Chimera Huawei P40 Lite JNY-LX1 Huawei ID Remove Failed to read, try to hard-reset the phone

[Abdullah Ali]

Huawei P40 Lite JNY-LX1 Huawei ID Remove Failed to read, try to hard-reset the phone​

Chimera Mobile Phone Utility version: 28.55.2221 @ 2021-05-27​

Printing phone history​

​

Huawei Id & Frp Remove​

5/27/2021​

9:04​

AM​

​

Huawei Id & Frp Remove​

5/27/2021​

8:59​

AM​

​

Huawei Id & Frp Remove​

5/27/2021​

8:47​

AM​

​

Huawei Id & Frp Remove​

5/27/2021​

8:42​

AM​

​

Removing Huawei account​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files​

Flashing ERECOVERY files​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

If you fail to reconnect the battery, your phone might be still locked after the procedure finished​

Uploading data​

Failed to read, try to hard-reset the phone​

Finished at local time: [05.27.21 11:10:47]​

WorkID: 135776887​

​

 

[Abdullah Ali]

Chimera Mobile Phone Utility version: 28.49.1227 @ 2021-05-26​

Removing Huawei account​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files​

Flashing ERECOVERY files​

Rebooting phone to USB update mode​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

If you fail to reconnect the battery, your phone might be still locked after the procedure finished​

Uploading data​

Servicing the phone​

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.​

The phone will automatically start factory reset, after that it might shut down. You need to turn on the phone afterwards.​

Finished at local time: [05.26.21 15:11:35]​

WorkID: 135653681​

 

[Abdullah Ali]

Chimera Mobile Phone Utility version: 28.56.1213 @ 2021-05-28​

Printing phone history​

​

Get Info​

5/28/2021​

12:30​

PM​

​

Reading certificate...​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files​

Flashing ERECOVERY files​

Failed to flash the eRecovery file, falling back to manual reboot.​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

Uploading data​

Failed to read, try to hard-reset the phone​

Finished at local time: [05.28.21 14:33:25]​

WorkID: 135955091​

 

[ChimeraTool]

Chimera Mobile Phone Utility version: 28.56.1213 @ 2021-05-28​

Printing phone history​

​

Get Info​

5/28/2021​

12:30​

PM​

​

Reading certificate...​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files​

Flashing ERECOVERY files​

Failed to flash the eRecovery file, falling back to manual reboot.​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

Uploading data​

Failed to read, try to hard-reset the phone​

Finished at local time: [05.28.21 14:33:25]​

WorkID: 135955091​

Dear User,

The device is bricked now? Can you boot up the phone in Fastboot mode?

Best regards
Sab
Chimera Team

 

[Softgsm]

Dear User,

The device is bricked now? Can you boot up the phone in Fastboot mode?

Best regards
Sab
Chimera Team

Chimera Mobile Phone Utility version: 29.27.1031 @ 2021-08-09​

Writing certificate...​

Validating certificate files​

Validating C:/Users/USER/Desktop/Huawei/Cert File/​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

Uploading data​

Failed to read, try to hard-reset the phone​

Finished at local time: [08.09.21 16:33:17]​

WorkID: 145584562​

WorkID: 145475015​

WorkID: 145451446​

WorkID: 145349490​

WorkID: 145342593​

Dear Madam/ Sir...

Many time I did try to remove Huawei i'd for Huawei P40 lite and Huawei Y7P but every time I face this error.




But when I try another boxes like Sigma Key and Octoplus Huawei Tool then my phone is done..

so kindly solve this problem Thanks,,

 

[ChimeraTool]

Chimera Mobile Phone Utility version: 29.27.1031 @ 2021-08-09​

Writing certificate...​

Validating certificate files​

Validating C:/Users/USER/Desktop/Huawei/Cert File/​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Please put the phone into factory mode via Test Point!​

Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.​

If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.​

Uploading data​

Failed to read, try to hard-reset the phone​

Finished at local time: [08.09.21 16:33:17]​

WorkID: 145584562​

WorkID: 145475015​

WorkID: 145451446​

WorkID: 145349490​

WorkID: 145342593​

Dear Madam/ Sir...

Many time I did try to remove Huawei i'd for Huawei P40 lite and Huawei Y7P but every time I face this error.




But when I try another boxes like Sigma Key and Octoplus Huawei Tool then my phone is done..

so kindly solve this problem Thanks,,

Dear User,

Yes we are monitoring the problem. This is a common issue nowadays. Probably because the Huawei did some changes. We will react to it for sure.

Best regards
Sab
Chimera Team

 

[Master-Mobile]

Chimera Mobile Phone Utility version: 37.04.0558 @ 2023-09-25
Printing phone history

Write Cert
25-09-2023
06:18

Read Cert
25-09-2023
06:18

Read Cert
25-09-2023
06:17

Read Cert
25-09-2023
06:15

Read Cert
26-08-2023
08:32

Reading certificate...
Uploading data...
Failed to read, try to hard-reset the phone
Finished at local time: [09.25.23 11:28:06]
WorkID: 236116866

 

[Master-Mobile]

Hi all HONOR
MGA-LX9
Failed to read, try to hard-reset the phone

 

[Sardorbek]

Chimera Mobile Phone Utility version: 40.79.1055 @ 2024-10-01
Removing Huawei account
Gathering phone information
Processing phone information
Current firmware version: unknown (unknown/unknown) @ unknown
Uploading data...
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
Operation failed
Finished at local time: [10.01.24 19:24:19]
WorkID: 311126887

 

[ChimeraTool]

Chimera Mobile Phone Utility version: 40.79.1055 @ 2024-10-01
Removing Huawei account
Gathering phone information
Processing phone information
Current firmware version: unknown (unknown/unknown) @ unknown
Uploading data...
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
Operation failed
Finished at local time: [10.01.24 19:24:19]
WorkID: 311126887

Dear User,

Please try to connect the device in Fastboot mode first, and use the Load Factory Fastboot procedure to enter Factory mode.
If it still doesn't work, try reflashing the device first, if possible.

Best Regards,
ChimeraTeam