Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

[Deepesh Sharma]

Post Here Sucessfully Repaired Phone/Emmc Reprogramming By ufi BOx

​

Warning: Only UFi Box Success reports here all other posts will be removed.


If you want to post a success report by UFi Dongle move to UFi Dongle Success Reports


Thanks

​

 

[maanarman]

Lenovo A319 Write Flash With UFI Box

Info

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected MediaTek PreLoader USB VCOM Port (COM10)
USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0xFF, BL ver: 0x01
Secure config: 0x00
SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2a (0x483447326111), rev: 0x01, serial number: 0x69B2A86A
Manufacturing date: May 2015
CID: 90014A48 34473261 110169B2 A86A528B
Capacity: 3.65 GiB(3,921,674,240 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed

platform: MT6572, cpu abi: armeabi-v7a
manufacturer: LENOVO
board: A319, name: A319
brand: Lenovo, model: Lenovo A319
build id: MocorDroid4.4.2, version: 4.4.2 Lollipop (A319_ROW_DS_S319_161222)
build description: huaqin72_cwet_1a_kk-user LenovoA319 A319_ROW_DS_S319_161222 release-keys

build version: A319_ROW_DS_S319_161222
lcd: ili9806e_dsi_vdo_dijing otm8019a_dsi_vdo_dijing ili9806c_dsi_vdo_dijing
screen resolution: 800 x 480
main camera: ov5645_mipi_yuv
lens: sensordrive
front camera: gc2035_yuv hi257_yuv
audio: amp_aw8145
touch: ft6206 GT9XX
modem: HUAQIN72_CWET_1A_KK_HSPA_MASTER_0113

Write Flash

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected MediaTek PreLoader USB VCOM Port (COM10)
USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0xFF, BL ver: 0x01
Secure config: 0x00
SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2a (0x483447326111), rev: 0x01, serial number: 0x69B2A86A
Manufacturing date: May 2015
CID: 90014A48 34473261 110169B2 A86A528B
Capacity: 3.65 GiB(3,921,674,240 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed

Verifying SoC: passed
Verifying CID: passed
Writing MBR, size: 512 bytes
Writing EBR1, size: 512 bytes
Writing UBOOT, size: 384 KiB
Writing BOOTIMG, size: 6 MiB
Writing RECOVERY, size: 4.45 MiB
Writing SEC_RO, size: 132 KiB
Writing LOGO, size: 226.02 KiB
Writing ANDROID, size: 1.46 GiB
Writing CACHE, size: 5.87 MiB
Writing USRDATA, size: 11.92 MiB

Completed in 5 mins 41.183 s

 

[maanarman]

Qmobile W20 Read FF With UFI Box

Info

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port... Done.
 Detected MediaTek PreLoader USB VCOM Port (COM10)
 USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6580_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: EE4EA4 (0x454534454134), rev: 0x01, serial number: 0x10EB49F5
Manufacturing date: May 2016
CID: 70010045 45344541 340110EB 49F55363
Capacity: 3.54 GiB(3,796,369,408 bytes)
 Boot1: 2048 KiB
 Boot2: 2048 KiB
 RPMB: 512 KiB
 User area: 3.53 GiB(3,791,650,816 bytes)
USB speed: High-Speed

platform: MT6580, cpu abi: armeabi-v7a
manufacturer: QMobile
board: MT6580, name: QMobile W20
brand: QMobile, model: QMobile W20
build id: LMY47I, version: 5.1 Lollipop (QMobileW20_MP_17_05_2016)
build description: full_A135-user 5.1 LMY47I 1463461163 test-keys

build version: ALPS.L1.MP6.V2.19_GINR6580.WE.L_P21
screen resolution: 800 x 480
main camera: sp2509_mipi_raw gc2355_mipi_raw
 lens: dummy_lens
front camera: sp2509sub_mipi_raw gc2355sub_mipi_raw
audio: amp_6323pmic_spk
touch: MSG22XX
modem: A135_WG_band1_Edge

Internal storage: 1.60 GiB
crypto state: unencrypted

Read Firmware

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port... Done.
 Detected MediaTek PreLoader USB VCOM Port (COM10)
 USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6580_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: EE4EA4 (0x454534454134), rev: 0x01, serial number: 0x10EB49F5
Manufacturing date: May 2016
CID: 70010045 45344541 340110EB 49F55363
Capacity: 3.54 GiB(3,796,369,408 bytes)
 Boot1: 2048 KiB
 Boot2: 2048 KiB
 RPMB: 512 KiB
 User area: 3.53 GiB(3,791,650,816 bytes)
USB speed: High-Speed

platform: MT6580, cpu abi: armeabi-v7a
manufacturer: QMobile
board: MT6580, name: QMobile W20
brand: QMobile, model: QMobile W20
build id: LMY47I, version: 5.1 Lollipop (QMobileW20_MP_17_05_2016)
build description: full_A135-user 5.1 LMY47I 1463461163 test-keys

build version: ALPS.L1.MP6.V2.19_GINR6580.WE.L_P21
screen resolution: 800 x 480
main camera: sp2509_mipi_raw gc2355_mipi_raw
 lens: dummy_lens
front camera: sp2509sub_mipi_raw gc2355sub_mipi_raw
audio: amp_6323pmic_spk
touch: MSG22XX
modem: A135_WG_band1_Edge

Internal storage: 1.60 GiB
crypto state: unencrypted

Reading preloader_a135.bin... Done.
Reading pgpt... Done.
Reading proinfo.bin... Done.
Reading nvram... Done.
Reading protect1... Done.
Reading protect2... Done.
Reading seccfg... Done.
Reading lk.bin... Done.
Reading boot.img... Done.
Reading recovery.img... Done.
Reading para... Done.
Reading logo.bin... Done.
Reading expdb... Done.
Reading frp... Done.
Reading nvdata... Done.
Reading metadata... Done.
Reading oemkeystore... Done.
Reading secro.img... Done.
Reading keystore... Done.
Reading system.img... Done.
Reading cache.img... Done.
Reading userdata.img... Done.
Reading flashinfo... Done.
Files saved to \\C:\Users\test\Desktop\TEMP\

Completed in 12 mins 10.670 s

 

[maanarman]

Qmobile I5 Write Flash With Ufi Box

Info

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port... Done.
 Detected MediaTek PreLoader USB VCOM Port (COM10)
 USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x01A1B93F
Manufacturing date: May 2014
CID: 90014A48 34473164 040501A1 B93F5147
Capacity: 3.65 GiB(3,921,674,240 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed

platform: MT6582, cpu abi: armeabi-v7a
manufacturer: alps
board: s4700, name: QMobile i5
brand: QMobile, model: QMobile i5
build id: JDQ39, version: 4.2.2 Jelly Bean (ALPS.JB5.MP.V1.6)
build description: s4700-user 4.2.2 JDQ39 7 release-keys

Write Flash

BROM version[0]: 7.1625.3.0
Loading DA: MTK_AllInOne_DA.bin (6.11 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
 Scanning BootROM or Preloader port... Done.
 Detected MediaTek PreLoader USB VCOM Port (COM10)
 USB Driver: [MediaTek Inc.] usbser, version: 1.1123.0.0, date: 5-30-2011
Connecting Bootrom... Done.
Sending Download Agent... Done.
Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G1d (0x483447316404), rev: 0x05, serial number: 0x01A1B93F
Manufacturing date: May 2014
CID: 90014A48 34473164 040501A1 B93F5147
Capacity: 3.65 GiB(3,921,674,240 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed

Verifying SoC: passed
Verifying CID: passed
Writing PRELOADER, size: 114.89 KiB
Writing MBR, size: 512 bytes
Writing EBR1, size: 512 bytes
Writing UBOOT, size: 236.35 KiB
Writing BOOTIMG, size: 4.50 MiB
Writing RECOVERY, size: 5 MiB
Writing SEC_RO, size: 132 KiB
Writing LOGO, size: 407.47 KiB
Writing EBR2, size: 512 bytes
Writing ANDROID, size: 1.13 GiB
Writing CACHE, size: 8.01 MiB
Writing USRDATA, size: 16.01 MiB
Writing FAT, size: 4 MiB

Completed in 3 mins 27.263 s

 

[Deepesh Sharma]

Micromax a96 dead recover done

 

[Deepesh Sharma]

Samsung J7 Next(J701F) Dead Recover With Repair Emmc Job Sucessfully Done Thanks To Ufi-BOx
Got Dead Set Not Connect With Isp Pinout Now JOb Done

Image

Please login to view image

Ufi-Log

Please login to view image

Set Alive NOW

Please login to view image

 

[maanarman]

Motorola Xt1028 Blue Display After M logo Solve With Ufi Dongle

Factory reset
Creating filesystem with parameters:
Size: 694288384
Block size: 4096
Blocks per group: 32768
Inodes per group: 7072
Inode size: 256
Journal blocks: 2648
Label:
Blocks: 169504
Block groups: 6
Reserved block group size: 47
Created filesystem with 11/42432 inodes and 5511/169504 blocks
Erase successful, but not automatically formatting.
File system type raw not supported.
target reported max download size of 536870912 bytes
erasing 'userdata'... OKAY [  0.238s]
erasing 'cache'... OKAY [  0.078s]
sending 'cache' (12640 KB)... OKAY [  0.446s]
writing 'cache'... OKAY [  0.688s]
resuming boot... OKAY [  0.001s]

 

[Deepesh Sharma]

intex Aqua Power iv Dead Recover Change Emmc Skhynix To Samsung
Intex Aqua Power iv Dead Set Emmc Replace Skhynix To Samsung Job DOne
Set Alive Sucessfully With Ufi-Box
Image

Please login to view image

Ufi Log

Please login to view image

Sucessfully Alive Hnadset

Please login to view image

 

[maanarman]

Samsung Sm-j510f Dead Boot Reapair With UFI Box

Info

Connection status: NUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-9052
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4v2 (0x484147347632), rev: 0x01, serial number: 0x1DA750E5
Manufacturing date: Aug 2017
CID: 90014A48 41473476 32011DA7 50E584E0
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)

Current partition access:
Access to boot partition 1
Erasing boot1 data... Done in 0.148 s
Current partition access:
Access to boot partition 2
Erasing boot2 data... Done in 0.310 s
Current partition access:
Access to user area
Erasing userarea data... Done in 0.173 s

Repair

Connection status: NUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-9052
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4v2 (0x484147347632), rev: 0x01, serial number: 0x1DA750E5
Manufacturing date: Aug 2017
CID: 90014A48 41473476 32011DA7 50E584E0
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\\C:\Users\test\Desktop\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\boot1.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 0.636 s
Current partition access:
Access to boot partition 2
Loading file: "\\C:\Users\test\Desktop\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 0.664 s
Current partition access:
Access to user area
Loading file: "\\C:\Users\test\Desktop\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\userarea.bin", size: 14.68 GiB...
Writing userarea (30777344 sectors)... Done in 25 mins 14.716 s
Loading file: "\\C:\Users\test\Desktop\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\SM-J510FN(MMB29M.J510FNXXU2AQD2-6.0.1-MMB29M)[Q313BB]\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done.
New EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
User area write protection: 0x10

Info After Repair

Connection status: NUSB3HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-9052
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4v2 (0x484147347632), rev: 0x01, serial number: 0x1DA750E5
Manufacturing date: Aug 2017
CID: 90014A48 41473476 32011DA7 50E584E0
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x10
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked

ANDROID System Info:
platform: msm8916, cpu abi: armeabi-v7a
manufacturer: samsung
board: MSM8916, name: j5xnltexx
brand: samsung, model: SM-J510FN
build id: MMB29M, version: 6.0.1 Marshmallow (MMB29M.J510FNXXU2AQD2)
build description: j5xnltexx-user 6.0.1 MMB29M J510FNXXU2AQD2 release-keys

Internal storage: 11.15 GiB
crypto state: unencrypted

Please login to view image

 

[Deepesh Sharma]

Micromax Q440 Full Dead Short Mobile Recover Done Sucessfully Replace Emmc With Samsung To Samsung
Micromax Q440 Fully Dead Mobile Short 1St Chnage Power Ic
After Replace Emmc Sasmsung To Samsung Reprogramme With Ufi
All Job Sucessfully Done
Image

Please login to view image

Log

Please login to view image

Log-2

Please login to view image

Sucessfully Alive Handset

Please login to view image

 

[maanarman]

Redmi 5A Riva Dead Recover Done Via Ufi Box

Firmware package: riva_global_images_V9.1.6.0.NCKMIEI_20171121.0000.00_7.1_global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM59)
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.1.2, date: 3-19-2014
Initializing...
 MSM Serial number: 0x98a8b448
 MSM HW ID: 0x000560e1  (MSM8917)
 OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
 SBL SW version: 0
 Sending prog_emmc_firehose_8917_ddr.mbn, size: 375.50 KiB... Done.
 Attempting to run firehose... Done.
 Sending ping... Done.
 Sending configurations...
  TargetName: 8917
  MemoryName: eMMC
  Version: 1
 Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x44D2F2A5
Capacity: 14.57 GiB(15,646,851,072 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)

Processing rawprogram0.xml
 Writing PrimaryGPT at 0x00000000 (34 sectors)... Done.
  Applying patch: Update last partition 49 'userdata' with actual size in Primary Header....Done.
  Applying patch: Update Primary Header with LastUseableLBA....Done.
  Applying patch: Update Primary Header with BackupGPT Header Location....Done.
  Applying patch: Update Primary Header with CRC of Partition Array....Done.
  Applying patch: Zero Out Header CRC in Primary Header....Done.
  Applying patch: Update Primary Header with CRC of Primary Header....Done.
 Writing modem at 0x04000000 (172032 sectors)... Done.
 Writing sbl1 at 0x0C002400 (682 sectors)... Done.
 Writing sbl1bak at 0x0C082400 (682 sectors)... Done.
 Writing rpm at 0x0C102400 (361 sectors)... Done.
 Writing rpmbak at 0x0C182400 (361 sectors)... Done.
 Writing tz at 0x0C202400 (3031 sectors)... Done.
 Writing tzbak at 0x0C402400 (3031 sectors)... Done.
 Writing devcfg at 0x0C602400 (120 sectors)... Done.
 Writing devcfgbak at 0x0C642400 (120 sectors)... Done.
 Writing dsp at 0x0C682400 (32768 sectors)... Done.
 Writing splash at 0x14000000 (21604 sectors)... Done.
 Writing aboot at 0x18000000 (1077 sectors)... Done.
 Writing abootbak at 0x18100000 (1077 sectors)... Done.
 Writing boot at 0x18200000 (59563 sectors)... Done.
 Writing recovery at 0x1C200000 (62379 sectors)... Done.
 Writing system at 0x20300000 (6021330 sectors)... Done.
 Writing cache at 0xE4000000 (12497 sectors)... Done.
 Writing lksecapp at 0x104000000 (113 sectors)... Done.
 Writing lksecappbak at 0x104020000 (113 sectors)... Done.
 Writing cmnlib at 0x104040000 (402 sectors)... Done.
 Writing cmnlibbak at 0x104080000 (402 sectors)... Done.
 Writing cmnlib64 at 0x1040C0000 (509 sectors)... Done.
 Writing cmnlib64bak at 0x104100000 (509 sectors)... Done.
 Writing keymaster at 0x104140000 (442 sectors)... Done.
 Writing keymasterbak at 0x104180000 (442 sectors)... Done.
 Writing cust at 0x10C000000 (490819 sectors)... Done.
 Writing userdata at 0x12C000000 (734692 sectors)... Done.
 Writing BackupGPT at NUM_DISK_SECTORS-33. (33 sectors)... Done.
  Applying patch: Update last partition 49 'userdata' with actual size in Backup Header....Done.
  Applying patch: Update Backup Header with LastUseableLBA....Done.
  Applying patch: Update Backup Header with CurrentLBA....Done.
  Applying patch: Update Backup Header with Partition Array Location....Done.
  Applying patch: Update Backup Header with CRC of Partition Array....Done.
  Applying patch: Zero Out Header CRC in Backup Header....Done.
  Applying patch: Update Backup Header with CRC of Backup Header....Done.
 Applying DISK patch... Done.
Reset power ... Done.

Flashing completed in 4 mins 31.003 s

 

[Deepesh Sharma]

Micromax A120 Dead Recover With Replace Emmc Skhynix TO Skhynix
Micromax A120 Dead Recover With Ufi-Box

Image-1

Please login to view image

Log Ufi-Box

Please login to view image

Set Sucessfully Alive

Please login to view image

 

[Dr.sunilsingh]

:mm: micromax A102
dead Recover
finally reprogramme emmc with Ufi job done.

Please login to view image

Please login to view image

Please login to view image

Please login to view image

REGARDS :
Dr.SUNIL SINGH
BIHAR EMMC GROUP

 

[Deepesh Sharma]

I-BALL 3G6095Q-700 Dead Recover
With Repair Emmc Set ALive Done
Image

Please login to view image

Ufi-Log

Please login to view image

Set Alive Done

Please login to view image

Please login to view image

 

[maanarman]

Vivo Y55s Remove Phone Lock Done Ufi Box

Model: Vivo Y55
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM44)
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.1.2, date: 3-19-2014
Initializing...
 MSM Serial number: 0x1ed9f209
 MSM HW ID: 0x000560e1  (MSM8917)
 OEM Public Key Hash: 0x60ba997fef6da9f05885fa11f1dd6d2a90d052a257a09c2075d7246cc73c0d43
 SBL SW version: 0
 Sending prog_emmc_firehose_8917_ddr[0].mbn, size: 326.36 KiB... Done.
 Attempting to run firehose... Done.
 Sending ping... Done.
 Sending configurations...
  TargetName: 8917
  MemoryName: eMMC
  Version: 1
 Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: RE1BMB (0x524531424d42), rev: 0x0D, serial number: 0x00000000
Capacity: 14.57 GiB(15,646,851,072 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
platform: msm8937, cpu abi: armeabi-v7a
manufacturer: vivo
board: QC_Reference_Phone, name: PD1613BF_EX
brand: vivo, model: vivo 1610
build id: MMB29M, version: 6.0.1 Marshmallow (MMB29M release-keys)
build description: msm8937_32-user 6.0.1 MMB29M eng.compiler.20180420.173905 release-keys
crypto state: encrypted

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM44)
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.1.2, date: 3-19-2014
Initializing...

platform: msm8937, cpu abi: armeabi-v7a
manufacturer: vivo
board: QC_Reference_Phone, name: PD1613BF_EX
brand: vivo, model: vivo 1610
build id: MMB29M, version: 6.0.1 Marshmallow (MMB29M release-keys)
build description: msm8937_32-user 6.0.1 MMB29M eng.compiler.20180420.173905 release-keys

Factory reset...
 Creating filesystem... Done.
 Writing cache... Done.
 Creating filesystem... Done.
 Writing userdata... Done.

 

[Deepesh Sharma]

Samsung galaxy Tab-3 Dead Recover Repair Emmc/Read Dump
Samsung Tab-3 T116Ny Dead Recover With Emmc Repair Connect Isp Pinout And Read Dump File For Ufi-Box User

Image-1

Please login to view image

Emmc Repair

Please login to view image

Sucessfully Alive Handset

Please login to view image

Read Dump

Please login to view image

 

[Martview]

The first attempt first succeeding oppo R827 stoke on logo solve after repair emmc via ISP

Special thanks to my mentors
Mirwan Sht Boyang and Toto Rusbianto

Special Thanks to : Ahmad Aim for sharing it

Please login to view image

Please login to view image

Please login to view image

 

[Dr.sunilsingh]

Dead Recover VIVO Y31L Rog File Dead

Finally Reprogramme Emmc Repaired/Dead Sucessfully By Ufi Box


1 Rong File Dead Ufi Log

Please login to view image

2 Backups Read

Please login to view image

3 Reprogramme Emmc

Please login to view image

4 Sucessfully VIVO Y31L Write File

Please login to view image

5 Backups Write

Please login to view image

6 Emmc Universal Flashing Interface

Please login to view image

7 Emmc Remove

Please login to view image

8 Qfil Flash Succeed

Please login to view image

9 Sucessfully Alive Handset

Please login to view image

10 About Phone

Please login to view image

3

 

[Deepesh Sharma]

Samsung Tab-3Neo Dead Recover[Making Dead Port-Emei] And Replace Emmc All Job DOne
Samsung T-111 Making Dead Port EMEI Fix And Replace Emmc SanDisk To Samsung All Job Sucessfully Done With Ufi Box
Dead Port

Please login to view image

Image

Please login to view image

Write Dump

Please login to view image

Log-Info

Please login to view image

Sucessfully Recover in Recovery Mode

Please login to view image

Now Handset REcovered

Please login to view image

 

[maanarman]

Redmi 4x Hang Logo Solve With Ufi Box

Firmware package: santoni_global_images_V8.2.9.0.MAMMIEA_20170427.0000.00_6.0_global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM67)
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 5.1.1.2, date: 1-10-2020
Initializing...
 MSM Serial number: 0x6206bec9
 MSM HW ID: 0x0006b0e1  (MSM8940)
 OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
 SBL SW version: 0
 Sending prog_emmc_firehose_8937_ddr.mbn, size: 402.86 KiB... Done.
 Attempting to run firehose... Done.
 Sending ping... Done.
 Sending configurations...
  TargetName: 8937
  MemoryName: eMMC
  Version: 1
 Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64MB (0x524836344d42), rev: 0x05, serial number: 0x00000000
Capacity: 58.25 GiB(62,549,655,552 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 58.24 GiB(62,537,072,640 bytes)

Processing rawprogram0.xml
 Writing PrimaryGPT at 0x00000000 (34 sectors)... Done.
  Applying patch: Update last partition 49 'userdata' with actual size in Primary Header....Done.
  Applying patch: Update Primary Header with LastUseableLBA....Done.
  Applying patch: Update Primary Header with BackupGPT Header Location....Done.
  Applying patch: Update Primary Header with CRC of Partition Array....Done.
  Applying patch: Zero Out Header CRC in Primary Header....Done.
  Applying patch: Update Primary Header with CRC of Primary Header....Done.
 Writing modem at 0x04000000 (172032 sectors)... Done.
 Writing sbl1 at 0x0C002400 (728 sectors)... Done.
 Writing sbl1bak at 0x0C082400 (728 sectors)... Done.
 Writing rpm at 0x0C102400 (364 sectors)... Done.
 Writing rpmbak at 0x0C182400 (364 sectors)... Done.
 Writing tz at 0x0C202400 (2903 sectors)... Done.
 Writing tzbak at 0x0C402400 (2903 sectors)... Done.
 Writing devcfg at 0x0C602400 (105 sectors)... Done.
 Writing devcfgbak at 0x0C642400 (105 sectors)... Done.
 Writing dsp at 0x0C682400 (32768 sectors)... Done.
 Writing splash at 0x14000000 (10802 sectors)... Done.
 Writing aboot at 0x18000000 (1178 sectors)... Done.
 Writing abootbak at 0x18100000 (1178 sectors)... Done.
 Writing boot at 0x18200000 (37255 sectors)... Done.
 Writing recovery at 0x1C200000 (39047 sectors)... Done.
 Writing system at 0x20300000 (5995908 sectors)... Done.
 Writing cache at 0xE4000000 (12497 sectors)... Done.
 Writing persist at 0xF4000000 (9433 sectors)... Done.
 Writing mdtp at 0x100180000 (2000 sectors)... Done.
 Writing lksecapp at 0x104000000 (113 sectors)... Done.
 Writing lksecappbak at 0x104020000 (113 sectors)... Done.
 Writing cmnlib at 0x104040000 (386 sectors)... Done.
 Writing cmnlibbak at 0x104080000 (386 sectors)... Done.
 Writing cmnlib64 at 0x1040C0000 (484 sectors)... Done.
 Writing cmnlib64bak at 0x104100000 (484 sectors)... Done.
 Writing keymaster at 0x104140000 (442 sectors)... Done.
 Writing keymasterbak at 0x104180000 (442 sectors)... Done.
 Writing cust at 0x108082000 (657909 sectors)... Done.
 Writing userdata at 0x128082000 (162675 sectors)... Done.
 Writing BackupGPT at NUM_DISK_SECTORS-33. (33 sectors)... Done.
  Applying patch: Update last partition 49 'userdata' with actual size in Backup Header....Done.
  Applying patch: Update Backup Header with LastUseableLBA....Done.
  Applying patch: Update Backup Header with CurrentLBA....Done.
  Applying patch: Update Backup Header with Partition Array Location....Done.
  Applying patch: Update Backup Header with CRC of Partition Array....Done.
  Applying patch: Zero Out Header CRC in Backup Header....Done.
  Applying patch: Update Backup Header with CRC of Backup Header....Done.
 Applying DISK patch... Done.
Reset power ... Done.

Flashing completed in 3 mins 44.544 s