Legitunlocks.com
Chia Farm Land

Solved Oppo A1k CPH1923 Passcode Remove And Factory Reset Without Flash

This topic has been solved
vijayvilasbhos3

vijayvilasbhos3

Junior Member
Jan 25, 2020
3
0
oppo A1K PASSWORD NOT RESET
2 TIME FACTORY RESET BUT STILL
SET ON LOCK CONDITION



VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 1MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x4658689C
Manufacturing date: Aug 2019
CID: 15010051 4436334D 42034658 689C86AA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

Factory Reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Wrote 30316915 blocks, expected to write 110592 blocks
Done
Creating filesystem with parameters:
Size: 23765954560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8160
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 5802235
Block groups: 178
Reserved block group size: 1024
Created filesystem with 11/1452480 inodes and 135204/5802235 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0A0C4
Wrote 50411262 blocks, expected to write 5802235 blocks
Done
Done
 
Doszhan707

Doszhan707

Junior Member
Jan 17, 2021
1
0
QAZAQSTAN
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8843-1639
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0xB7C006D1
Manufacturing date: РёСЋРЅ 2019
CID: 15010051 4436334D 4203B7C0 06D1664A
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6762_18540, name: CPH1923
brand: OPPO, model: CPH1923 (OPPO A1k)
build model list: CPH1923 (OPPO A1k)
build id: PPR1.180610.011, version: 9 Pie (CPH1923EX_11_A.38)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20201221.133342 release-keys

crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G
-------------------------- help me. after reset, it does not turn on, does not charge ** full brick **---------------------
 
You must log in or register to reply here.
Top