UAT OPPO CPH1893 PROBLEM

[cgtecmobile]

1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================

- Connection : EDL
- Method : Auto detect
- Process : Firmware backup
====================================

Waiting for QDLoader port ...
Port found
Device on Port : [ COM5 : Qualcomm HS-USB QDLoader 9008 ]

Analyzing Sahara please wait ...

HW_ID : 00001000000
BLOCK_ID_S : 000000010000000D0000001000000004
BLOCK_ID_H : 5955555565555555
BLOCK_ID_H : 5Q55555556555555

Executing boot : Failed
Please use correct loader or check USB cable | Port

 

[UAT Team]

1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================

- Connection : EDL
- Method : Auto detect
- Process : Firmware backup
====================================

Waiting for QDLoader port ...
Port found
Device on Port : [ COM5 : Qualcomm HS-USB QDLoader 9008 ]

Analyzing Sahara please wait ...

HW_ID : 00001000000
BLOCK_ID_S : 000000010000000D0000001000000004
BLOCK_ID_H : 5955555565555555
BLOCK_ID_H : 5Q55555556555555

Executing boot : Failed
Please use correct loader or check USB cable | Port

Shara Info. is wrong your device is not properly in Sahara EDL Mode .. reconnect device, select model repeat the process.

 

[cgtecmobile]

Shara Info. is wrong your device is not properly in Sahara EDL Mode .. reconnect device, select model repeat the process.

i do same .not work