Help hello..read imei failure vivov2111

[loniryan]

Bro you are doing the wrong steps, please read the guides or review the User reports!..

• RPMKey....
  • press READ IMEI and Connect Device on BROM Mode (Testpoint)​
  • After reading the Device and its IMEI's​
  • Please Modify your IMEI Number ​
  • press WRITE IMEI and Connect Device on BROM Mode​

hello..read imei failure vivov2111

14.04.2023 18:45:10 - Connecting to server:
14.04.2023 18:45:11 - Installing LibUsb Drivers..
14.04.2023 18:45:11 - Info : Connect phone to USB in BROM mode
14.04.2023 18:45:11 - BROM Mode : Please, power phone OFF, press and hold "Vol" button and connect USB cable.
14.04.2023 18:45:11 - Searching for a phone. Please wait...
14.04.2023 18:45:18 - Mode : [Preloader] COM9 - MediaTek PreLoader USB VCOM (Android) (COM9)
14.04.2023 18:45:18 - Drivers : MediaTek Inc.,usb2ser.sys [1-22-2016] [3.2.0.0]
14.04.2023 18:45:19 - Checking Device Interface..
14.04.2023 18:45:19 - BROM Mode Found Ok!..
14.04.2023 18:45:19 - Get HW code from device : 0766
14.04.2023 18:45:19 - Get HW & SW version from device... OK
14.04.2023 18:45:19 - CPU : MT6765 (Helio P35/G35)
14.04.2023 18:45:19 - HW Subcode : 0000, HW Version : CA00, SW Version : 0000
14.04.2023 18:45:19 - BL Version : 03
14.04.2023 18:45:19 - Brom Version : FF
14.04.2023 18:45:19 - Secure Boot Device : True
14.04.2023 18:45:20 - SLA Device : False
14.04.2023 18:45:20 - DA Auth : True
14.04.2023 18:45:20 - Disabling WatchDog..
14.04.2023 18:45:20 - Device is Protected..
14.04.2023 18:45:20 - Force Switching From Preloader to BROM Mode..
14.04.2023 18:45:21 - Error : DA_Send [Checsum]..
14.04.2023 18:45:22 - Waiting for Phone Port..
14.04.2023 18:45:22 - Mode : [Preloader] COM9 - MediaTek PreLoader USB VCOM (Android) (COM9)
14.04.2023 18:45:22 - Drivers : MediaTek Inc.,usb2ser.sys [1-22-2016] [3.2.0.0]
14.04.2023 18:45:23 - Preparing Payload..
14.04.2023 18:45:23 - Initiating Disable Security Protocol..
14.04.2023 18:45:23 - Bypassing Security [Type-1]..
14.04.2023 18:45:23 - Opening Device Drivers Interface..
14.04.2023 18:45:23 - Error : Device Interface Not Found!
14.04.2023 18:45:23 - Make Sure Device is Connected!
14.04.2023 18:45:23 - Error on sending payload.
14.04.2023 18:45:23 - Error : Failed to Disable Device Security..
14.04.2023 18:45:23 - Done..

 

[DTPRO Tool]

Mode : [Preloader] COM9 - MediaTek PreLoader USB VCOM (Android) (COM9)

please to Perform the process on the VIVO phones (You need to perform Testpoint Correctly) to enter BROM Mode!!...
please check the log.. the tool is telling you that the Device is in preloader MODE!...

• Steps for to repair IMEI´s on VIvo phone´s (Mediatek)
  • RPMKey....​
    • press READ IMEI and Connect Device on BROM Mode (Testpoint)​
    • After reading the Device and its IMEI's​
    • Please Modify your IMEI Number​
    • press WRITE IMEI and Connect Device on BROM Mode​

Example and User report Report
DTPro - Vivo Y33s (V2109) New Security IMEI repair Ok

 

[loniryan]

Mode : [Preloader] COM9 - MediaTek PreLoader USB VCOM (Android) (COM9)

please to Perform the process on the VIVO phones (You need to perform Testpoint Correctly) to enter BROM Mode!!...
please check the log.. the tool is telling you that the Device is in preloader MODE!...

• Steps for to repair IMEI´s on VIvo phone´s (Mediatek)
  • RPMKey....​
    • press READ IMEI and Connect Device on BROM Mode (Testpoint)​
    • After reading the Device and its IMEI's​
    • Please Modify your IMEI Number​
    • press WRITE IMEI and Connect Device on BROM Mode​

ok understand neet to dissasmply the phone