pop 5 LTE, BD4h, BD4j Tecno Pop 5 Pro, BE6j Tecno Pop 6 Go, BE7 Tecno Pop 6​

BE8 Tecno Pop 6 Pro, BE8i Tecno Pop 6 Pro, BG7 Tecno Spark 20C, CK7n Tecno Camon 20 Pro, CK9n Tecno Camon 20 Premier,​

KJ5, KJ5n Tecno Spark 20, LG7n Tecno Pova 4, LG8n Tecno Pova 4 Pro, LH6n Tecno Pova Neo 3, LH8n Tecno Pova 5 Pro, ​

LH7n Tecno Pova 5​

​

- Added support new Unisoc phones:

Tecno: BG6 Tecno Spark Go 2024, BG6s​

Infinix: X6525 Infinix Smart 8, X6528 Infinix Hot 40i, X6528B Infinix Hot 40i​

​

- Fixed some bugs


- Many improvement


DIRECT LINK MEGA



DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

hellow i accidentary formated x6837 preloader now my phone does not detect on pc any more any one with test point plz or what can i do to make this phone detect again...

 

[tofikm]

Hello