Successfully Repaired with Medusa Box
Please Post Here your Successfully Repaired Phone with Medusa Box.
Thank You.
Please Post Here your Successfully Repaired Phone with Medusa Box.
Thank You.
Last edited:
Successfully Repaired With Medusa Pro Box
- Thread starter maanarman
- Start date
Admin
Administrator
Motorola Xt1068 Dead Repair Done
Code:
Welcome to Medusa Pro Software version 1.6.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AGND3R
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010041474E443352016FF8E225A27D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AGND3R
Product revision : 0.1
Product serial number : (hex) 6FF8E225
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/AGND3R_26_08_2018_19_44_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/AGND3R_Gpt_0x0_0x100_26_08_2018_19_44_14.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/AGND3R_Cid_0x29112_0x100_26_08_2018_19_44_14.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.0; FW: 1.23.MOTOROLA XT1080 REPLACE EMMC AND REPAIR DONE WITH MEDUSA PRO
LOGS
LOGS
Code:
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SDW32G
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 4501005344573332470139433F2815CB
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SDW32G
Product revision : 0.1
Product serial number : (hex) 39433F28
Manufacturing date : 01/2018
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFEF8A40401F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 14385152 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 3473408
Number of sectors : 6914048
Device Manufacturer :motorola
Device Platform :apq8084
Build ID :MCG24.251-5-5
Display Build ID :MCG24.251-5-5
Release ID :6.0.1
Device Model :XT1254
Device Name :quark_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :quark_verizon-user 6.0.1 MCG24.251-5-5 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SDW32G_29_08_2018_19_26_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00040000) 128 MB
P02: sbl1 (00040100, 00000300) 384 KB
P03: sdi (00040500, 00000070) 56 KB
P04: sec (00040700, 00000020) 16 KB
P05: ddr (00040720, 00000040) 32 KB
P06: aboot (00040800, 00000800) 1024 KB
P07: rpm (000413B8, 00000200) 256 KB
P08: utags (000417A0, 00000400) 512 KB
P09: tz (00041BA0, 000003E8) 500 KB
P10: factorytune1 (00041F88, 00001800) 3072 KB
P11: padA (00043788, 00000878) 1084 KB
P12: sbl1bak (00044000, 00000300) 384 KB
P13: abootBackup (00044400, 00000800) 1024 KB
P14: rpmBackup (00044FB8, 00000200) 256 KB
P15: utagsBackup (000453A0, 00000400) 512 KB
P16: tzBackup (000457A0, 000003E8) 500 KB
P17: mdm1m9kefs1 (00045B88, 00000800) 1024 KB
P18: mdm1m9kefs2 (00046388, 00000800) 1024 KB
P19: padB (00046B88, 00001078) 2108 KB
P20: frp (00047C00, 00000400) 512 KB
P21: logs (00048000, 00001000) 2048 KB
P22: persist (00049000, 00010000) 32 MB
P23: mdm1hob (00059000, 00000200) 256 KB
P24: mdm1dhob (00059200, 00000040) 32 KB
P25: sp (00059240, 00000800) 1024 KB
P26: cid (00059A40, 00000100) 128 KB
P27: pds (00059B40, 00001800) 3072 KB
P28: logo (0005B340, 00004000) 8 MB
P29: clogo (0005F340, 00005800) 11 MB
P30: misc (00064B40, 00000800) 1024 KB
P31: padC (00065340, 00000CC0) 1632 KB
P32: mdm1m9kefs3 (00066000, 00000618) 780 KB
P33: mdm1m9kefsc (00066700, 00000002) 1024 b
P34: ssd (00066702, 00000010) 8 KB
P35: kpan (00066712, 00004000) 8 MB
P36: boot (0006A800, 00008000) 16 MB
P37: recovery (00072800, 00008020) 16.02 MB
P38: factorytune2 (0007A820, 00008040) 16.03 MB
P39: cache (00082860, 002CD7A0) 1435 MB
P40: system (00350000, 00698000) 3376 MB
P41: userdata (009E8000, 03045F00) 24.14 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SDW32G_Gpt_0x0_0x100_29_08_2018_19_26_06.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SDW32G_Cid_0x59a40_0x100_29_08_2018_19_26_06.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sdi... Done.
Erasing partition sec... Done.
Erasing partition ddr... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition utags... Done.
Erasing partition tz... Done.
Erasing partition factorytune1... Done.
Erasing partition padA... Done.
Erasing partition sbl1bak... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition mdm1m9kefs1... Done.
Erasing partition mdm1m9kefs2... Done.
Erasing partition padB... Done.
Erasing partition frp... Done.
Erasing partition logs... Done.
Erasing partition persist... Done.
Erasing partition mdm1hob... Done.
Erasing partition mdm1dhob... Done.
Erasing partition sp... Done.
Erasing partition cid... Done.
Erasing partition pds... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition misc... Done.
Erasing partition padC... Done.
Erasing partition mdm1m9kefs3... Done.
Erasing partition mdm1m9kefsc... Done.
Erasing partition ssd... Done.
Erasing partition kpan... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition factorytune2... Done.
Erasing partition cache... Done.
Erasing partition system... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.0; FW: 1.23.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/Sandisk eMMC SEM32G_Wed Aug 29 2018_19_12_53.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.0; FW: 1.23.Motorola Xt1060 Replace eMMC and Repair done
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932011B53B76F6039
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 1B53B76F
Manufacturing date : 06/2013
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_04_09_2018_18_42_47.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 001FCC00) 1018 MB
P37: padC (00257800, 00000800) 1024 KB
P38: system (00258000, 00300000) 1536 MB
P39: customize (00558000, 00036000) 108 MB
P40: userdata (0058E000, 017C3F00) 11.88 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_04_09_2018_18_42_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_04_09_2018_18_42_47.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/motox/Sandisk eMMC SEM16G_Tue Sep 4 2018_18_21_02.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.6; FW: 1.24.Motorola Ultra mini Replace eMMC and Repair done
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932015AC8F47B3141
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 5AC8F47B
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 3244032
Number of sectors : 4325376
Device Manufacturer :motorola
Device Platform :msm8960
Build ID :SU6-7.7
Display Build ID :SU6-7.7
Release ID :4.4.4
Device Model :XT1080
Device Name :obake_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :obake_verizon-user 4.4.4 SU6-7.7 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_04_09_2018_22_24_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 01611F00) 11.04 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_04_09_2018_22_24_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_04_09_2018_22_24_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.6; FW: 1.24.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/Sandisk eMMC SEM16G_Tue Sep 4 2018_22_02_30.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.6; FW: 1.24.Motorola Ultra mini Replace eMMC and Repair done
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932015AC8F47B3141
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 5AC8F47B
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 3244032
Number of sectors : 4325376
Device Manufacturer :motorola
Device Platform :msm8960
Build ID :SU6-7.7
Display Build ID :SU6-7.7
Release ID :4.4.4
Device Model :XT1080
Device Name :obake_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :obake_verizon-user 4.4.4 SU6-7.7 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_04_09_2018_22_24_10.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 01611F00) 11.04 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_04_09_2018_22_24_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_04_09_2018_22_24_10.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.6; FW: 1.24.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/Sandisk eMMC SEM16G_Tue Sep 4 2018_22_02_30.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.6; FW: 1.24.Moto G 2nd Gen Replace And Repair eMMC Done
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC MAG4FB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1501004D4147344642F72A06F4BFBF7D
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : MAG4FB
Full name : KLMAG4FE4B-B002
Product revision : 15.7
Product serial number : (hex) 2A06F4BF
Manufacturing date : 11/2012
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFFF8E40406D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7659520 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/MAG4FB_03_09_2018_16_34_00.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/MAG4FB_Gpt_0x0_0x100_03_09_2018_16_34_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/MAG4FB_Cid_0x29112_0x100_03_09_2018_16_34_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 1.6.6; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.6; FW: 1.24.Motorola Xt1068 Replace And Repair eMMC Done
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010030313647393201D648F3146127
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) D648F314
Manufacturing date : 06/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_05_09_2018_21_24_34.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_05_09_2018_21_24_34.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_05_09_2018_21_24_34.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.6; FW: 1.24.
Disconnected.MOTOROLA XT1068 REPLACE AND REPAIR EMMC DONE
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010030313647393201604DC2BD71CB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 604DC2BD
Manufacturing date : 07/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_11_09_2018_20_46_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_11_09_2018_20_46_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_11_09_2018_20_46_42.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.6; FW: 1.24.Motorola Xt1068 Replace And Repair eMMC With Medusa Pro
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932018C898E7A31C3
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 8C898E7A
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_24_09_2018_21_13_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_24_09_2018_21_13_50.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_24_09_2018_21_13_50.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.6; FW: 1.24.Moto G XT1068 Replace and repair Emmc
Last edited by a moderator:
Motorola Xt1080 Unfortunately Error Fix Done
Code:
Welcome to Medusa Pro Software version 1.6.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM32G
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 45010053454D33324707D01A865B90CB
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM32G
Product revision : 0.7
Product serial number : (hex) D01A865B
Manufacturing date : 09/2013
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF8A40407F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Max enhanced data size: 15253504 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 3244032
Number of sectors : 4325376
Device Manufacturer :motorola
Device Platform :msm8960
Build ID :SU6-7.7
Display Build ID :SU6-7.7
Release ID :4.4.4
Device Model :XT1080
Device Name :obake_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :obake_verizon-user 4.4.4 SU6-7.7 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SEM32G_22_09_2018_18_44_52.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 032F5F00) 25.48 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM32G_Gpt_0x0_0x100_22_09_2018_18_44_52.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM32G_Cid_0x48210_0x100_22_09_2018_18_44_52.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.6; FW: 1.24.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/Sandisk eMMC SEM32G_Sat Sep 22 2018_18_21_58.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.6; FW: 1.24.Motorola Xt1068 Dead Repair With Replace eMMC
Code:
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932015A572FA33141
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 5A572FA3
Manufacturing date : 03/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_27_09_2018_15_23_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.6; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_27_09_2018_15_23_38.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_27_09_2018_15_23_38.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.6; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.6; FW: 1.24.Motorola XT1068 Replace And Repair eMMC Done
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932010E8F779641CB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) E8F7796
Manufacturing date : 04/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 3244032
Number of sectors : 4325376
Device Manufacturer :motorola
Device Platform :msm8960
Build ID :SU6-7.7
Display Build ID :SU6-7.7
Release ID :4.4.4
Device Model :XT1080
Device Name :obake_verizon
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :obake_verizon-user 4.4.4 SU6-7.7 5 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_06_10_2018_20_56_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 01611F00) 11.04 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_06_10_2018_20_56_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_06_10_2018_20_56_41.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932010E8F779641CB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) E8F7796
Manufacturing date : 04/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_06_10_2018_20_58_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
Switched to boot area partition 1.
Opening D:/111111/XT1068 16GB OK/boot1 Samsung eMMC VYL00M_08_03_2018_21_42_43.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Switched to boot area partition 2.
Opening D:/111111/XT1068 16GB OK/boot2 Samsung eMMC VYL00M_08_03_2018_21_43_33.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Switched to user area.
Opening D:/111111/XT1068 16GB OK/userdata Samsung eMMC VYL00M_08_03_2018_21_44_30.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932010E8F779641CB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) E8F7796
Manufacturing date : 04/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_06_10_2018_21_03_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_06_10_2018_21_03_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_06_10_2018_21_03_16.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.7; FW: 1.24.Motorola Xt1068 eMMC Replace And Repair Done
Code:
Welcome to Medusa Pro Software version 1.6.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010030313647393201088E45736165
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 88E4573
Manufacturing date : 06/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_13_10_2018_18_15_53.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 019DD700) 12.93 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_13_10_2018_18_15_53.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_13_10_2018_18_15_53.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.7; FW: 1.24.Moto G XT1068 Replace And Repair eMMC Done
Code:
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003031364739320108D2739B50D9
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 8D2739B
Manufacturing date : 05/2013
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_14_10_2018_20_35_50.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_14_10_2018_20_35_50.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_14_10_2018_20_35_50.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.7; FW: 1.24.Motorola Xt1058 Dead Repair Done
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 11010030313647393200C712049820DB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.0
Product serial number : (hex) C7120498
Manufacturing date : 02/2013
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_04_08_2018_23_54_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 001FCC00) 1018 MB
P37: padC (00257800, 00000800) 1024 KB
P38: system (00258000, 00300000) 1536 MB
P39: customize (00558000, 00036000) 108 MB
P40: userdata (0058E000, 017C3F00) 11.88 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_04_08_2018_23_54_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x48210_0x100_04_08_2018_23_54_55.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Write data verification is enabled.
Write partitions from C:/Users/test/Desktop/samar/Sandisk eMMC SEM16G_Sat Aug 4 2018_23_20_40.mpt file...
Writing partition GPT... Done.
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition sbl2... Done.
Writing partition sbl3... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition utags... Done.
Writing partition logs... Done.
Writing partition padA... Done.
Writing partition sbl2Backup... Done.
Writing partition sbl3Backup... Done.
Writing partition abootBackup... Done.
Writing partition rpmBackup... Done.
Writing partition tzBackup... Done.
Writing partition utagsBackup... Done.
Writing partition padB... Done.
Writing partition modemst1... Done.
Writing partition modemst2... Done.
Writing partition mbl... Done.
Writing partition hob... Done.
Writing partition dhob... Done.
Writing partition persist... Done.
Writing partition ssd... Done.
Writing partition fsg... Done.
Writing partition sp... Done.
Writing partition misc... Done.
Writing partition pds... Done.
Writing partition cid... Done.
Writing partition logo... Done.
Writing partition clogo... Done.
Writing partition devtree... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition kpan... Done.
Writing partition cache... Done.
Writing partition padC... Done.
Writing partition customize... Done.
SW: 1.6.0; FW: 1.23.Motorola Xt1068 Repair eMMC And Repair Done
Code:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 1101003031364739320118523435115B
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 0.1
Product serial number : (hex) 18523435
Manufacturing date : 01/2014
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/016G92_05_10_2018_18_04_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Gpt_0x0_0x100_05_10_2018_18_04_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/016G92_Cid_0x29112_0x100_05_10_2018_18_04_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.7; FW: 1.24.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.7; FW: 1.24.
Camilo_Alves
Member
- Apr 9, 2019
- 8
- 0