Free All Samsung Mobile Fixed Firmware's Free Here
- Thread starter Abdullah
- Start date
i9300 baseband unknown justwrite efs tar file
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Patch Certificate
Selected model: GT-I9300
Software version: 31.5.1
Waiting ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.1.1
PDA version: I9300XXDLJ1
CSC version: I9300OJVDLJ1
Phone version: I9300XXDLID
Product code: GT-I9300RWDILO
CSC country code: Kenya
CSC sales code: AFR
Phone SN: RF1C966595H
IMEI: 355256741237548
HW version: MP 1.100
RF cal date: 2012.9.18
Chip name: SMDK4X12
Modem board:
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Reading kernel... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.31.5.1
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options' for Android 4.0 - 4.1.2 or
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options' in Android 4.2+.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity and make backup before.
8. Press 'Disable Factory Mode' or 'Patch Sertificate' if needed.
Operation: Patch Certificate
Selected model: GT-I9300
Software version: 31.5.1
Waiting ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.1.1
PDA version: I9300XXDLJ1
CSC version: I9300OJVDLJ1
Phone version: I9300XXDLID
Product code: GT-I9300RWDILO
CSC country code: Kenya
CSC sales code: AFR
Phone SN: RF1C966595H
IMEI: 355256741237548
HW version: MP 1.100
RF cal date: 2012.9.18
Chip name: SMDK4X12
Modem board:
Checking Super user right... true
Reading modem... OK
Patching modem... OK
Writing modem... OK
Reading kernel... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.31.5.1
sm-j727v 7.0 frp done commbanition file+filsh file
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J727V
Software version: 31.5.1
File analysis... OK
Total file size: 0xCF295128 (3314 Mb)
Searching USB Flash interface... COM62 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending NON-HLOS.bin... OK
Sending lksecapp.mbn... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:02:48)
Done with Samsung Tool PRO v.31.5.1
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J727V
Software version: 31.5.1
File analysis... OK
Total file size: 0xCF295128 (3314 Mb)
Searching USB Flash interface... COM62 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending devcfg.mbn... OK
Sending cmnlib.mbn... OK
Sending keymaster.mbn... OK
Sending apdp.mbn... OK
Sending msadp.mbn... OK
Sending NON-HLOS.bin... OK
Sending lksecapp.mbn... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending persist.img.ext4... OK
Sending modem.bin... OK
Sending adspso.bin... OK
Sending cache.img.ext4... OK
Flashing done (time - 00:02:48)
Done with Samsung Tool PRO v.31.5.1
G928P Arabic Turkey Farsi Convert To G928F
G928P Convert To G928F File
Password.. www. file2fix .com
remove space
Last edited by a moderator:
Bro I flash With this File But My Mobile Break Fast Logo He Is Multi Language File
Last edited by a moderator:
anjum_k
Friend's Martview
venossobeny
Active Member
I need original official firmware for galaxy s7 edge model 935t current use 7.0 security patch 1April 2018
Sent from my BLN-L21 using Tapatalk
asadhussain
Active Member
J320P Arabic 4G Fix Firmware
J320P Arabic 4g Fix Rom
key: !L6L33e474F3iGQpK4iE-7PdesnvfY57JgPA9CTLp7uU
Password: www.************
Br Yasir_Gsm
password pls
Convert firmware Samsung S6 G920T to G920F (Android 7.0)
Convert firmware Samsung S6 G920T to G920F (Android 7.0)
DOWNLOAD:
Convert firmware Samsung S6 G920T to G920F (Android 7.0)
DOWNLOAD:
- G920T_V6_B1-B6_TO_G920F_FULL_LANGUAGE.rar (1,3G)
- Br Yasir_Gsm
