Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_4h10_Natv-userdebug-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x35
PMTMng : Update PMT Ok!
Prepare target ...
Prepare Ok!
CODE : qogirl6_pubcp_AGCP_DSP.bin
ERASE : L_RUNTIMENV1
CODE : qogirl6_pubcp_LTEA_DSP.bin
CODE : boot.img
ERASE : MISC
UBOOT : lk-sign.bin
CODE : recovery.img
ERASE : METADATA
FSIMG : sec_efs.img
CODE : vbmeta_vendor.img
CODE : vbmeta-sign.img
CODE : teecfg-sign.bin
CODE : sml-sign.bin
UBOOT : u-boot-spl-16k-ufs-sign.bin
FSIMG : cache.img
CODE : unisoc_HD_720_1640.bmp
CODE : gnssmodem-sign.bin
FSIMG : vendor_efs.img
CODE : unisoc_HD_720_1640.bmp
CODE : tos-sign.bin
CODE : qogirl6_pubcp_DM_DSP.bin
UBOOT : u-boot-spl-16k-emmc-sign.bin
CODE : qogirl6_m3l_cm4.bin
FSIMG : socko.img
FSIMG : userdata.img
FSIMG : odmko.img
CODE : dtbo.img
ERASE : SYSDUMPDB
FSIMG : super.img
CODE : EXEC_KERNEL_IMAGE-sign.bin
CODE : vbmeta_system.img
CODE : prodnv.img
CODE : SC9600_qogirl6_pubcp_modem.dat
FSIMG : persist.img
ERASE : UBOOT_LOG
CODE : qogirl6_pubcp_deltanv.bin
Flashing finished!
Reconnect Power/Cable!
