Legitunlocks.com
Microscope Full Range

UFi oppo a5s dead boot

UFi Box & Dongle
M

mena_ishak

Member
Sep 17, 2017
6
0
egypt
cph1909 dead after format iam did isp because vol +- not work
now phone is dead iam writeing full dump and flash scatter withou result

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 00
Boot version: 1.04
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x544006F0
Manufacturing date: Dec 2018
CID: 15010047 4436424D 42015440 06F0C55E
CSD: D0270132 0F5903FF F6DBFFEF 8E406068
Permanent write protection enabled
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: , cpu abi: arm64-v8a
manufacturer: OPPO
board: , name:
brand: , model:
build id: O11019, version: 8.1.0 Oreo ()
build description: full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G
 
Sweetsonu984

Sweetsonu984

Friend's Martview
May 30, 2020
110
37
India
mena_ishak said:
cph1909 dead after format iam did isp because vol +- not work
now phone is dead iam writeing full dump and flash scatter withou result

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 00
Boot version: 1.04
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x544006F0
Manufacturing date: Dec 2018
CID: 15010047 4436424D 42015440 06F0C55E
CSD: D0270132 0F5903FF F6DBFFEF 8E406068
Permanent write protection enabled
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: , cpu abi: arm64-v8a
manufacturer: OPPO
board: , name:
brand: , model:
build id: O11019, version: 8.1.0 Oreo ()
build description: full_oppo6765_18511-user 8.1.0 O11019 1603200649 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G
Click to expand...

please check isp welder connection, check clk or solding point any think damage.
 
F

fitco

Active Member
Nov 5, 2019
55
17
check cmd line if its cut
 

Attachments

  • cmd line a5s.png
    cmd line a5s.png
    108.6 KB · Views: 27
You must log in or register to reply here.
Top