DTPro Vivo Y21s (V2110) New security (march 2022) IMEi´s repair Ok!....

[montescarlos]

2022/11/11 13:45:32 - Waiting mtk com port... OK
2022/11/11 13:45:48 - Brom Reconfiging... OK
2022/11/11 13:45:48 - Chipset : MT6768
2022/11/11 13:45:48 - Chipset_ID : Helio P65 OK OK
2022/11/11 13:45:48 - send cert : OK
2022/11/11 13:45:48 - bypass auth security : OK
2022/11/11 13:45:49 - Get ERAM : OK
2022/11/11 13:46:19 - Sending DA File : OK
2022/11/11 13:46:19 - Sending env : OK
2022/11/11 13:46:19 - Start dump emi config...
2022/11/11 13:46:19 - DA::EXT_RAM{G1J9S9}{13014E47314A395339}
2022/11/11 13:46:20 - Sending DA-2 File... OK
2022/11/11 13:46:20 - Booting to security... OK
2022/11/11 13:46:20 - Storage : eMMC
2022/11/11 13:46:20 - Boot1 : 4.00MB
2022/11/11 13:46:20 - Boot2 : 4.00MB
2022/11/11 13:46:20 - RPMB : 16.00MB
2022/11/11 13:46:20 - Userarea : 116.48GB
2022/11/11 13:46:20 - RNID : 6EF207263BE4D56FE07DBB9FD1FC2DCD
2022/11/11 13:46:20 - Writing IMEI to device.... OK
2022/11/11 13:46:44 - Rebooting device... OK

 

[cristhancho]

friend, did you do it with tp? or how is the process?

 

[DTPRO Tool]

friend, did you do it with tp? or how is the process?

Steps to repair IMEi's (Vivo New Sec)

• Run the Mediatek Module
  • go to BROM > Service tab​
  • press LIVE IMEI button​
  • Enter the New IMEI's in the dialog box that has opened and press Ok!​
  • Perform Testpoint on the Device (Device off.)​
  • Connect USB Cable (Without Releasing the Testpoint)​
  • Wait Finish the process.​

Note:
After Device detection you can disconnect/Release the Testpoint.

 

[mansoorshah]

Steps to repair IMEi's (Vivo New Sec)

• Run the Mediatek Module
  • go to BROM > Service tab​
  • press LIVE IMEI button​
  • Enter the New IMEI's in the dialog box that has opened and press Ok!​
  • Perform Testpoint on the Device (Device off.)​
  • Connect USB Cable (Without Releasing the Testpoint)​
  • Wait Finish the process.​

Note:
After Device detection you can disconnect/Release the Testpoint.

sep 2022 security not support or support without test poin ?

 

[DTPRO Tool]

sep 2022 security not support or support without test poin ?

Supported via Test Point! We have reports and the September patch is still supported by DTPRO No problems... in the new security you need to do Testpoint.