NOKIA 105 TA 1010 HANG ON LOGO AND POWER OFF SOLVED....WITH FLASHING
Card found : DE987C97 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20
Operation : Identify [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found !
Check cable, connection and drivers!
Reconnect Power/Cable!
Open VPLfile : TA-1010_059Z182_30.04.11.vpl
Description : TA-1010 IM
DeviceType : TA-1010
ProductCode : 059Z182
SoftwareVer : 30.04.11
PPM LangPack :
[1] : Hindi (India)
[2] : Urdu (Islamic Republic of Pakistan)
[3] : Arabic (Saudi Arabia)
[4] : English (United Kingdom)
Load Ok!
Firmare path for FeaturePhone products NOT set!
Select it in settings first!
Firmare path for FeaturePhone products NOT set!
Select it in settings first!
Operation : Read FirmWare [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Nokia USB Serial Port (COM3)
MODE : NOKIA USB SERIAL
PORT : 3
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 49D7E806CC69ED36DB664F8395F77F47
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003
Boot done!
SWVer : N103.30.04.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
CODE : 0x00370000
Reading Flash ...
TDSN : TA-1010
PRDC : 059Z1B8
PPM : MH
LANG :
[1] : Gujarati (India)
[2] : Kannada (India)
[3] : Marathi (India)
[4] : Telugu (India)
[5] : Punjabi (India)
[6] : Tamil (India)
[7] : Hindi (India)
[8] : Urdu (Islamic Republic of Pakistan)
[9] : English (United Kingdom)
BUILD : TA-1010_ROM_eMP_30.04.11
BUILD : TA-1010_LANG_PACK_ROM_MH_eMP_30.04.11_001
BUILD : TA-1010_CUSTPACK_ROM_MH_eMP_30.04.11_001
BUILD : TA-1010_JUMP_TABLE_MH_eMP_30.04.11_001
BUILD : TA-1010_VIVA_eMP_30.04.11
Make VPL definition
Save Path : C:\Users\Sonu Telecom Qadian\Desktop\TA-1010\
Save Name : TA-1010_059Z1B8_30.04.11.vpl
Build Finished!
Done!
Elapsed: 00:02:51
Reconnect Power/Cable!
Open VPLfile : TA-1010_059Z182_30.04.11.vpl
Description : TA-1010 IM
DeviceType : TA-1010
ProductCode : 059Z182
SoftwareVer : 30.04.11
PPM LangPack :
[1] : Hindi (India)
[2] : Urdu (Islamic Republic of Pakistan)
[3] : Arabic (Saudi Arabia)
[4] : English (United Kingdom)
Load Ok!
Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Nokia USB Serial Port (COM3)
MODE : NOKIA USB SERIAL
PORT : 3
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 49D7E806CC69ED36DB664F8395F77F47
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E
NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST
STATUS : OK
BSTYLE : SF_FLASH_BOOT
Boot done!
VPL SoftwareVersion : 30.04.11 [TA-1010]
DEV SoftwareVersion : 30.04.11
SWInfo compare result : SAME
Load FlashSet :
MROM : TA-1010_ROM_eMP_30.04.11
LANG : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
CUST : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
JUMP : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
VIVA : TA-1010_VIVA_eMP_30.04.11
Prepare FlashSet :
DCR : TA-1010_ROM_eMP_30.04.11
DCR : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
DCR : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
DCR : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
DCR : TA-1010_VIVA_eMP_30.04.11
Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format Ok!
Erase Target Flash
Erase done!
Write Target Flash
Write : TA-1010_ROM_eMP_30.04.11
Write : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
Write : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
Write : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
Write : TA-1010_VIVA_eMP_30.04.11
Write done, waiting target response ...
Write flash done!
Verify Target FlashContent
Verify : TA-1010_ROM_eMP_30.04.11
Verify : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
Verify : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
Verify : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
Verify : TA-1010_VIVA_eMP_30.04.11
Done!
Elapsed: 00:00:58
Reconnect Power/Cable!
Card found : DE987C97 , v0122
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20
Operation : Identify [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
Device not found !
Check cable, connection and drivers!
Reconnect Power/Cable!
Open VPLfile : TA-1010_059Z182_30.04.11.vpl
Description : TA-1010 IM
DeviceType : TA-1010
ProductCode : 059Z182
SoftwareVer : 30.04.11
PPM LangPack :
[1] : Hindi (India)
[2] : Urdu (Islamic Republic of Pakistan)
[3] : Arabic (Saudi Arabia)
[4] : English (United Kingdom)
Load Ok!
Firmare path for FeaturePhone products NOT set!
Select it in settings first!
Firmare path for FeaturePhone products NOT set!
Select it in settings first!
Operation : Read FirmWare [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Nokia USB Serial Port (COM3)
MODE : NOKIA USB SERIAL
PORT : 3
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 49D7E806CC69ED36DB664F8395F77F47
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003
Boot done!
SWVer : N103.30.04.11.p1
FLASH : 00C2 : 0025 : 0036 : 0000
CODE : 0x00370000
Reading Flash ...
TDSN : TA-1010
PRDC : 059Z1B8
PPM : MH
LANG :
[1] : Gujarati (India)
[2] : Kannada (India)
[3] : Marathi (India)
[4] : Telugu (India)
[5] : Punjabi (India)
[6] : Tamil (India)
[7] : Hindi (India)
[8] : Urdu (Islamic Republic of Pakistan)
[9] : English (United Kingdom)
BUILD : TA-1010_ROM_eMP_30.04.11
BUILD : TA-1010_LANG_PACK_ROM_MH_eMP_30.04.11_001
BUILD : TA-1010_CUSTPACK_ROM_MH_eMP_30.04.11_001
BUILD : TA-1010_JUMP_TABLE_MH_eMP_30.04.11_001
BUILD : TA-1010_VIVA_eMP_30.04.11
Make VPL definition
Save Path : C:\Users\Sonu Telecom Qadian\Desktop\TA-1010\
Save Name : TA-1010_059Z1B8_30.04.11.vpl
Build Finished!
Done!
Elapsed: 00:02:51
Reconnect Power/Cable!
Open VPLfile : TA-1010_059Z182_30.04.11.vpl
Description : TA-1010 IM
DeviceType : TA-1010
ProductCode : 059Z182
SoftwareVer : 30.04.11
PPM LangPack :
[1] : Hindi (India)
[2] : Urdu (Islamic Republic of Pakistan)
[3] : Arabic (Saudi Arabia)
[4] : English (United Kingdom)
Load Ok!
Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : Nokia USB Serial Port (COM3)
MODE : NOKIA USB SERIAL
PORT : 3
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 49D7E806CC69ED36DB664F8395F77F47
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : N103.30.04.11.p1
BOOT : SWR : 30.04.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : N103.30.04.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E
NOR: 00EF : 0070 : 0016 : 0000
NOR: [Winbond] SF_W25Q32JV
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST
STATUS : OK
BSTYLE : SF_FLASH_BOOT
Boot done!
VPL SoftwareVersion : 30.04.11 [TA-1010]
DEV SoftwareVersion : 30.04.11
SWInfo compare result : SAME
Load FlashSet :
MROM : TA-1010_ROM_eMP_30.04.11
LANG : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
CUST : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
JUMP : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
VIVA : TA-1010_VIVA_eMP_30.04.11
Prepare FlashSet :
DCR : TA-1010_ROM_eMP_30.04.11
DCR : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
DCR : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
DCR : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
DCR : TA-1010_VIVA_eMP_30.04.11
Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format Ok!
Erase Target Flash
Erase done!
Write Target Flash
Write : TA-1010_ROM_eMP_30.04.11
Write : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
Write : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
Write : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
Write : TA-1010_VIVA_eMP_30.04.11
Write done, waiting target response ...
Write flash done!
Verify Target FlashContent
Verify : TA-1010_ROM_eMP_30.04.11
Verify : TA-1010_LANG_PACK_ROM_IM_eMP_30.04.11_001
Verify : TA-1010_CUSTPACK_ROM_IM_eMP_30.04.11_001
Verify : TA-1010_JUMP_TABLE_IM_eMP_30.04.11_001
Verify : TA-1010_VIVA_eMP_30.04.11
Done!
Elapsed: 00:00:58
Reconnect Power/Cable!