Legitunlocks.com
Microscope Full Range

UFi Emmc RPMB Clean by Ufi box Post Fail report Here

UFi Box & Dongle
Mohan Das

Mohan Das

Active Member
Nov 27, 2016
17
2
India
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x974697D4
Manufacturing date: Oct 2018
CID: 15010047 4436424D 42019746 97D4A52E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 29.12 GiB(31,268,536,320 bytes)
moviNAND Field firmware update...
Loading ffu: \\emmc\ffu\movinand\new\KMGD6001BM-B421(3).ffu
fw hash code: b572098ec98848d4580f52ccaba975fbe2f6fd1653967e1b9b24485994c4c2fa, size: 300 KiB
part name: KMGD6001BM-B421
controller: VCT0
product name: GD6BMB (0x474436424d42), rev: 0x03
Starting firmware update...
Switch to boot mode(2)... Done
Sending firmware block... Done
Waiting 13s for the card to be ready...
Failed to initiliaze card after update.
Re-initializing card... failed!
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5328
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
 
Vaspal

Vaspal

Member
Oct 5, 2020
13
2
Ukraine
Mohan Das said:
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 3MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x974697D4
Manufacturing date: Oct 2018
CID: 15010047 4436424D 42019746 97D4A52E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 29.12 GiB(31,268,536,320 bytes)
moviNAND Field firmware update...
Loading ffu: \\emmc\ffu\movinand\new\KMGD6001BM-B421(3).ffu
fw hash code: b572098ec98848d4580f52ccaba975fbe2f6fd1653967e1b9b24485994c4c2fa, size: 300 KiB
part name: KMGD6001BM-B421
controller: VCT0
product name: GD6BMB (0x474436424d42), rev: 0x03
Starting firmware update...
Switch to boot mode(2)... Done
Sending firmware block... Done
Waiting 13s for the card to be ready...
Failed to initiliaze card after update.
Re-initializing card... failed!
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5328
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Click to expand...

+1
 
S

shaktiranjan

Junior Member
Jul 13, 2019
3
0
Update eMMC5x Firmware...
eMMC5x Field firmware update...
Firmware version: 0xA2
Loading ffu: \\C:\UFI\emmc\ffu\mmc5x\HYNIX-hB8aP(3).ffu
size: 320 KiB
Setting mode config to FFU mode...Done
Uploading new firmware...Done
Setting mode config to Normal mode...Done
Programming finished with status: 18 (Error in downloading firmware)
New firmware version: 0xA2
Done
 
You must log in or register to reply here.
Top