DTPro Nova 9SE error

[marghil]

hy
Nova 9SE JLN-LX1 no work, try to remove chip is damaged
done: Run Qualcomm module as administrator!
Select Brand: Huawei
Select Xboot: Corresponding Model (Nova 9SE)
Perform Testpoint [for edl connection]
Press the ID Button

10/11/2023 1:28:13 PM - Checking Connected Devices..
10/11/2023 1:28:14 PM - Device @COM20;
10/11/2023 1:28:14 PM - Switching Phone Mode..
10/11/2023 1:28:14 PM - Comunicating..
10/11/2023 1:28:14 PM - Msm : 0x001B80E1
10/11/2023 1:28:14 PM - PBL : 0x0xcc3153a80293939b90d02d3bf8b23e0292e452fef662c7499
10/11/2023 1:28:14 PM - Sbl : 0x00000000
10/11/2023 1:28:14 PM - Writing Flash-Boot Loader..
10/11/2023 1:28:20 PM - Setting Config..
10/11/2023 1:28:28 PM - DT ERROR LOG CODE - 2222

please help
thx

 

[DTPRO Tool]

1 - error 2222 = ID does not correspond to the selected Model...
please do verification...
-several successful reports we have had here! and the EDL Connection works without problems.. please hire! and perform the steps correctly.

 

[marghil]

please do verification...
-several successful reports we have had here! and the EDL Connection works without problems.. please hire! and perform the steps correctly.

done but after hard reset phone restart after logo.
how can i do?
thx

10/14/2023 2:56:35 PM - Checking Connected Devices..
10/14/2023 2:56:35 PM - Device @COM48;
10/14/2023 2:56:35 PM - Switching Phone Mode..
10/14/2023 2:56:35 PM - Comunicating..
10/14/2023 2:56:35 PM - Msm : 0x001B80E1
10/14/2023 2:56:35 PM - PBL : 0x0xcc3153a80293939b90d02d3bf8b23e0292e452fef662c7499
10/14/2023 2:56:35 PM - Sbl : 0x00000000
10/14/2023 2:56:35 PM - Writing Flash-Boot Loader..
10/14/2023 2:56:40 PM - Setting Config..
10/14/2023 2:56:42 PM - Memory Type : eMMC
10/14/2023 2:56:42 PM - Write Buffer : 1048576
10/14/2023 2:57:00 PM - Chip Size : 119.15 GB
10/14/2023 2:57:00 PM - Gpt Count : 76
10/14/2023 2:57:00 PM - Reading Security Data...
10/14/2023 2:57:09 PM - Searching for Required Data..
10/14/2023 2:57:11 PM - Patch Data Found..
10/14/2023 2:57:11 PM - Rebooting..


10/14/2023 2:57:12 PM - NOTE : Reset phone manually from recovery if the ID is not removed..

 

[DTPRO Tool]

done but after hard reset phone restart after logo.
how can i do?
thx

10/14/2023 2:56:35 PM - Checking Connected Devices..
10/14/2023 2:56:35 PM - Device @COM48;
10/14/2023 2:56:35 PM - Switching Phone Mode..
10/14/2023 2:56:35 PM - Comunicating..
10/14/2023 2:56:35 PM - Msm : 0x001B80E1
10/14/2023 2:56:35 PM - PBL : 0x0xcc3153a80293939b90d02d3bf8b23e0292e452fef662c7499
10/14/2023 2:56:35 PM - Sbl : 0x00000000
10/14/2023 2:56:35 PM - Writing Flash-Boot Loader..
10/14/2023 2:56:40 PM - Setting Config..
10/14/2023 2:56:42 PM - Memory Type : eMMC
10/14/2023 2:56:42 PM - Write Buffer : 1048576
10/14/2023 2:57:00 PM - Chip Size : 119.15 GB
10/14/2023 2:57:00 PM - Gpt Count : 76
10/14/2023 2:57:00 PM - Reading Security Data...
10/14/2023 2:57:09 PM - Searching for Required Data..
10/14/2023 2:57:11 PM - Patch Data Found..
10/14/2023 2:57:11 PM - Rebooting..


10/14/2023 2:57:12 PM - NOTE : Reset phone manually from recovery if the ID is not removed..

apply Factory reset.....