World First REDMI 6A IMEI REPAIR without donge and authentication
- Thread starter prasadmca22
- Start date
Bikram naha
Active Member
- Sep 30, 2019
- 37
- 22
Mohd faeem
Active Member
- Oct 3, 2019
- 25
- 16
- PayPal:
-
All GSM File
Member
REDMI 6/6A IMEI REPAIR SOLUTION
Page Link :EXTRA GIFT (REDMI 6/6A IMEI REPAIR) FOR ALL USERS:
HI, World First, Hare I share a unique method of REDMI 6/6A IMEI REPAIR. So, Stay Tuned. See Bellow Picture and follow the all steps. IMEI Null, Unable To Get IMEI, IMEI 0, Single IMEI, and all problems will solve using this Method. One More problem has come With Redmi 6/6a like BaseBand Unknown.What is the Reason for being Unable to get IMEI?
- When You flash with Sp Flash Tool Using Format+Download Then The Problem will Come (Unable To Get IMEI ). Because this method will performed for erase all data (including NV)
- When hanging on the logo then try too many flashes but not success. Then You Going to Repair the EMMC Method Via UFI/EasyJ-Tag/Etc then may come this problem.
- Or using Format Whole FLash command with any Other Tool by Wrong Method then this problem will come (Unable To Get IMEI ).
How To Write & Restore IMEI
How To Write & Restore IMEI?
- First Need Remove Register and Take it in safe Place. Now hardware mode is Unlock.
- NOW PATCH & FORMAT ON UMT TOOL, OR USING ANY OTHER TOOL SO, ERASE NV DATA
- Then Write With any Tool.
- After all, Processes Replace The Remove Resistor Witch you Remove From Board.
- No need Eng Firmware
Downloads For Redmi 6/6A
Firmware for Dead After Flash 6A (Cactus)FIrmware for Engg Rom For 6a Cactus
6/6A Eng Rom
Firmware for Redmi 6(Cerus) Dead After Flash
Succes Log of Unable to get IMEI 6/6A
Operation: IMEI Repair [META (New)]Checking for existing META ports…
No existing META port was found.
Hold VOL UP + DOWN and connect USB Cable.
Some phones may have different key combinations for BROM mode.
Waiting for the device in BROM mode…
Port: COM10
Port Name: MediaTek USB Port (COM10)
Path: \\?\usb#vid_0e8d&pid_0003#5&105948fe&1&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog…
– Success
Sending Payload data…
– Payload sent
Initiating Control Transfer…
– Done
Waiting for the result…
Disable Auth Success
Preloader saved as: preloader_cereus_210715_210408.bin
Found MediaTek USB Port (COM10) on COM10
Device Path : usb\vid_0e8d&pid_0003&rev_0100
Mode: BROM
Rebooting to META mode…
Waiting for the phone in META mode…
Found MediaTek USB VCOM (Android) (COM16) on COM16
Device Path : \\?\usb#vid_0e8d&pid_200e#8119d37b7d25#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Configuring Communication Channel…
Reading phone information…
CPU : MT6765
SW Ver. : MOLY.LR12A.R2.MP.V24.32.P71
HW Ver. : WINGTECH_O1MP6_K62V1_64_BSP_HW
IMEI1 : 151515151515151
IMEI2 : 151515151515151
Reading data from phone…
Repairing IMEI1 to 86815003428733xxx
Repairing IMEI2 to 8681500342873xxxx
Syncing Data…
Operation Finished.
[UltimateMTK Ver. 4.4]
How Solve Unknown Baseband Problem?
Need to know why come this problem, Sure You Solve your problem by Using This this trick.- First remove the resistor, which was given above photos.
- Then write full flash With Sp Flash tool (Only Download ), Don’t use format +download.
- Now check Baseband If Not Come The Rewrite Eng Firmware.
- Now Must come to Baseband Then Write Pach By using the UMT tool.
- Then Write IMEI
- Now Write Flash File.
If you are facing any problem using these methods so you can contact me
All Above Files and Link Verified and 100% Tested BY our Technicians, So Don’t Worry Follow All Step’s By Step’s and Keep Enjoy With Us You Can Donate For our Technician By the Bellow Information:>>>>
Disclaimer:-
This Content is Only and Only For Educational purposes. We and our Website will not responsible. Don’t use it in Any illegal Activities. Here I just Sowing this method to use For yourself. I Never Ever Force Anyone to use crack or PIRATED software. Welcome to my Website, I am Kazi Selim Osman, from West Bengal, India Here I upload all videos/posts about mobile repairing, software issues, and also the latest technology videos/posts. I Always happy to help every person.Note – We will not be responsible for any loss or damage whatsoever caused if you will attempt or follow my video. Please do it at your own risk.