UFI ISP ADAPTER VCC, VCCQ, Voltage Problem Solved

[farhanab]

UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.
View attachment 2901

There are 2 version of UFI ISP Adapter available in the market

View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.

View attachment 2899

I hope it will work fine after these modifications.

View attachment 2902

Best Regards
Only Press Thanks Button

i have version two but still show same arare

 

[chitranshgi]

i have version two but still show same arare

Isp pinout connection problem please check it carefully

 

[farhanab]

Isp pinout connection problem please check it carefully

g
thank after cont usb arere removed

Please login to view image

 

[Rattanak]

i got a V2 Adaptor and it exactly the same error to the
chitranshgi ....

 

[chitranshgi]

i got a V2 Adaptor and it exactly the same error to the
chitranshgi ....

check isp pinout carefully adaptor wil work 100%

 

[Knowledge]

g
thank after cont usb arere removed

View attachment 7693

hi can i know how did you solve your problem..

 

[mdwasil]

Mera bhi same problem ho raha hai

 

[tjjxxs1]

UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.

View attachment 2901

There are 2 version of UFI ISP Adapter available in the market

View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.

View attachment 2899

I hope it will work fine after these modifications.

View attachment 2902

Best Regards
Only Press Thanks Button

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3844
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD55 error, cmd response: 0xB36EB69F, card state: 255 (Card is in unknown state)

i am useing adapter v2 still getting these errors on samsung j100h is there anything to slove this problem ?

 

[Rana Bilal Shafqat]

u.m.t dongle pinout picture yu have vccq no gnd but on card reader picture yu have gnd but no vccq

Please login to view image

 

[babu777]

Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.

 

[babu777]

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-6147
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0xFFFFFFFF, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---









my new box problem

 

[ravishukla]

Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat

 

[ravishukla]

i do every think but my problam is same befor

 

[Mdzee]

I have problem mi note5 pro plz help

Please login to view image

 

[shalu]

VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 0, CMD Error: ) !!!
CMD0 error, cmd response: 0x0, card state: 0 (Card is in unknown state)
GO_IDLE_STATE command failed.

 

[yasir ali]

hi sir i have Y9-2019 JKJM-LX1 i want boot repair but idnintfy error plz helpme how to sove this problem

Please login to view image

 

[SHOEB AHMED]

@ yasir ali

Check eMMC isp pins and connection

 

[akshgiri]

thanks

 

[dj56140]

SIR MY BOX WORKING FINE BUT NOW ANY TIME SHOW CMD ERROR

 

[Jonatan_81]

please!!

Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2367
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---